The formula in the BSP kernel indicates that a 16-byte overhead is used when sending the HFP. However, this value is currently set to 6 in the sun6i_mipi_dsi driver, which makes some panels flashing. Fix this overhead value. Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index b8a0d0501ca7..8fe8051c34e6 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -569,11 +569,12 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD); /* - * The frontporch is set using a blanking packet (4 - * bytes + payload + 2 bytes). Its minimal size is - * therefore 6 bytes + * The frontporch is set using a sync event (4 bytes) + * and two blanking packets (each one is 4 bytes + + * payload + 2 bytes). Its minimal size is therefore + * 16 bytes */ -#define HFP_PACKET_OVERHEAD 6 +#define HFP_PACKET_OVERHEAD 16 hfp = max((unsigned int)HFP_PACKET_OVERHEAD, (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD); -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
