On Wed, Oct 23, 2019 at 05:45:08PM +0200, Boris Brezillon wrote: > Add the data-mapping property to describe the output bus format and > the bus-width property to describe the input bus format. > > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> > --- > Changes in v3: > * New patch > --- > .../bindings/display/bridge/lvds-transmitter.txt | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt > index 60091db5dfa5..7b43b6f20279 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt > @@ -36,6 +36,19 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt. > - Video port 0 for parallel input > - Video port 1 for LVDS output > > +Optional port 0 node properties: > + > +- bus-width: number of data lines use to transmit the RGB data. > + Can be 18 or 24. > + > +Optional port 1 node properties: > + > +- data-mapping: see Documentation/devicetree/bindings/display/panel/lvds.yaml > + for more details about this LVDS data-mapping property. > + Supported values: > + "jeida-18" > + "jeida-24" > + "vesa-24" This is already defined to be a panel property. Do we need it at both ends? Also, why duplicate all the supported values. Rob _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
