[PATCH] drm/i915: Program LUT before intel_color_commit() if LUT was not previously set v2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commit 051a6d8d3ca0 ("drm/i915: Move LUT programming to happen after
vblank waits"), I am seeing an ugly colored flash of the first few display
lines on 2 Cherry Trail devices when the gamma table gets set for the first
time. A blue flash on a GPD win and a yellow flash on an Asus T100HA.

The problem is that since this change, the LUT is programmed after the
write *and latching* of the double-buffered register which causes the LUT
to be used starting at the next frame. This means that the old LUT is still
used for the first couple of lines of the display. If no LUT was in use
before then the LUT registers may contain bogus values. This leads to
messed up colors until the new LUT values are written. At least on CHT DSI
panels this causes messed up colors on the first few lines.

This commit fixes this by adding a load_lut_before_commit boolean,
modifying commit_pipe_config() to load the luts earlier if this is set.
and setting this from intel_color_check when enabling gamma (rather then
updating an existing gamma table).

Changes in v2:
-Simply check for setting load_lut_before_commit to:
 if (!old_crtc_state->gamma_enable && new_crtc_state->gamma_enable)

Fixes: 051a6d8d3ca0 ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_color.c         | 14 ++++++++++++++
 drivers/gpu/drm/i915/display/intel_display.c       |  6 +++++-
 drivers/gpu/drm/i915/display/intel_display_types.h |  3 +++
 3 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_color.c b/drivers/gpu/drm/i915/display/intel_color.c
index fa44eb73d088..954a232c15d1 100644
--- a/drivers/gpu/drm/i915/display/intel_color.c
+++ b/drivers/gpu/drm/i915/display/intel_color.c
@@ -1063,6 +1063,8 @@ intel_color_add_affected_planes(struct intel_crtc_state *new_crtc_state)
 		intel_atomic_get_old_crtc_state(state, crtc);
 	struct intel_plane *plane;
 
+	new_crtc_state->load_lut_before_commit = false;
+
 	if (!new_crtc_state->base.active ||
 	    drm_atomic_crtc_needs_modeset(&new_crtc_state->base))
 		return 0;
@@ -1071,6 +1073,18 @@ intel_color_add_affected_planes(struct intel_crtc_state *new_crtc_state)
 	    new_crtc_state->csc_enable == old_crtc_state->csc_enable)
 		return 0;
 
+	/*
+	 * Normally we load the LUTs after vblank / after the double-buffer
+	 * registers written by commit have been latched, this avoids a
+	 * gamma change mid-way the screen. This does mean that the first
+	 * few lines of the display will (sometimes) still use the old
+	 * table. This is fine when changing an existing LUT, but if this
+	 * is the first time the LUT gets loaded, then the hw may contain
+	 * random values, causing the first lines to have funky colors.
+	 */
+	if (!old_crtc_state->gamma_enable && new_crtc_state->gamma_enable)
+		new_crtc_state->load_lut_before_commit = true;
+
 	for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
 		struct intel_plane_state *plane_state;
 
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index cbf9cf30050c..6b1dc5a5aeb1 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -14168,8 +14168,11 @@ static void commit_pipe_config(struct intel_atomic_state *state,
 	 */
 	if (!modeset) {
 		if (new_crtc_state->base.color_mgmt_changed ||
-		    new_crtc_state->update_pipe)
+		    new_crtc_state->update_pipe) {
+			if (new_crtc_state->load_lut_before_commit)
+				intel_color_load_luts(new_crtc_state);
 			intel_color_commit(new_crtc_state);
+		}
 
 		if (INTEL_GEN(dev_priv) >= 9)
 			skl_detach_scalers(new_crtc_state);
@@ -14717,6 +14720,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
 		if (new_crtc_state->base.active &&
 		    !needs_modeset(new_crtc_state) &&
+		    !new_crtc_state->load_lut_before_commit &&
 		    (new_crtc_state->base.color_mgmt_changed ||
 		     new_crtc_state->update_pipe))
 			intel_color_load_luts(new_crtc_state);
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 40184e823c84..6bcc997b7ecb 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -990,6 +990,9 @@ struct intel_crtc_state {
 	/* enable pipe csc? */
 	bool csc_enable;
 
+	/* load luts before color settings commit */
+	bool load_lut_before_commit;
+
 	/* Display Stream compression state */
 	struct {
 		bool compression_enable;
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux