On Tue, Oct 15, 2019 at 05:41:53PM +0200, Noralf Trønnes wrote: > Den 15.10.2019 16.32, skrev Andy Shevchenko: > > On Fri, Jul 19, 2019 at 05:59:10PM +0200, Noralf Trønnes wrote: > >> spi-bcm2835 can handle >64kB buffers now so there is no need to check > >> ->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is > >> not used by any callers, so not needed. > >> > >> Then we have the spi_max module parameter. It was added because > >> staging/fbtft has support for it and there was a report that someone used > >> it to set a small buffer size to avoid popping on a USB soundcard on a > >> Raspberry Pi. In hindsight it shouldn't have been added, I should have > >> waited for it to become a problem first. I don't know it anyone is > >> actually using it, but since tinydrm_spi_transfer() is being moved to > >> mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to > >> mipi-dbi if someone complains. > >> > >> With that out of the way, spi_max_transfer_size() can be used instead. > >> > >> The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is > >> somewhat arbitrary, but a bigger buffer will have a miniscule impact on > >> transfer speed, so it's probably fine. > > > > This breaks the SPI PXA2xx case I'm using. The world is not a Pi:e. > > > > [ 388.445752] mi0283qt spi-PRP0001:01: DMA disabled for transfer length 153600 greater than 65536 > > [ 388.634437] mi0283qt spi-PRP0001:01: DMA disabled for transfer length 153600 greater than 65536 > > [ 388.822933] mi0283qt spi-PRP0001:01: DMA disabled for transfer length 153600 greater than 65536 > > > > The crucial thing is to check the transfer size against maximum DMA length > > of the master. > > > > Isn't this a spi controller driver problem? It doesn't matter. This patch made a regression. Before it worked, now it doesn't. > spi_max_transfer_size() tells the client what the maximum transfer > length is. The controller driver can use ctlr->max_transfer_size if it > has restrictions. It might be a problem of the SPI core. > AFAIUI max_dma_len is used when splitting up the buffer for the sg table > in spi_map_buf(). > > Please, fix. Should I send the revert? -- With Best Regards, Andy Shevchenko _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
