Re: Overlay support in the i.MX7 display

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 03 Nov 2019 19:15:49 +0100
Stefan Agner <stefan@xxxxxxxx> wrote:

> Hi Laurent,
> 
> On 2019-11-01 09:43, Laurent Pinchart wrote:
> > Hello,
> > 
> > I'm looking at the available options to support overlays in the display
> > pipeline of the i.MX7. The LCDIF itself unfortunaltey doesn't support
> > overlays, the feature being implemented in the PXP. A driver for the PXP
> > is available but only supports older SoCs whose PXP doesn't support
> > overlays. This driver is implemented as a V4L2 mem2mem driver, which
> > makes support of additional input channels impossible.  
> 
> Thanks for bringing this up, it is a topic I have wondered too:
> Interaction between PXP and mxsfb.
> 
> I am not very familiar with the V4L2 subsystem so take my opinions with
> a grain of salt.
> 
> > 
> > Here are the options I can envision:
> > 
> > - Extend the existing PXP driver to support multiple channels. This is
> >   technically feasible, but will require moving away from the V4L2
> >   mem2mem framework, which would break userspace. I don't think this
> >   path could lead anywhere.
> > 
> > - Write a new PXP driver for the i.MX7, still using V4L2, but with
> >   multiple video nodes. This would allow blending multiple layers, but
> >   would require writing the output to memory, while the PXP has support
> >   for direct connections to the LCDIF (through small SRAM buffers).
> >   Performances would thus be suboptimal. The API would also be awkward,
> >   as using the PXP for display would require usage of V4L2 in
> >   applications.  
> 
> So the video nodes would be sinks? I would expect overlays to be usable
> through KMS, I guess that would then not work, correct?
> 
> > 
> > - Extend the mxsfb driver with PXP support, and expose the PXP inputs as
> >   KMS planes. The PXP would only be used when available, and would be
> >   transparent to applications. This would however prevent using it
> >   separately from the display (to perform multi-pass alpha blending for
> >   instance).  
> 
> KMS planes are well defined and are well integrated with the KMS API, so
> I prefer this option. But is this compatible with the currently
> supported video use-case? E.g. could we make PXP available through V4L2
> and through DRM/mxsfb?
> 
> Not sure what your use case is exactly, but when playing a video I
> wonder where is the higher value using PXP: Color conversion and scaling
> or compositing...? I would expect higher value in the former use case.

Hi,

mind, with Wayland architecture, color conversion and scaling could be
at the same level/step as compositing, in the display server instead of
an application. Hence if the PXP capabilities were advertised as KMS
planes, there should be nothing to patch in Wayland-designed
applications to make use of them, assuming the applications did not
already rely on V4L2 M2M devices.

Would it not be possible to expose PXP through both uAPI interfaces? At
least KMS atomic's TEST_ONLY feature would make it easy to say "no" to
userspace if another bit of userspace already reserved the device via
e.g. V4L2.


Thanks,
pq

Attachment: pgpensaDZptbo.pgp
Description: OpenPGP digital signature

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux