On Wed, Oct 02, 2019 at 06:40:46PM +0200, Krzysztof Kozlowski wrote: > Convert generic PWM bindings to DT schema format using json-schema. The > consumer bindings are split to separate file. > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > > --- > > Changes since v2: > 1. Change also pwm-sprd.txt > > Changes since v1: > 1. Indent example with four spaces (more readable), > 2. Change pattern for pwm nodes, > 3. Remove $ref from #cells. > --- > diff --git a/Documentation/devicetree/bindings/pwm/pwm-consumers.yaml b/Documentation/devicetree/bindings/pwm/pwm-consumers.yaml > new file mode 100644 > index 000000000000..39c844fe6338 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/pwm-consumers.yaml > @@ -0,0 +1,76 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pwm/pwm-consumers.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Specifying PWM information for devices > + > +maintainers: > + - Thierry Reding <thierry.reding@xxxxxxxxx> > + > +description: | > + PWM properties should be named "pwms". The exact meaning of each pwms > + property must be documented in the device tree binding for each device. > + An optional property "pwm-names" may contain a list of strings to label > + each of the PWM devices listed in the "pwms" property. If no "pwm-names" > + property is given, the name of the user node will be used as fallback. > + > + Drivers for devices that use more than a single PWM device can use the > + "pwm-names" property to map the name of the PWM device requested by the > + pwm_get() call to an index into the list given by the "pwms" property. > + > +properties: > + pwms: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: | > + Phandle to PWM controller node and pwm-specifier (controller specific). > + pwm-specifier typically encodes the chip-relative PWM number and the PWM > + period in nanoseconds. > + Optionally, the pwm-specifier can encode a number of flags (defined in > + <dt-bindings/pwm/pwm.h>) in a third cell: > + - PWM_POLARITY_INVERTED: invert the PWM signal polarity > + > + pwm-names: > + $ref: /schemas/types.yaml#/definitions/string-array > + description: > + A list of strings to label each of the PWM devices listed in the "pwms" > + property. If no "pwm-names" property is given, the name of the user node > + will be used as fallback. > + > +required: > + - pwms This schema is never applied because it has no 'select' which is only automatic for $nodename or compatible. You could include this from other schemas, but why? Any consumer still has to list these properties to define their specific constraints. We already have a schema in dtschema for consumer side. It's just missing descriptions which needs relicensing from this. > + > +dependencies: > + pwm-names: [ pwms ] _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
