This adds a starting point for processing and defining generic bindings used by DSI panels. We just define one single bool property to force the panel into video mode for now. Cc: devicetree@xxxxxxxxxxxxxxx Suggested-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- ChangeLog v2->v3: - Make a more complete DSI panel binding including the controller and its address-cells and size-cells and a pattern for the panel nodes. The panel is one per DSI master, the reg property is compulsory but should always be 0 (as far as I can tell) as only one panel can be connected. The bus doesn't really have any addresses for the panel, the address/reg notation seems to be cargo-culted from the port graphs and is not necessary to parse some device trees, it is used to tell whether the node is a panel or not rather than any addressing. - I have no idea how many displays you can daisychain on a single DSI master, I just guess 15 will be enough. The MIPI-specs are memberwalled. Someone who knows can tell perhaps? ChangeLog v1->v2: - New patch after feedback. --- .../display/panel/panel-dsi-common.yaml | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-common.yaml diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-common.yaml new file mode 100644 index 000000000000..d63f597eff9c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-common.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-dsi-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for DSI Display Panels + +maintainers: + - Linus Walleij <linus.walleij@xxxxxxxxxx> + +description: | + This document defines device tree properties common to DSI, Display + Serial Interface panels. It doesn't constitute a device tree binding + specification by itself but is meant to be referenced by device tree + bindings. + + When referenced from panel device tree bindings the properties defined in + this document are defined as follows. The panel device tree bindings are + responsible for defining whether each property is required or optional. + + Notice: this binding concerns DSI panels connected directly to a master + without any intermediate port graph to the panel. Each DSI master + can control exactly one panel. They should all just have a node "panel" + for their panel with their reg-property set to 0. + +properties: + $nodename: + pattern: "^dsi-controller(@[0-9a-f]+)?$" + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^panel$": + type: object + + properties: + reg: + const: 0 + description: + Only one panel can be connected to each DSI controller, but for + historical reasons, the reg property must be specified, as the + DSI controller can contain other child nodes, and operating + systems will identify which child node is the panel by looking + for the reg property. It should however always be set to 0. + + enforce-video-mode: + type: boolean + description: + The best option is usually to run a panel in command mode, as this + gives better control over the panel hardware. However for different + reasons like broken hardware, missing features or testing, it may be + useful to be able to force a command mode-capable panel into video + mode. -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
