On Wed, Oct 09, 2019 at 02:30:32PM +0300, Dan Carpenter wrote:
> > + platform = kzalloc(sizeof(*platform), GFP_KERNEL);
> > + if (!platform) {
> > + DRM_DEV_ERROR(dev, "failed to allocate driver data\n");
> > + ret = -ENOMEM;
> > + goto exit;
>
> return -ENOMEM;
>
> > + }
> > +
> > + pdata = &platform->pdata;
> > +
> > + /* device tree parsing function call */
> > + ret = anx7625_parse_dt(&client->dev, pdata);
> > + if (ret != 0) /* if occurs error */
> > + goto err0;
>
> != 0 is double negative. Choose better label names. Remove the obvious
> comment.
>
> if (ret)
> goto free_platform;
>
> > +
> > + anx7625_init_gpio(platform);
> > +
> > + /* to access global platform data */
> > + platform->client = client;
> > + i2c_set_clientdata(client, platform);
> > +
> > + if (platform->pdata.extcon_supported) {
> > + /* get extcon device from DTS */
> > + platform->extcon = extcon_get_edev_by_phandle(&client->dev, 0);
> > + if (PTR_ERR(platform->extcon) == -EPROBE_DEFER)
> > + goto err0;
>
> Preserve the error code.
>
> > + if (IS_ERR(platform->extcon)) {
> > + DRM_DEV_ERROR(&client->dev,
> > + "can not get extcon device!");
> > + goto err0;
>
> Prerve the error code.
>
> > + }
> > +
> > + ret = anx7625_extcon_notifier_init(platform);
> > + if (ret < 0)
> > + goto err0;
> > + }
> > +
> > + atomic_set(&platform->power_status, 0);
> > +
> > + mutex_init(&platform->lock);
> > +
> > + if (platform->pdata.gpio_intr_hpd) {
> > + INIT_WORK(&platform->work, anx7625_work_func);
> > + platform->workqueue = create_workqueue("anx7625_work");
> > + if (!platform->workqueue) {
> > + DRM_DEV_ERROR(dev, "failed to create work queue\n");
> > + ret = -ENOMEM;
> > + goto err1;
>
> This goto will crash. Because you have forgotten what the most recently
> allocated resource was. It should be "goto free_platform;" still.
>
> > + }
> > +
> > + platform->pdata.hpd_irq =
> > + gpiod_to_irq(platform->pdata.gpio_intr_hpd);
> > + if (platform->pdata.hpd_irq < 0) {
> > + DRM_DEV_ERROR(dev, "failed to get gpio irq\n");
> > + goto err1;
>
> goto free_wq;
>
> > + }
> > +
> > + ret = request_threaded_irq(platform->pdata.hpd_irq,
> > + NULL, anx7625_intr_hpd_isr,
> > + IRQF_TRIGGER_FALLING |
> > + IRQF_TRIGGER_RISING |
> > + IRQF_ONESHOT,
> > + "anx7625-hpd", platform);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "failed to request irq\n");
> > + goto err1;
> > + }
> > +
> > + ret = irq_set_irq_wake(platform->pdata.hpd_irq, 1);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "Request irq for hpd");
> > + DRM_DEV_ERROR(dev, "interrupt wake set fail\n");
> > + goto err1;
> > + }
> > +
> > + ret = enable_irq_wake(platform->pdata.hpd_irq);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev, "Enable irq for HPD");
> > + DRM_DEV_ERROR(dev, "interrupt wake enable fail\n");
> > + goto err1;
> > + }
> > + }
> > +
> > + if (anx7625_register_i2c_dummy_clients(platform, client) != 0) {
>
> Preserve the error code.
>
> ret = anx7625_register_i2c_dummy_clients();
> if (ret)
> goto free_platform;
>
I meant goto free_wq here. That's the most recent allocation.
regards,
dan carpenter
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
