On Mon, Sep 30, 2019 at 10:05 AM Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> wrote: > > Hi Karol, > > On Fri, Sep 27, 2019 at 11:53:48PM +0200, Karol Herbst wrote: > > > What exactly is the serious issue? I guess it's that the rescan > > > doesn't detect the GPU, which means it's not responding to config > > > accesses? Is there any timing component here, e.g., maybe we're > > > missing some delay like the ones Mika is adding to the reset paths? > > > > When I was checking up on some of the PCI registers of the bridge > > controller, the slot detection told me that there is no device > > recognized anymore. I don't know which register it was anymore, though > > I guess one could read it up in the SoC spec document by Intel. > > > > My guess is, that the bridge controller fails to detect the GPU being > > here or actively threw it of the bus or something. But a normal system > > suspend/resume cycle brings the GPU back online (doing a rescan via > > sysfs gets the device detected again) > > Can you elaborate a bit what kind of scenario the issue happens (e.g > steps how it reproduces)? It was not 100% clear from the changelog. Also > what the result when the failure happens? > yeah, I already have an updated patch in the works which also does the rework Bjorn suggested. Had no time yet to test if I didn't mess it up. I am also thinking of adding a kernel parameter to enable this workaround on demand, but not quite sure on that one yet. > I see there is a script that does something but unfortunately I'm not > fluent in Python so can't extract the steps how the issue can be > reproduced ;-) > > One thing that I'm working on is that Linux PCI subsystem misses certain > delays that are needed after D3cold -> D0 transition, otherwise the > device and/or link may not be ready before we access it. What you are > experiencing sounds similar. I wonder if you could try the following > patch and see if it makes any difference? > > https://patchwork.kernel.org/patch/11106611/ I think I already tried this path. The problem isn't that the device isn't accessible too late, but that it seems that the device completely falls off the bus. But I can retest again just to be sure. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
