On Wed, Oct 30, 2019 at 03:49:30PM -0700, John Hubbard wrote:
> Document the new pin_user_pages() and related calls
> and behavior.
>
> Thanks to Jan Kara and Vlastimil Babka for explaining the 4 cases
> in this documentation. (I've reworded it and expanded on it slightly.)
As I said before I think this may be better in a previous patch where you
reference it.
Ira
>
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Signed-off-by: John Hubbard <jhubbard@xxxxxxxxxx>
> ---
> Documentation/vm/index.rst | 1 +
> Documentation/vm/pin_user_pages.rst | 213 ++++++++++++++++++++++++++++
> 2 files changed, 214 insertions(+)
> create mode 100644 Documentation/vm/pin_user_pages.rst
>
> diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst
> index e8d943b21cf9..7194efa3554a 100644
> --- a/Documentation/vm/index.rst
> +++ b/Documentation/vm/index.rst
> @@ -44,6 +44,7 @@ descriptions of data structures and algorithms.
> page_migration
> page_frags
> page_owner
> + pin_user_pages
> remap_file_pages
> slub
> split_page_table_lock
> diff --git a/Documentation/vm/pin_user_pages.rst b/Documentation/vm/pin_user_pages.rst
> new file mode 100644
> index 000000000000..7110bca3f188
> --- /dev/null
> +++ b/Documentation/vm/pin_user_pages.rst
> @@ -0,0 +1,213 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +====================================================
> +pin_user_pages() and related calls
> +====================================================
> +
> +.. contents:: :local:
> +
> +Overview
> +========
> +
> +This document describes the following functions: ::
> +
> + pin_user_pages
> + pin_user_pages_fast
> + pin_user_pages_remote
> +
> + pin_longterm_pages
> + pin_longterm_pages_fast
> + pin_longterm_pages_remote
> +
> +Basic description of FOLL_PIN
> +=============================
> +
> +A new flag for get_user_pages ("gup") has been added: FOLL_PIN. FOLL_PIN has
> +significant interactions and interdependencies with FOLL_LONGTERM, so both are
> +covered here.
> +
> +Both FOLL_PIN and FOLL_LONGTERM are "internal" to gup, meaning that neither
> +FOLL_PIN nor FOLL_LONGTERM should not appear at the gup call sites. This allows
> +the associated wrapper functions (pin_user_pages and others) to set the correct
> +combination of these flags, and to check for problems as well.
> +
> +FOLL_PIN and FOLL_GET are mutually exclusive for a given gup call. However,
> +multiple threads and call sites are free to pin the same struct pages, via both
> +FOLL_PIN and FOLL_GET. It's just the call site that needs to choose one or the
> +other, not the struct page(s).
> +
> +The FOLL_PIN implementation is nearly the same as FOLL_GET, except that FOLL_PIN
> +uses a different reference counting technique.
> +
> +FOLL_PIN is a prerequisite to FOLL_LONGTGERM. Another way of saying that is,
> +FOLL_LONGTERM is a specific case, more restrictive case of FOLL_PIN.
> +
> +Which flags are set by each wrapper
> +===================================
> +
> +Only FOLL_PIN and FOLL_LONGTERM are covered here. These flags are added to
> +whatever flags the caller provides::
> +
> + Function gup flags (FOLL_PIN or FOLL_LONGTERM only)
> + -------- ------------------------------------------
> + pin_user_pages FOLL_PIN
> + pin_user_pages_fast FOLL_PIN
> + pin_user_pages_remote FOLL_PIN
> +
> + pin_longterm_pages FOLL_PIN | FOLL_LONGTERM
> + pin_longterm_pages_fast FOLL_PIN | FOLL_LONGTERM
> + pin_longterm_pages_remote FOLL_PIN | FOLL_LONGTERM
> +
> +Tracking dma-pinned pages
> +=========================
> +
> +Some of the key design constraints, and solutions, for tracking dma-pinned
> +pages:
> +
> +* An actual reference count, per struct page, is required. This is because
> + multiple processes may pin and unpin a page.
> +
> +* False positives (reporting that a page is dma-pinned, when in fact it is not)
> + are acceptable, but false negatives are not.
> +
> +* struct page may not be increased in size for this, and all fields are already
> + used.
> +
> +* Given the above, we can overload the page->_refcount field by using, sort of,
> + the upper bits in that field for a dma-pinned count. "Sort of", means that,
> + rather than dividing page->_refcount into bit fields, we simple add a medium-
> + large value (GUP_PIN_COUNTING_BIAS, initially chosen to be 1024: 10 bits) to
> + page->_refcount. This provides fuzzy behavior: if a page has get_page() called
> + on it 1024 times, then it will appear to have a single dma-pinned count.
> + And again, that's acceptable.
> +
> +This also leads to limitations: there are only 32-10==22 bits available for a
> +counter that increments 10 bits at a time.
> +
> +TODO: for 1GB and larger huge pages, this is cutting it close. That's because
> +when pin_user_pages() follows such pages, it increments the head page by "1"
> +(where "1" used to mean "+1" for get_user_pages(), but now means "+1024" for
> +pin_user_pages()) for each tail page. So if you have a 1GB huge page:
> +
> +* There are 256K (18 bits) worth of 4 KB tail pages.
> +* There are 22 bits available to count up via GUP_PIN_COUNTING_BIAS (that is,
> + 10 bits at a time)
> +* There are 22 - 18 == 4 bits available to count. Except that there aren't,
> + because you need to allow for a few normal get_page() calls on the head page,
> + as well. Fortunately, the approach of using addition, rather than "hard"
> + bitfields, within page->_refcount, allows for sharing these bits gracefully.
