Add the drm_panel_prepare_power and drm_panel_unprepare_power control. Turn on panel power(drm_panel_prepare_power) and control before dsi enable. And then dsi enable, send dcs cmd in drm_panel_prepare, last turn on backlight. Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx> --- drivers/gpu/drm/mediatek/mtk_dsi.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index 224afb666881..b635724b209b 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -563,10 +563,15 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits, htotal * dsi->lanes); + if (dsi->panel) { + if (drm_panel_prepare_power(dsi->panel)) + DRM_INFO("can't prepare power the panel\n"); + } + ret = clk_set_rate(dsi->hs_clk, dsi->data_rate); if (ret < 0) { dev_err(dev, "Failed to set data rate: %d\n", ret); - goto err_refcount; + goto err_prepare_power; } phy_power_on(dsi->phy); @@ -605,13 +610,18 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) } return 0; + err_disable_digital_clk: clk_disable_unprepare(dsi->digital_clk); err_disable_engine_clk: clk_disable_unprepare(dsi->engine_clk); err_phy_power_off: phy_power_off(dsi->phy); -err_refcount: +err_prepare_power: + if (dsi->panel) { + if (drm_panel_unprepare_power(dsi->panel)) + DRM_INFO("Can't unprepare power the panel\n"); + } dsi->refcount--; return ret; } @@ -652,6 +662,11 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi) clk_disable_unprepare(dsi->digital_clk); phy_power_off(dsi->phy); + + if (dsi->panel) { + if (drm_panel_unprepare_power(dsi->panel)) + DRM_INFO("Can't unprepare power the panel\n"); + } } static void mtk_output_dsi_enable(struct mtk_dsi *dsi) -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel