- Format the pipe diagram as a monospace block. - Fix formatting of the list. Without the empty line, the first dash is not parsed as a bullet point. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- drivers/gpu/drm/mcde/mcde_drv.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c index 9a09eba53182..c535abed4765 100644 --- a/drivers/gpu/drm/mcde/mcde_drv.c +++ b/drivers/gpu/drm/mcde/mcde_drv.c @@ -20,11 +20,11 @@ * input formats including most variants of RGB and YUV. * * The hardware has four display pipes, and the layout is a little - * bit like this: + * bit like this:: * - * Memory -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI - * External 0..5 0..3 A,B, 3 x DSI bridge - * source 0..9 C0,C1 2 x DPI + * Memory -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI + * External 0..5 0..3 A,B, 3 x DSI bridge + * source 0..9 C0,C1 2 x DPI * * FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for * panels with embedded buffer. @@ -43,6 +43,7 @@ * to change as we exploit more of the hardware capabilities. * * TODO: + * * - Enabled damaged rectangles using drm_plane_enable_fb_damage_clips() * so we can selectively just transmit the damaged area to a * command-only display. -- 2.20.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
