Re: [PATCH v3 3/5] drm/rockchip: Add optional support for CRTC gamma LUT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2019-10-08 at 16:03 -0400, Sean Paul wrote:
> On Tue, Oct 08, 2019 at 04:33:35PM -0300, Ezequiel Garcia wrote:
> > On Tue, 2019-10-08 at 16:23 -0300, Ezequiel Garcia wrote:
> > > Hello Sean,
> > > 
> > > On Mon, 2019-10-07 at 14:54 -0400, Sean Paul wrote:
> > > > On Mon, Sep 30, 2019 at 07:28:00PM -0300, Ezequiel Garcia wrote:
> > > > > Add an optional CRTC gamma LUT support, and enable it on RK3288.
> > > > > This is currently enabled via a separate address resource,
> > > > > which needs to be specified in the devicetree.
> > > > > 
> > > > > The address resource is required because on some SoCs, such as
> > > > > RK3288, the LUT address is after the MMU address, and the latter
> > > > > is supported by a different driver. This prevents the DRM driver
> > > > > from requesting an entire register space.
> > > > > 
> > > > > The current implementation works for RGB 10-bit tables, as that
> > > > > is what seems to work on RK3288.
> > > > > 
> > > > > Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
> > > > > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > > > > Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > > > > ---
> > > > > Changes from v2:
> > > > > * None.
> > > > > 
> > > > > Changes from v1:
> > > > > * drop explicit linear LUT after finding a proper
> > > > >   way to disable gamma correction.
> > > > > * avoid setting gamma is the CRTC is not active.
> > > > > * s/int/unsigned int as suggested by Jacopo.
> > > > > * only enable color management and set gamma size
> > > > >   if gamma LUT is supported, suggested by Doug.
> > > > > * drop the reg-names usage, and instead just use indexed reg
> > > > >   specifiers, suggested by Doug.
> > > > > 
> > > > > Changes from RFC:
> > > > > * Request (an optional) address resource for the LUT.
> > > > > * Drop support for RK3399, which doesn't seem to work
> > > > >   out of the box and needs more research.
> > > > > * Support pass-thru setting when GAMMA_LUT is NULL.
> > > > > * Add a check for the gamma size, as suggested by Ilia.
> > > > > * Move gamma setting to atomic_commit_tail, as pointed
> > > > >   out by Jacopo/Laurent, is the correct way.
> > > > > ---
> > > > >  drivers/gpu/drm/rockchip/rockchip_drm_fb.c  |   3 +
> > > > >  drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 114 ++++++++++++++++++++
> > > > >  drivers/gpu/drm/rockchip/rockchip_drm_vop.h |   7 ++
> > > > >  drivers/gpu/drm/rockchip/rockchip_vop_reg.c |   2 +
> > > > >  4 files changed, 126 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
> > > > > index dba352ec0ee3..fd1d987698ab 100644
> > > > > --- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
> > > > > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c
> > > > > @@ -17,6 +17,7 @@
> > > > >  #include "rockchip_drm_drv.h"
> > > > >  #include "rockchip_drm_fb.h"
> > > > >  #include "rockchip_drm_gem.h"
> > > > > +#include "rockchip_drm_vop.h"
> > > > >  
> > > > >  static const struct drm_framebuffer_funcs rockchip_drm_fb_funcs = {
> > > > >  	.destroy       = drm_gem_fb_destroy,
> > > > > @@ -112,6 +113,8 @@ rockchip_atomic_helper_commit_tail_rpm(struct drm_atomic_state *old_state)
> > > > >  
> > > > >  	drm_atomic_helper_commit_modeset_disables(dev, old_state);
> > > > >  
> > > > > +	rockchip_drm_vop_gamma_set(old_state);
> > > > > +
> > > > 
> > > > Instead of duplicating the commit_tail helper, could you just implement
> > > > .atomic_begin() and call this from there? I think the only hitch is if you
> > > > need this to be completed before crtc->atomic_enable(), at which point you
> > > > might need to call it from vop_crtc_atomic_enable() and then detect that in
> > > > atomic_begin()
> > > > 
> > > 
> > > I think moving this to .atomic_begin might be enough. Let me send a new
> > > series and we can see how that goes.
> > > 
> > 
> > Oh, before going forward, pleaste note that the first iteration
> > of this patch (as noted in the changelog) was applying the gamma lut
> > on .atomic_flush. However, Laurent and Jacopo pointed out that
> > it might add some tearing to do so, and that's why it was moved
> > to commit_tail.
> > 
> > I have to admit I'm not too sure about the difference between
> > applying this gamma LUT on atomic_begin or atomic_flush,
> > perhaps you can clarify that?
> 
> The only difference between what you have now and calling it in atomic_begin
> is that as you have it now, it's set before crtc->atomic_enable() is called.
> I think in order to address Ville's concerns on the other patch, you'll need
> to set it the lut in .atomic_enable() anyways, so here's what I would suggest:
> 
> - Set the LUT in .atomic_enable() wherever it makes sense (you have it at the
>   start now)
> - Add an .atomic_begin() implementation and check state->color_mgmt_changed and
>   state->active_changed. color_mgmt_changed && !active_changed, set the lut
> - Remove patches 1 & 5
> 
> ...I think :-)
> 

OK, that helped! Patches in 3...2...

Regards,
Ezequiel

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux