Hi Rob,
On Wed, Sep 4, 2019 at 2:19 PM Rob Clark <robdclark@xxxxxxxxx> wrote:
>
> From: Rob Clark <robdclark@xxxxxxxxxxxx>
>
> Looks like the dma_sync calls don't do what we want on armv7 either.
> Fixes:
>
> Unable to handle kernel paging request at virtual address 50001000
> pgd = (ptrval)
> [50001000] *pgd=00000000
> Internal error: Oops: 805 [#1] SMP ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc6-00271-g9f159ae07f07 #4
> Hardware name: Freescale i.MX53 (Device Tree Support)
> PC is at v7_dma_clean_range+0x20/0x38
> LR is at __dma_page_cpu_to_dev+0x28/0x90
> pc : [<c011c76c>] lr : [<c01181c4>] psr: 20000013
> sp : d80b5a88 ip : de96c000 fp : d840ce6c
> r10: 00000000 r9 : 00000001 r8 : d843e010
> r7 : 00000000 r6 : 00008000 r5 : ddb6c000 r4 : 00000000
> r3 : 0000003f r2 : 00000040 r1 : 50008000 r0 : 50001000
> Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> Control: 10c5387d Table: 70004019 DAC: 00000051
> Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
>
> Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
> Fixes: 3de433c5b38a ("drm/msm: Use the correct dma_sync calls in msm_gem")
> Tested-by: Fabio Estevam <festevam@xxxxxxxxx>
I see this one got applied in linux-next already.
Could it be sent to 5.4-rc, please?
mx53 boards cannot boot in mainline because of this.
Thanks
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