> + But we're still looking at about 16 references.
> +
> +This, however, is a missing feature more than anything else, because it's easily
> +solved by addressing an obvious inefficiency in the original get_user_pages()
> +approach of retrieving pages: stop treating all the pages as if they were
> +PAGE_SIZE. Retrieve huge pages as huge pages. The callers need to be aware of
> +this, so some work is required. Once that's in place, this limitation mostly
> +disappears from view, because there will be ample refcounting range available.
> +
> +* Callers must specifically request "dma-pinned tracking of pages". In other
> + words, just calling get_user_pages() will not suffice; a new set of functions,
> + pin_user_page() and related, must be used.
> +
> +FOLL_PIN, FOLL_GET, FOLL_LONGTERM: when to use which flags
> +==========================================================
> +
> +Thanks to Jan Kara, Vlastimil Babka and several other -mm people, for describing
> +these categories:
> +
> +CASE 1: Direct IO (DIO)
> +-----------------------
> +There are GUP references to pages that are serving
> +as DIO buffers. These buffers are needed for a relatively short time (so they
> +are not "long term"). No special synchronization with page_mkclean() or
> +munmap() is provided. Therefore, flags to set at the call site are: ::
> +
> + FOLL_PIN
> +
> +...but rather than setting FOLL_PIN directly, call sites should use one of
> +the pin_user_pages*() routines that set FOLL_PIN.
> +
> +CASE 2: RDMA
> +------------
> +There are GUP references to pages that are serving as DMA
> +buffers. These buffers are needed for a long time ("long term"). No special
> +synchronization with page_mkclean() or munmap() is provided. Therefore, flags
> +to set at the call site are: ::
> +
> + FOLL_PIN | FOLL_LONGTERM
> +
> +TODO: There is also a special case when the pages are DAX pages: in addition to
> +the above flags, the caller needs something like a layout lease on the
> +associated file. This is yet to be implemented. When it is implemented, it's
> +expected that the lease will be a prerequisite to setting FOLL_LONGTERM.
For now we probably want to leave this note out until we figure out how this is
going to work. Best to say something like:
Some pages, such as DAX pages, can't be pinned with longterm pins and will
fail.
Ira
> +
> +CASE 3: ODP
> +-----------
> +(Mellanox/Infiniband On Demand Paging: the hardware supports
> +replayable page faulting). There are GUP references to pages serving as DMA
> +buffers. For ODP, MMU notifiers are used to synchronize with page_mkclean()
> +and munmap(). Therefore, normal GUP calls are sufficient, so neither flag
> +needs to be set.
> +
> +CASE 4: Pinning for struct page manipulation only
> +-------------------------------------------------
> +Here, normal GUP calls are sufficient, so neither flag needs to be set.
> +
> +page_dma_pinned(): the whole point of pinning
> +=============================================
> +
> +The whole point of marking pages as "DMA-pinned" or "gup-pinned" is to be able
> +to query, "is this page DMA-pinned?" That allows code such as page_mkclean()
> +(and file system writeback code in general) to make informed decisions about
> +what to do when a page cannot be unmapped due to such pins.
> +
> +What to do in those cases is the subject of a years-long series of discussions
> +and debates (see the References at the end of this document). It's a TODO item
> +here: fill in the details once that's worked out. Meanwhile, it's safe to say
> +that having this available: ::
> +
> + static inline bool page_dma_pinned(struct page *page)
> +
> +...is a prerequisite to solving the long-running gup+DMA problem.
> +
> +Another way of thinking about FOLL_GET, FOLL_PIN, and FOLL_LONGTERM
> +===================================================================
> +
> +Another way of thinking about these flags is as a progression of restrictions:
> +FOLL_GET is for struct page manipulation, without affecting the data that the
> +struct page refers to. FOLL_PIN is a *replacement* for FOLL_GET, and is for
> +short term pins on pages whose data *will* get accessed. As such, FOLL_PIN is
> +a "more severe" form of pinning. And finally, FOLL_LONGTERM is an even more
> +restrictive case that has FOLL_PIN as a prerequisite: this is for pages that
> +will be pinned longterm, and whose data will be accessed.
> +
> +Unit testing
> +============
> +This file::
> +
> + tools/testing/selftests/vm/gup_benchmark.c
> +
> +has the following new calls to exercise the new pin*() wrapper functions:
> +
> +* PIN_FAST_BENCHMARK (./gup_benchmark -a)
> +* PIN_LONGTERM_BENCHMARK (./gup_benchmark -a)
> +* PIN_BENCHMARK (./gup_benchmark -a)
> +
> +You can monitor how many total dma-pinned pages have been acquired and released
> +since the system was booted, via two new /proc/vmstat entries: ::
> +
> + /proc/vmstat/nr_foll_pin_requested
> + /proc/vmstat/nr_foll_pin_requested
> +
> +Those are both going to show zero, unless CONFIG_DEBUG_VM is set. This is
> +because there is a noticeable performance drop in put_user_page(), when they
> +are activated.
> +
> +References
> +==========
> +
> +* `Some slow progress on get_user_pages() (Apr 2, 2019) <https://lwn.net/Articles/784574/>`_
> +* `DMA and get_user_pages() (LPC: Dec 12, 2018) <https://lwn.net/Articles/774411/>`_
> +* `The trouble with get_user_pages() (Apr 30, 2018) <https://lwn.net/Articles/753027/>`_
> +
> +John Hubbard, October, 2019
> --
> 2.23.0
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
