Tested it on my end and confirmed that it works as intended.
On Fri, Nov 1, 2019 at 9:26 AM Sean Paul <sean@xxxxxxxxxx> wrote:
>
> From: Sean Paul <seanpaul@xxxxxxxxxxxx>
>
> Expose the rotation property and handle REFLECT_Y rotations.
>
> Cc: Fritz Koenig <frkoenig@xxxxxxxxxxxx>
> Cc: Daniele Castagna <dcastagna@xxxxxxxxxxxx>
> Cc: Miguel Casas <mcasas@xxxxxxxxxxxx>
> Cc: Mark Yacoub <markyacoub@xxxxxxxxxx>
> Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
> ---
>
> The hardware also supports REFLECT_X, but I just could not figure out
> how to get it working. If someone is interested in getting this going,
> I'm happy to share notes and my WIP patch. For now, though, I actually
> only need y-flip so I'm giving up on x-flip.
>
>
> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 6 ++++++
> drivers/gpu/drm/mediatek/mtk_drm_plane.c | 11 ++++++++++-
> drivers/gpu/drm/mediatek/mtk_drm_plane.h | 1 +
> 3 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index 14878ebf59d7..6505479ee506 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -50,6 +50,7 @@
> OVL_CON_CLRFMT_RGB : 0)
> #define OVL_CON_AEN BIT(8)
> #define OVL_CON_ALPHA 0xff
> +#define OVL_CON_VIRT_FLIP BIT(9)
>
> struct mtk_disp_ovl_data {
> unsigned int addr;
> @@ -229,6 +230,11 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
> if (idx != 0)
> con |= OVL_CON_AEN | OVL_CON_ALPHA;
>
> + if (pending->rotation & DRM_MODE_REFLECT_Y) {
> + con |= OVL_CON_VIRT_FLIP;
> + addr += (pending->height - 1) * pending->pitch;
> + }
> +
> writel_relaxed(con, comp->regs + DISP_REG_OVL_CON(idx));
> writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
> writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> index 584a9ecadce6..4d8f2b55334b 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> @@ -88,6 +88,9 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
> if (!fb)
> return 0;
>
> + if (fb->format->is_yuv && (state->rotation & ~DRM_MODE_ROTATE_0) != 0)
> + return -EINVAL;
> +
> if (!state->crtc)
> return 0;
>
> @@ -132,6 +135,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
> state->pending.y = plane->state->dst.y1;
> state->pending.width = drm_rect_width(&plane->state->dst);
> state->pending.height = drm_rect_height(&plane->state->dst);
> + state->pending.rotation = plane->state->rotation;
> wmb(); /* Make sure the above parameters are set before update */
> state->pending.dirty = true;
> }
> @@ -166,7 +170,12 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
> return err;
> }
>
> - drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
> + err = drm_plane_create_rotation_property(plane, 0,
> + DRM_MODE_ROTATE_0 |
> + DRM_MODE_REFLECT_Y);
> + if (err)
> + DRM_INFO("Create rotation property failed, continuing...\n");
>
> + drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
> return 0;
> }
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> index 6f842df722c7..83b634a997cc 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> @@ -20,6 +20,7 @@ struct mtk_plane_pending_state {
> unsigned int y;
> unsigned int width;
> unsigned int height;
> + unsigned int rotation;
> bool dirty;
> };
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
