Hi Jacopo,
Thank you for the patch.
On Tue, Oct 15, 2019 at 03:37:52PM +0200, Jacopo Mondi wrote:
> On Tue, Oct 15, 2019 at 02:15:35PM +0100, Kieran Bingham wrote:
> > On 15/10/2019 11:46, Jacopo Mondi wrote:
> > > Implement CMM handling in the crtc begin and enable atomic callbacks,
> > > and enable CMM unit through the Display Extensional Functions
> >
> > Extensional ?
> >
> > Perhaps this should just be Display Extension Functions?
> > Wow - that's actually what they call it in the data-sheet.
> >
> > > register at group setup time.
> >
> > Only a trivial extra blank line below that I can find... so
> >
> > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
> >
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 79 +++++++++++++++++++++++++
> > > drivers/gpu/drm/rcar-du/rcar_du_group.c | 5 ++
> > > drivers/gpu/drm/rcar-du/rcar_du_regs.h | 5 ++
> > > 3 files changed, 89 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > > index 23f1d6cc1719..4bc50a3f4a00 100644
> > > --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > > +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> > > @@ -21,6 +21,7 @@
> > > #include <drm/drm_plane_helper.h>
> > > #include <drm/drm_vblank.h>
> > >
> > > +#include "rcar_cmm.h"
> > > #include "rcar_du_crtc.h"
> > > #include "rcar_du_drv.h"
> > > #include "rcar_du_encoder.h"
> > > @@ -474,6 +475,70 @@ static void rcar_du_crtc_wait_page_flip(struct rcar_du_crtc *rcrtc)
> > > rcar_du_crtc_finish_page_flip(rcrtc);
> > > }
> > >
> > > +/* -----------------------------------------------------------------------------
> > > + * Color Management Module (CMM)
> > > + */
Missing blank line.
> > > +static int rcar_du_cmm_enable(struct drm_crtc *crtc)
> > > +{
> > > + struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> > > +
> > > + if (!rcrtc->cmm)
> > > + return 0;
> > > +
> > > + return rcar_cmm_enable(rcrtc->cmm);
> > > +}
> > > +
> > > +static void rcar_du_cmm_disable(struct drm_crtc *crtc)
> > > +{
> > > + struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> > > +
> > > + if (!rcrtc->cmm)
> > > + return;
> > > +
> > > + rcar_cmm_disable(rcrtc->cmm);
> > > +}
I think I would have inlined those two functions in their only call site
as
if (rcrtc->cmm)
rcar_cmm_enable(rcrtc->cmm);
but that's up to you.
> > > +
> > > +static int rcar_du_cmm_check(struct drm_crtc *crtc,
> > > + struct drm_crtc_state *state)
> > > +{
> > > + struct drm_property_blob *drm_lut = state->gamma_lut;
> > > + struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> > > + struct device *dev = rcrtc->dev->dev;
> > > +
> > > + if (!rcrtc->cmm || !drm_lut)
> > > + return 0;
> > > +
> > > + /* We only accept fully populated LUT tables. */
> > > + if (CM2_LUT_SIZE * sizeof(struct drm_color_lut) !=
> > > + drm_lut->length) {
How about
if (drm_color_lut_size(drm_lut) != CM2_LUT_SIZE)
?
> > > + dev_err(dev, "invalid gamma lut size: %lu bytes\n",
> > > + drm_lut->length);
> > > + return -EINVAL;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void rcar_du_cmm_setup(struct drm_crtc *crtc)
> > > +{
> > > + struct drm_property_blob *drm_lut = crtc->state->gamma_lut;
> > > + struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> > > + struct rcar_cmm_config cmm_config = {};
> > > +
> > > + if (!rcrtc->cmm)
> > > + return;
> > > +
> > > + if (drm_lut) {
> > > + cmm_config.lut.enable = true;
> > > + cmm_config.lut.table = (struct drm_color_lut *)drm_lut->data;
> > > +
> > > + } else {
> > > + cmm_config.lut.enable = false;
> > > + }
This could be changed to
if (drm_lut)
cmm_config.lut.table = (struct drm_color_lut *)drm_lut->data;
if we dropped the enable field.
> > > +
> > > + rcar_cmm_setup(rcrtc->cmm, &cmm_config);
> > > +}
> > > +
> > > /* -----------------------------------------------------------------------------
> > > * Start/Stop and Suspend/Resume
> > > */
> > > @@ -619,6 +684,8 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
> > > if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
> > > rcar_du_vsp_disable(rcrtc);
> > >
> > > + rcar_du_cmm_disable(crtc);
> > > +
> > > /*
> > > * Select switch sync mode. This stops display operation and configures
> > > * the HSYNC and VSYNC signals as inputs.
> > > @@ -631,6 +698,7 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc)
> > > DSYSR_TVM_SWITCH);
> > >
> > > rcar_du_group_start_stop(rcrtc->group, false);
> > > +
> >
> > Extra blank line...
