On Mon, Nov 4, 2019 at 10:58 AM Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> wrote: > > In an effort to repurpose lvds-encoder.c to also serve the > function of LVDS decoders, we ended up defining a new "generic" > compatible string, therefore adapt the dt-bindings to fit the > new purpose. Also, convert the dt-bindings from .txt to .yaml > while at it. "Also, ... while at it." is a sign for split into 2 patches. > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> > > --- > v1->v2: > * Converted to dt-schema as per Neil's comment > --- > .../bindings/display/bridge/lvds-codec.yaml | 117 +++++++++++++++++++++ > .../bindings/display/bridge/lvds-transmitter.txt | 66 ------------ > 2 files changed, 117 insertions(+), 66 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt > > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > new file mode 100644 > index 0000000..ff79bc2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml > @@ -0,0 +1,117 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Trasnparent LVDS encoders and LVDS decoders Typo > + > +maintainers: > + - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > + > +description: | > + This binding supports transparent LVDS encoders and LVDS decoders that don't > + require any configuration. > + > + LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple > + incompatible data link layers have been used over time to transmit image data > + to LVDS panels. This binding targets devices compatible with the following > + specifications only. > + > + [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February > + 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) > + [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National > + Semiconductor > + [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video > + Electronics Standards Association (VESA) > + > + Those devices have been marketed under the FPD-Link and FlatLink brand names > + among others. > + > +properties: > + compatible: > + description: | > + Any encoder or decoder compatible with this generic binding, but with > + additional properties not listed here, must define its own binding and > + list a device specific compatible first followed by the generic compatible > + items: > + - enum: You can drop 'items' when there's only 1. > + - lvds-encoder # for LVDS encoders > + - lvds-decoder # for LVDS decoders > + > + ports: > + type: object > + description: | > + This device has two video ports. Their connections are modeled using the > + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt > + properties: > + port@0: > + type: object > + description: | > + With LVDS encoders port 0 is for parallel input > + With LVDS decoders port 0 is for LVDS input > + > + port@1: > + type: object > + description: | > + With LVDS encoders port 1 is for LVDS output > + With LVDS decoders port 1 is for parallel output port@* are required, right? > + > +required: > + - compatible > + - ports > + > +examples: > + - | > + lvds-encoder { > + compatible = "lvds-encoder"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + lvds_enc_in: endpoint { > + remote-endpoint = <&display_out_rgb>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + lvds_enc_out: endpoint { > + remote-endpoint = <&lvds_panel_in>; > + }; > + }; > + }; > + }; > + > + - | > + lvds-decoder { > + compatible = "lvds-decoder"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + lvds_dec_in: endpoint { > + remote-endpoint = <&display_out_lvds>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + lvds_dec_out: endpoint { > + remote-endpoint = <&rgb_panel_in>; > + }; > + }; > + }; > + }; > + > +... _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
