The mode_config max width/height values determine the maximum
resolution the pixel reader can handle. But the same values are
used to restrict the size of the framebuffer creation. Hardware's
with scaling blocks can operate on framebuffers larger/smaller than
that of the pixel reader resolutions by scaling them down/up before
rendering.
This changes adds a separate framebuffer max width/height fields
in drm_mode_config to allow vendors to set if they are different
than that of the default max resolution values.
Vendors setting these fields should fix their mode_set paths too
by filtering and validating the modes against the appropriate max
fields in their mode_valid() implementations.
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Signed-off-by: Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/drm_framebuffer.c | 15 +++++++++++----
include/drm/drm_mode_config.h | 3 +++
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c
index 5756431..2083168 100644
--- a/drivers/gpu/drm/drm_framebuffer.c
+++ b/drivers/gpu/drm/drm_framebuffer.c
@@ -300,14 +300,21 @@ struct drm_framebuffer *
return ERR_PTR(-EINVAL);
}
- if ((config->min_width > r->width) || (r->width > config->max_width)) {
+ if ((config->min_width > r->width) ||
+ (!config->max_fb_width && r->width > config->max_width) ||
+ (config->max_fb_width && r->width > config->max_fb_width)) {
DRM_DEBUG_KMS("bad framebuffer width %d, should be >= %d && <= %d\n",
- r->width, config->min_width, config->max_width);
+ r->width, config->min_width, config->max_fb_width ?
+ config->max_fb_width : config->max_width);
return ERR_PTR(-EINVAL);
}
- if ((config->min_height > r->height) || (r->height > config->max_height)) {
+
+ if ((config->min_height > r->height) ||
+ (!config->max_fb_height && r->height > config->max_height) ||
+ (config->max_fb_height && r->height > config->max_fb_height)) {
DRM_DEBUG_KMS("bad framebuffer height %d, should be >= %d && <= %d\n",
- r->height, config->min_height, config->max_height);
+ r->height, config->min_height, config->max_fb_width ?
+ config->max_fb_height : config->max_height);
return ERR_PTR(-EINVAL);
}
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 3bcbe30..c6394ed 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -339,6 +339,8 @@ struct drm_mode_config_funcs {
* @min_height: minimum fb pixel height on this device
* @max_width: maximum fb pixel width on this device
* @max_height: maximum fb pixel height on this device
+ * @max_fb_width: maximum fb buffer width if differs from max_width
+ * @max_fb_height: maximum fb buffer height if differs from max_height
* @funcs: core driver provided mode setting functions
* @fb_base: base address of the framebuffer
* @poll_enabled: track polling support for this device
@@ -523,6 +525,7 @@ struct drm_mode_config {
int min_width, min_height;
int max_width, max_height;
+ int max_fb_width, max_fb_height;
const struct drm_mode_config_funcs *funcs;
resource_size_t fb_base;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
