Re: [PATCH v5 3/8] drm: rcar-du: Add support for CMM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

Thank you for the patch.

On Tue, Oct 15, 2019 at 12:46:16PM +0200, Jacopo Mondi wrote:
> Add a driver for the R-Car Display Unit Color Correction Module.
> 
> In most of Gen3 SoCs, each DU output channel is provided with a CMM unit
> to perform image enhancement and color correction.
> 
> Add support for CMM through a driver that supports configuration of
> the 1-dimensional LUT table. More advanced CMM features will be
> implemented on top of this initial one.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/rcar-du/Kconfig    |   7 +
>  drivers/gpu/drm/rcar-du/Makefile   |   1 +
>  drivers/gpu/drm/rcar-du/rcar_cmm.c | 198 +++++++++++++++++++++++++++++
>  drivers/gpu/drm/rcar-du/rcar_cmm.h |  60 +++++++++
>  4 files changed, 266 insertions(+)
>  create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.c
>  create mode 100644 drivers/gpu/drm/rcar-du/rcar_cmm.h
> 
> diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
> index 1529849e217e..539d232790d1 100644
> --- a/drivers/gpu/drm/rcar-du/Kconfig
> +++ b/drivers/gpu/drm/rcar-du/Kconfig
> @@ -13,6 +13,13 @@ config DRM_RCAR_DU
>  	  Choose this option if you have an R-Car chipset.
>  	  If M is selected the module will be called rcar-du-drm.
>  
> +config DRM_RCAR_CMM
> +	bool "R-Car DU Color Management Module (CMM) Support"
> +	depends on DRM && OF
> +	depends on DRM_RCAR_DU
> +	help
> +	  Enable support for R-Car Color Management Module (CMM).
> +
>  config DRM_RCAR_DW_HDMI
>  	tristate "R-Car DU Gen3 HDMI Encoder Support"
>  	depends on DRM && OF
> diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
> index 6c2ed9c46467..4d1187ccc3e5 100644
> --- a/drivers/gpu/drm/rcar-du/Makefile
> +++ b/drivers/gpu/drm/rcar-du/Makefile
> @@ -15,6 +15,7 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_of.o \
>  rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
>  rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
>  
> +obj-$(CONFIG_DRM_RCAR_CMM)		+= rcar_cmm.o
>  obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
>  obj-$(CONFIG_DRM_RCAR_DW_HDMI)		+= rcar_dw_hdmi.o
>  obj-$(CONFIG_DRM_RCAR_LVDS)		+= rcar_lvds.o
> diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.c b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> new file mode 100644
> index 000000000000..9675a8587dee
> --- /dev/null
> +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.c
> @@ -0,0 +1,198 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * rcar_cmm.c -- R-Car Display Unit Color Management Module
> + *
> + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> + */
> +
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#include <drm/drm_color_mgmt.h>
> +
> +#include "rcar_cmm.h"
> +
> +#define CM2_LUT_CTRL		0x0000
> +#define CM2_LUT_CTRL_LUT_EN	BIT(0)
> +#define CM2_LUT_TBL_BASE	0x0600
> +#define CM2_LUT_TBL(__i)	(CM2_LUT_TBL_BASE + (__i) * 4)
> +
> +struct rcar_cmm {
> +	void __iomem *base;
> +
> +	/*
> +	 * @lut:		1D-LUT status

s/status/state/ ?

> +	 * @lut.enabled:	1D-LUT enabled flag
> +	 */
> +	struct {
> +		bool enabled;
> +	} lut;
> +};
> +
> +static inline int rcar_cmm_read(struct rcar_cmm *rcmm, u32 reg)
> +{
> +	return ioread32(rcmm->base + reg);
> +}
> +
> +static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data)
> +{
> +	iowrite32(data, rcmm->base + reg);
> +}
> +
> +/*
> + * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision
> + *			  and write to the CMM registers.

Some of you brief descriptions end with a period, some don't. I don't
have a preference, but could you please pick one option and use it
consistently ?

> + * @rcmm: Pointer to the CMM device
> + * @drm_lut: Pointer to the DRM LUT table
> + */
> +static void rcar_cmm_lut_write(struct rcar_cmm *rcmm,
> +			       const struct drm_color_lut *drm_lut)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < CM2_LUT_SIZE; ++i) {
> +		u32 entry =  drm_color_lut_extract(drm_lut[i].red, 8) << 16

As reported by Kieran, s/=  /= /

> +			  | drm_color_lut_extract(drm_lut[i].green, 8) << 8
> +			  | drm_color_lut_extract(drm_lut[i].blue, 8);
> +
> +		rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry);
> +	}
> +}
> +
> +/*
> + * rcar_cmm_setup() - Configure the CMM unit.
> + * @pdev: The platform device associated with the CMM instance
> + * @config: The CMM unit configuration
> + *
> + * Configure the CMM unit with the given configuration. Currently enabling,
> + * disabling and programming of the 1-D LUT unit is supported.
> + */
> +int rcar_cmm_setup(struct platform_device *pdev,
> +		   const struct rcar_cmm_config *config)
> +{
> +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> +
> +	/* Disable LUT if requested. */
> +	if (!config->lut.enable) {
> +		if (rcmm->lut.enabled) {
> +			rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> +			rcmm->lut.enabled = false;
> +		}
> +
> +		return 0;
> +	}
> +
> +	/* Enable LUT and program the new gamma table values. */
> +	if (!rcmm->lut.enabled) {
> +		rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
> +		rcmm->lut.enabled = true;
> +	}
> +
> +	rcar_cmm_lut_write(rcmm, config->lut.table);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(rcar_cmm_setup);
> +
> +/*
> + * rcar_cmm_enable() - Enable the CMM unit.
> + * @pdev: The platform device associated with the CMM instance
> + *
> + * Enable the CMM unit by enabling the parent clock.

