Hi Laurent, On 07/07/2019 21:18, Laurent Pinchart wrote:
Display connectors are modelled in DT as a device node, but have so far been handled manually in several bridge drivers. This resulted in duplicate code in several bridge drivers, with slightly different (and thus confusing) logics. In order to fix this, implement a bridge driver for display connectors. The driver centralises logic for the DVI, HDMI, VGAn composite and S-video connectors and exposes corresponding bridge operations. This driver in itself doesn't solve the issue completely, changes in bridge and display controller drivers are needed to make use of the new connector driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- drivers/gpu/drm/bridge/Kconfig | 11 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/display-connector.c | 327 +++++++++++++++++++++ 3 files changed, 339 insertions(+) create mode 100644 drivers/gpu/drm/bridge/display-connector.c
+ dev_info(&pdev->dev, + "Found %s display connector '%s' %s DDC bus and %s HPD GPIO (ops 0x%x)\n", + display_connector_type_name(conn), + conn->label ? conn->label : "<unlabelled>", + conn->ddc ? "with" : "without", + conn->hpd_gpio ? "with" : "without", + conn->bridge.ops);
dev_dbg()? Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