>
> Thanks for spotting this. I'm quite sure I run checkpatch (I just
> re-did) and not warnings for the extra white space in the previous
> patch, or this extra blank line o_0
>
> > > }
> > >
> > > /* -----------------------------------------------------------------------------
> > > @@ -642,6 +710,11 @@ static int rcar_du_crtc_atomic_check(struct drm_crtc *crtc,
> > > {
> > > struct rcar_du_crtc_state *rstate = to_rcar_crtc_state(state);
> > > struct drm_encoder *encoder;
> > > + int ret;
> > > +
> > > + ret = rcar_du_cmm_check(crtc, state);
> > > + if (ret)
> > > + return ret;
> > >
> > > /* Store the routes from the CRTC output to the DU outputs. */
> > > rstate->outputs = 0;
> > > @@ -667,6 +740,7 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
> > > struct rcar_du_crtc_state *rstate = to_rcar_crtc_state(crtc->state);
> > > struct rcar_du_device *rcdu = rcrtc->dev;
> > >
> > > + rcar_du_cmm_enable(crtc);
> > > rcar_du_crtc_get(rcrtc);
> > >
> > > /*
> > > @@ -686,6 +760,7 @@ static void rcar_du_crtc_atomic_enable(struct drm_crtc *crtc,
> > > }
> > >
> > > rcar_du_crtc_start(rcrtc);
> > > + rcar_du_cmm_setup(crtc);
This is the only part that really bothers me, we setup the LUT after
starting the CRTC, so the first frame will be output with a disabled
LUT, or possibly even with the LUT enabled in the middle of the frame.
Do I recall correctly that moving setup before start causes issues ?
Could you explain what happens ?
> > > }
> > >
> > > static void rcar_du_crtc_atomic_disable(struct drm_crtc *crtc,
> > > @@ -739,6 +814,10 @@ static void rcar_du_crtc_atomic_begin(struct drm_crtc *crtc,
> > > */
> > > rcar_du_crtc_get(rcrtc);
> > >
> > > + /* If the active state changed, we let .atomic_enable handle CMM. */
> > > + if (crtc->state->color_mgmt_changed && !crtc->state->active_changed)
> > > + rcar_du_cmm_setup(crtc);
> >
> > Aha, this is quite neat for handling the timings.
>
> Yes, much more streamlined than what we had. Thanks Sean and Ezequiel :)
Yes, it guarantees that the CRTC is enabled, so we should be safe with
the assumption from patch 3/8 that rcar_du_cmm_setup() is always called
with the CMM enabled.
Interestingly though, this doesn't implement atomicity. That will be a
very interesting challenge. We should use double buffering of the LUT in
the CMM to avoid it being modified in the middle of the frame, but how
to update it in sync with the commit, and thus the VSP, remains to be
researched.
Could you maybe add a TODO comment in patch 3/8 to mention that we
should use double buffering ?
> > > +
> > > if (rcar_du_has(rcrtc->dev, RCAR_DU_FEATURE_VSP1_SOURCE))
> > > rcar_du_vsp_atomic_begin(rcrtc);
> > > }
> > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> > > index 9eee47969e77..583de800a66d 100644
> > > --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> > > +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> > > @@ -135,6 +135,7 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
> > > static void rcar_du_group_setup(struct rcar_du_group *rgrp)
> > > {
> > > struct rcar_du_device *rcdu = rgrp->dev;
> > > + u32 defr7 = DEFR7_CODE;
> > >
> > > /* Enable extended features */
> > > rcar_du_group_write(rgrp, DEFR, DEFR_CODE | DEFR_DEFE);
> > > @@ -147,6 +148,10 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
> > >
> > > rcar_du_group_setup_pins(rgrp);
> > >
Could you please add a comment here to mention that we shouldn't route
through CMM if no color management feature is used ?
/*
* TODO: Handling routing the DU output to CMM dynamically, as we should
* bypass CMM completely when no color management feature is used.
*/
> > > + defr7 |= (rgrp->cmms_mask & BIT(1) ? DEFR7_CMME1 : 0) |
> > > + (rgrp->cmms_mask & BIT(0) ? DEFR7_CMME0 : 0);
> > > + rcar_du_group_write(rgrp, DEFR7, defr7);
> > > +
> > > if (rcdu->info->gen >= 2) {
> > > rcar_du_group_setup_defr8(rgrp);
> > > rcar_du_group_setup_didsr(rgrp);
> > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> > > index bc87f080b170..fb9964949368 100644
> > > --- a/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> > > +++ b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> > > @@ -197,6 +197,11 @@
> > > #define DEFR6_MLOS1 (1 << 2)
> > > #define DEFR6_DEFAULT (DEFR6_CODE | DEFR6_TCNE1)
> > >
> > > +#define DEFR7 0x000ec
> > > +#define DEFR7_CODE (0x7779 << 16)
> > > +#define DEFR7_CMME1 BIT(6)
> > > +#define DEFR7_CMME0 BIT(4)
> > > +
> > > /* -----------------------------------------------------------------------------
> > > * R8A7790-only Control Registers
> > > */
> > >
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