It would be better to explain how the function should be used rather
than what it does internally.

 * Enable the CMM unit. When the output of the corresponding DU channel is
 * routed to the CMM unit, the unit shall be enabled before the DU channel is
 * started, and remain enabled until the channel is stopped. The CMM unit shall
 * the be disabled with rcar_cmm_disable().
 *
 * Calls to rcar_cmm_enable() and rcar_cmm_disable() are not reference-counted.
 * It is an error to attempt to enable an already enabled CMM unit, or to
 * attempt to disable a disabled unit.

The relationship with rcar_cmm_setup() should also be documented.
Looking at the code, I believe rcar_cmm_enable() has to be called first,
otherwise the CMM MSTP will be disabled, and registers can't be
accessed. I would document this as part of the rcar_cmm_setup()
function.

> + */
> +int rcar_cmm_enable(struct platform_device *pdev)
> +{
> +	int ret;
> +
> +	ret = pm_runtime_get_sync(&pdev->dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(rcar_cmm_enable);
> +
> +/*
> + * rcar_cmm_disable() - Disable the CMM unit.
> + * @pdev: The platform device associated with the CMM instance
> + *
> + * Disable the CMM unit by stopping the parent clock.

Same here, but you can simply reference rcar_cmm_enable().

 * Disable the CMM unit. See rcar_cmm_enable() for usage information.
 *
 * Disabling the CMM unit disable all the internal processing blocks. The CMM
 * state shall thus be restored with rcar_cmm_setup() when re-enabling the CMM
 * unit after the next rcar_cmm_enable() call.

> + */
> +void rcar_cmm_disable(struct platform_device *pdev)
> +{
> +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> +
> +	rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
> +	rcmm->lut.enabled = false;
> +
> +	pm_runtime_put(&pdev->dev);
> +}
> +EXPORT_SYMBOL_GPL(rcar_cmm_disable);
> +
> +/*
> + * rcar_cmm_init() - Initialize the CMM
> + * @pdev: The platform device associated with the CMM instance
> + *
> + * Return: 0 on success, -EPROBE_DEFER if the CMM is not available yet,
> + *         -ENODEV if the DRM_RCAR_CMM config option is disabled
> + */
> +int rcar_cmm_init(struct platform_device *pdev)
> +{
> +	struct rcar_cmm *rcmm = platform_get_drvdata(pdev);
> +
> +	if (!rcmm)
> +		return -EPROBE_DEFER;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(rcar_cmm_init);
> +
> +static int rcar_cmm_probe(struct platform_device *pdev)
> +{
> +	struct rcar_cmm *rcmm;
> +
> +	rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL);
> +	if (!rcmm)
> +		return -ENOMEM;
> +	platform_set_drvdata(pdev, rcmm);
> +
> +	rcmm->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(rcmm->base))
> +		return PTR_ERR(rcmm->base);
> +
> +	pm_runtime_enable(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static int rcar_cmm_remove(struct platform_device *pdev)
> +{
> +	pm_runtime_disable(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id rcar_cmm_of_table[] = {
> +	{ .compatible = "renesas,rcar-gen3-cmm", },
> +	{ .compatible = "renesas,rcar-gen2-cmm", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, rcar_cmm_of_table);
> +
> +static struct platform_driver rcar_cmm_platform_driver = {
> +	.probe		= rcar_cmm_probe,
> +	.remove		= rcar_cmm_remove,
> +	.driver		= {
> +		.name	= "rcar-cmm",
> +		.of_match_table = rcar_cmm_of_table,
> +	},
> +};
> +
> +module_platform_driver(rcar_cmm_platform_driver);
> +
> +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Renesas R-Car CMM Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/rcar-du/rcar_cmm.h b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> new file mode 100644
> index 000000000000..358ec03cf48a
> --- /dev/null
> +++ b/drivers/gpu/drm/rcar-du/rcar_cmm.h
> @@ -0,0 +1,60 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * rcar_cmm.h -- R-Car Display Unit Color Management Module
> + *
> + * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> + */
> +
> +#ifndef __RCAR_CMM_H__
> +#define __RCAR_CMM_H__
> +
> +#define CM2_LUT_SIZE		256
> +
> +struct drm_color_lut;
> +struct platform_device;
> +
> +/**
> + * struct rcar_cmm_config - CMM configuration
> + *
> + * @lut:	1D-LUT configuration
> + * @lut.enable:	1D-LUT enable flag
> + * @lut.table:	1D-LUT table entries
> + */
> +struct rcar_cmm_config {
> +	struct {
> +		bool enable;
> +		struct drm_color_lut *table;

As enable == true implies table != NULL, and enable == false implies
table == NULL, could we drop the enable field ?

With those small issues addressed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> +	} lut;
> +};
> +
> +#if IS_ENABLED(CONFIG_DRM_RCAR_CMM)
> +int rcar_cmm_init(struct platform_device *pdev);
> +
> +int rcar_cmm_enable(struct platform_device *pdev);
> +void rcar_cmm_disable(struct platform_device *pdev);
> +
> +int rcar_cmm_setup(struct platform_device *pdev,
> +		   const struct rcar_cmm_config *config);
> +#else
> +static inline int rcar_cmm_init(struct platform_device *pdev)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int rcar_cmm_enable(struct platform_device *pdev)
> +{
> +	return 0;
> +}
> +
> +static inline void rcar_cmm_disable(struct platform_device *pdev)
> +{
> +}
> +
> +static inline int rcar_cmm_setup(struct platform_device *pdev,
> +				 const struct rcar_cmm_config *config)
> +{
> +	return 0;
> +}
> +#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */
> +
> +#endif /* __RCAR_CMM_H__ */

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux