From: Lucas Stach <l.stach@xxxxxxxxxxxxxx> [ Upstream commit f8c6bfc612b56f02e1b8fae699dff12738aaf889 ] The horizontal blanking periods are too short, as the values are specified for a single LVDS channel. Since this panel is dual LVDS they need to be doubled. With this change the panel reaches its nominal vrefresh rate of 60Fps, instead of the 64Fps with the current wrong blanking. Philipp Zabel added: The datasheet specifies 960 active clocks + 40/128/160 clocks blanking on each of the two LVDS channels (min/typical/max), so doubled this is now correct. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Link: https://patchwork.freedesktop.org/patch/msgid/1562764060.23869.12.camel@xxxxxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/gpu/drm/panel/panel-simple.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 5a93c4edf1e43..ee6900eb39069 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -724,9 +724,9 @@ static const struct panel_desc auo_g133han01 = { static const struct display_timing auo_g185han01_timings = { .pixelclock = { 120000000, 144000000, 175000000 }, .hactive = { 1920, 1920, 1920 }, - .hfront_porch = { 18, 60, 74 }, - .hback_porch = { 12, 44, 54 }, - .hsync_len = { 10, 24, 32 }, + .hfront_porch = { 36, 120, 148 }, + .hback_porch = { 24, 88, 108 }, + .hsync_len = { 20, 48, 64 }, .vactive = { 1080, 1080, 1080 }, .vfront_porch = { 6, 10, 40 }, .vback_porch = { 2, 5, 20 }, -- 2.20.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
