On Tue, Oct 22, 2019 at 03:29:44PM +0530, Shashank Sharma wrote: > This patch adds a scaling filter mode porperty > to allow: > - A driver/HW to showcase it's scaling filter capabilities. > - A userspace to pick a desired effect while scaling. > > This option will be particularly useful in the scenarios where > Integer mode scaling is possible, and a UI client wants to pick > filters like Nearest-neighbor applied for non-blurry outputs. > > There was a RFC patch series published, to discus the request to enable > Integer mode scaling by some of the gaming communities, which can be > found here: > https://patchwork.freedesktop.org/series/66175/ > > Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx> > --- > drivers/gpu/drm/drm_atomic_uapi.c | 4 ++++ > include/drm/drm_crtc.h | 26 ++++++++++++++++++++++++++ > include/drm/drm_mode_config.h | 6 ++++++ > 3 files changed, 36 insertions(+) > > diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c > index 0d466d3b0809..883329453a86 100644 > --- a/drivers/gpu/drm/drm_atomic_uapi.c > +++ b/drivers/gpu/drm/drm_atomic_uapi.c > @@ -435,6 +435,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc, > return ret; > } else if (property == config->prop_vrr_enabled) { > state->vrr_enabled = val; > + } else if (property == config->scaling_filter_property) { > + state->scaling_filter = val; > } else if (property == config->degamma_lut_property) { > ret = drm_atomic_replace_property_blob_from_id(dev, > &state->degamma_lut, > @@ -503,6 +505,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc, > *val = (state->gamma_lut) ? state->gamma_lut->base.id : 0; > else if (property == config->prop_out_fence_ptr) > *val = 0; > + else if (property == config->scaling_filter_property) > + *val = state->scaling_filter; > else if (crtc->funcs->atomic_get_property) > return crtc->funcs->atomic_get_property(crtc, state, property, val); > else > diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h > index 5e9b15a0e8c5..94c5509474a8 100644 > --- a/include/drm/drm_crtc.h > +++ b/include/drm/drm_crtc.h > @@ -58,6 +58,25 @@ struct device_node; > struct dma_fence; > struct edid; > > +enum drm_scaling_filters { > + DRM_SCALING_FILTER_DEFAULT, > + DRM_SCALING_FILTER_MEDIUM, > + DRM_SCALING_FILTER_BILINEAR, > + DRM_SCALING_FILTER_NN, > + DRM_SCALING_FILTER_NN_IS_ONLY, > + DRM_SCALING_FILTER_EDGE_ENHANCE, > + DRM_SCALING_FILTER_INVALID, > +}; > + > +static const struct drm_prop_enum_list drm_scaling_filter_enum_list[] = { > + { DRM_SCALING_FILTER_DEFAULT, "Default" }, > + { DRM_SCALING_FILTER_MEDIUM, "Medium" }, > + { DRM_SCALING_FILTER_BILINEAR, "Bilinear" }, > + { DRM_SCALING_FILTER_NN, "Nearest Neighbor" }, > + { DRM_SCALING_FILTER_NN_IS_ONLY, "Integer Mode Scaling" }, > + { DRM_SCALING_FILTER_INVALID, "Invalid" }, > +}; > + > static inline int64_t U642I64(uint64_t val) > { > return (int64_t)*((int64_t *)&val); > @@ -283,6 +302,13 @@ struct drm_crtc_state { > */ > u32 target_vblank; > > + /** > + * @scaling_filter: > + * > + * Scaling filter mode to be applied > + */ > + u32 scaling_filter; > + > /** > * @async_flip: > * > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h > index 3bcbe30339f0..efd6fd55770f 100644 > --- a/include/drm/drm_mode_config.h > +++ b/include/drm/drm_mode_config.h > @@ -914,6 +914,12 @@ struct drm_mode_config { > */ > struct drm_property *modifiers_property; > > + /** > + * @scaling_filter_property: CRTC property to apply a particular filter > + * while scaling in panel fitter mode. > + */ > + struct drm_property *scaling_filter_property; This needs to per-crtc/plane. > + > /* cursor size */ > uint32_t cursor_width, cursor_height; > > -- > 2.17.1 -- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
