On Tue, Oct 15, 2019 at 3:28 AM Linus Walleij <linus.walleij@xxxxxxxxxx> wrote: > > This adds a starting point for processing and defining generic > bindings used by DSI panels. We just define one single bool > property to force the panel into video mode for now. > > Cc: devicetree@xxxxxxxxxxxxxxx > Suggested-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > --- > ChangeLog v1->v2: > - New patch after feedback. > --- > .../display/panel/panel-dsi-common.yaml | 31 +++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-common.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-common.yaml > new file mode 100644 > index 000000000000..4242dc25c917 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-common.yaml > @@ -0,0 +1,31 @@ > +# SPDX-License-Identifier: GPL-2.0 (GPL-2.0-only OR BSD-2-Clause) for new bindings. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/panel-dsi-common.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Common Properties for DSI Display Panels > + > +maintainers: > + - Linus Walleij <linus.walleij@xxxxxxxxxx> > + > +description: | > + This document defines device tree properties common to DSI, Display > + Serial Interface panels. It doesn't constitue a device tree binding constitute > + specification by itself but is meant to be referenced by device tree > + bindings. > + > + When referenced from panel device tree bindings the properties defined in > + this document are defined as follows. The panel device tree bindings are > + responsible for defining whether each property is required or optional. > + > +properties: > + > + enforce-video-mode: As all DSI panels are a child of DSI controllers (unless perhaps if they are video mode only), I think this schema needs to define the DSI controller and panel (i.e. the bus) structure. Then this property can be under the child node schema. So something like this: properties: $nodename: pattern: "^dsi-controller@" "#address-cells": const: 1 "#size-cells": const: 1 patternProperties: "^panel@[0-9]$": # not sure what's the range of addresses... type: object properties: reg: maxItems: 1 items: - maximum: ?? enforce-video-mode: ... > + type: boolean > + description: > + The best option is usually to run a panel in command mode, as this > + gives better control over the panel hardware. However for different > + reasons like broken hardware, missing features or testing, it may be > + useful to be able to force a command mode-capable panel into video > + mode. > -- > 2.21.0 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
