On 10/17/19 9:03 AM, Hans Verkuil wrote:
> On 10/16/19 6:14 PM, Russell King - ARM Linux admin wrote:
>> On Wed, Oct 16, 2019 at 03:39:15PM +0200, Hans Verkuil wrote:
>>> From: Dariusz Marcinkiewicz <darekm@xxxxxxxxxx>
>>>
>>> Use the new cec_notifier_conn_(un)register() functions to
>>> (un)register the notifier for the HDMI connector.
>>>
>>> Signed-off-by: Dariusz Marcinkiewicz <darekm@xxxxxxxxxx>
>>> Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
>>
>> Please explain in detail what this mutex actually achieves.
>
> Dariusz, since you're the author, can you reply to Russell?
>
> If this is going to be a delaying factor, then I'll post a new version
> without the mutex that just replaces the cec_notifier API.
I decided to post a v9, moving the mutex to the second patch, which should
make the first patch acceptable to everyone for v5.5.
Regards,
Hans
>
> Regards,
>
> Hans
>
>>
>>> ---
>>> drivers/gpu/drm/i2c/tda998x_drv.c | 21 ++++++++++++++++-----
>>> 1 file changed, 16 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
>>> index 84c6d4c91c65..8262b44b776e 100644
>>> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
>>> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
>>> @@ -82,6 +82,9 @@ struct tda998x_priv {
>>> u8 audio_port_enable[AUDIO_ROUTE_NUM];
>>> struct tda9950_glue cec_glue;
>>> struct gpio_desc *calib;
>>> +
>>> + /* protect cec_notify */
>>> + struct mutex cec_notify_mutex;
>>> struct cec_notifier *cec_notify;
>>> };
>>>
>>> @@ -805,8 +808,11 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
>>> tda998x_edid_delay_start(priv);
>>> } else {
>>> schedule_work(&priv->detect_work);
>>> - cec_notifier_set_phys_addr(priv->cec_notify,
>>> - CEC_PHYS_ADDR_INVALID);
>>> +
>>> + mutex_lock(&priv->cec_notify_mutex);
>>> + cec_notifier_phys_addr_invalidate(
>>> + priv->cec_notify);
>>> + mutex_unlock(&priv->cec_notify_mutex);
>>> }
>>>
>>> handled = true;
>>> @@ -1790,8 +1796,10 @@ static void tda998x_destroy(struct device *dev)
>>>
>>> i2c_unregister_device(priv->cec);
>>>
>>> - if (priv->cec_notify)
>>> - cec_notifier_put(priv->cec_notify);
>>> + mutex_lock(&priv->cec_notify_mutex);
>>> + cec_notifier_conn_unregister(priv->cec_notify);
>>> + priv->cec_notify = NULL;
>>> + mutex_unlock(&priv->cec_notify_mutex);
>>
>> By the time we get here:
>>
>> 1) The interrupt has been freed (which is a synchronous operation)
>> tda998x_irq_thread() can't be called and can't be running, and
>> therefore cec_notifier_phys_addr_invalidate() also can't be called
>> or be running.
>> 2) You don't touch the cec_notifier_set_phys_addr_from_edid() site;
>> if there's any case that _might_ possibly conflict, it is that one.
>> 3) tda998x_destroy() and tda998x_create() can't be called concurrently
>> in any case; the driver model guarantees that ->probe and ->remove
>> for the same device are serialised.
>>
>>> }
>>>
>>> static int tda998x_create(struct device *dev)
>>> @@ -1812,6 +1820,7 @@ static int tda998x_create(struct device *dev)
>>> mutex_init(&priv->mutex); /* protect the page access */
>>> mutex_init(&priv->audio_mutex); /* protect access from audio thread */
>>> mutex_init(&priv->edid_mutex);
>>> + mutex_init(&priv->cec_notify_mutex);
>>> INIT_LIST_HEAD(&priv->bridge.list);
>>> init_waitqueue_head(&priv->edid_delay_waitq);
>>> timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
>>> @@ -1916,7 +1925,9 @@ static int tda998x_create(struct device *dev)
>>> cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
>>> }
>>>
>>> - priv->cec_notify = cec_notifier_get(dev);
>>> + mutex_lock(&priv->cec_notify_mutex);
>>> + priv->cec_notify = cec_notifier_conn_register(dev, NULL, NULL);
>>> + mutex_unlock(&priv->cec_notify_mutex);
>>
>> and:
>>
>> 4) priv->cec_notify will be NULL here until such time that
>> cec_notifier_conn_register() has returned. If the mutex is trying
>> to protect something, it's very unclear what it is.
>>
>> Trying to guess what it's protecting against:
>>
>> - Is it protecting against NULL priv->cec_notify? No, because it can
>> be NULL just before we take the lock.
>> - Is it protecting the internals of cec_notifier_conn_register()
>> against the other calls - no, because priv->cec_notify will be NULL
>> until the function has finished.
>> - Is it protecting the write to priv->cec_notify? Maybe, but that
>> doesn't need any protection - architectures are single-copy atomic,
>> which means that a pointer is either written or it is not written.
>> Therefore, it will either be NULL (the state before the call is made)
>> or it will be set correctly (after the call has completed.)
>>
>> So, all in all, I don't see what this lock is doing, and I think it
>> should be removed.
>>
>> If it's necessary for a future change (which may or may not be merged)
>> then the lock should be part of that future change, because the change
>> proposed by this patch certainly does not need it.
>>
>> Thanks.
>>
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
