[PATCH v2 1/2] drm/komeda: Add line size support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Lowry Li (Arm Technology China)" <Lowry.Li@xxxxxxx>

On D71, we are using the global line size. From D32, every
component have a line size register to indicate the fifo size.

So this patch is to set line size support and do the line size
check.

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@xxxxxxx>
---
 .../arm/display/komeda/d71/d71_component.c    | 57 ++++++++++++++++---
 .../gpu/drm/arm/display/komeda/d71/d71_regs.h |  9 +--
 .../drm/arm/display/komeda/komeda_pipeline.h  |  2 +
 .../display/komeda/komeda_pipeline_state.c    | 17 ++++++
 4 files changed, 70 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
index 7b374a3b911e..357837b9d6ed 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
@@ -106,6 +106,23 @@ static void dump_block_header(struct seq_file *sf, void __iomem *reg)
 			   i, hdr.output_ids[i]);
 }
 
+/* On D71, we are using the global line size. From D32, every component have
+ * a line size register to indicate the fifo size.
+ */
+static u32 __get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg,
+			       u32 max_default)
+{
+	if (!d71->periph_addr)
+		max_default = malidp_read32(reg, BLK_MAX_LINE_SIZE);
+
+	return max_default;
+}
+
+static u32 get_blk_line_size(struct d71_dev *d71, u32 __iomem *reg)
+{
+	return __get_blk_line_size(d71, reg, d71->max_line_size);
+}
+
 static u32 to_rot_ctrl(u32 rot)
 {
 	u32 lr_ctrl = 0;
@@ -365,7 +382,28 @@ static int d71_layer_init(struct d71_dev *d71,
 	else
 		layer->layer_type = KOMEDA_FMT_SIMPLE_LAYER;
 
-	set_range(&layer->hsize_in, 4, d71->max_line_size);
+	if (!d71->periph_addr) {
+		/* D32 or newer product */
+		layer->line_sz = malidp_read32(reg, BLK_MAX_LINE_SIZE);
+		layer->yuv_line_sz = L_INFO_YUV_MAX_LINESZ(layer_info);
+	} else if (d71->max_line_size > 2048) {
+		/* D71 4K */
+		layer->line_sz = d71->max_line_size;
+		layer->yuv_line_sz = layer->line_sz / 2;
+	} else	{
+		/* D71 2K */
+		if (layer->layer_type == KOMEDA_FMT_RICH_LAYER) {
+			/* rich layer is 4K configuration */
+			layer->line_sz = d71->max_line_size * 2;
+			layer->yuv_line_sz = layer->line_sz / 2;
+		} else {
+			layer->line_sz = d71->max_line_size;
+			layer->yuv_line_sz = 0;
+		}
+	}
+
+	set_range(&layer->hsize_in, 4, layer->line_sz);
+
 	set_range(&layer->vsize_in, 4, d71->max_vsize);
 
 	malidp_write32(reg, LAYER_PALPHA, D71_PALPHA_DEF_MAP);
@@ -456,9 +494,11 @@ static int d71_wb_layer_init(struct d71_dev *d71,
 
 	wb_layer = to_layer(c);
 	wb_layer->layer_type = KOMEDA_FMT_WB_LAYER;
+	wb_layer->line_sz = get_blk_line_size(d71, reg);
+	wb_layer->yuv_line_sz = wb_layer->line_sz;
 
-	set_range(&wb_layer->hsize_in, D71_MIN_LINE_SIZE, d71->max_line_size);
-	set_range(&wb_layer->vsize_in, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
+	set_range(&wb_layer->hsize_in, 64, wb_layer->line_sz);
+	set_range(&wb_layer->vsize_in, 64, d71->max_vsize);
 
 	return 0;
 }
@@ -595,8 +635,8 @@ static int d71_compiz_init(struct d71_dev *d71,
 
 	compiz = to_compiz(c);
 
-	set_range(&compiz->hsize, D71_MIN_LINE_SIZE, d71->max_line_size);
-	set_range(&compiz->vsize, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
+	set_range(&compiz->hsize, 64, get_blk_line_size(d71, reg));
+	set_range(&compiz->vsize, 64, d71->max_vsize);
 
 	return 0;
 }
@@ -753,7 +793,7 @@ static int d71_scaler_init(struct d71_dev *d71,
 	}
 
 	scaler = to_scaler(c);
-	set_range(&scaler->hsize, 4, 2048);
+	set_range(&scaler->hsize, 4, __get_blk_line_size(d71, reg, 2048));
 	set_range(&scaler->vsize, 4, 4096);
 	scaler->max_downscaling = 6;
 	scaler->max_upscaling = 64;
@@ -862,7 +902,7 @@ static int d71_splitter_init(struct d71_dev *d71,
 
 	splitter = to_splitter(c);
 
-	set_range(&splitter->hsize, 4, d71->max_line_size);
+	set_range(&splitter->hsize, 4, get_blk_line_size(d71, reg));
 	set_range(&splitter->vsize, 4, d71->max_vsize);
 
 	return 0;
@@ -933,7 +973,8 @@ static int d71_merger_init(struct d71_dev *d71,
 
 	merger = to_merger(c);
 
-	set_range(&merger->hsize_merged, 4, 4032);
+	set_range(&merger->hsize_merged, 4,
+		  __get_blk_line_size(d71, reg, 4032));
 	set_range(&merger->vsize_merged, 4, 4096);
 
 	return 0;
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
index 2d5e6d00b42c..1727dc993909 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
@@ -10,6 +10,7 @@
 /* Common block registers offset */
 #define BLK_BLOCK_INFO		0x000
 #define BLK_PIPELINE_INFO	0x004
+#define BLK_MAX_LINE_SIZE	0x008
 #define BLK_VALID_INPUT_ID0	0x020
 #define BLK_OUTPUT_ID0		0x060
 #define BLK_INPUT_ID0		0x080
@@ -321,6 +322,7 @@
 #define L_INFO_RF		BIT(0)
 #define L_INFO_CM		BIT(1)
 #define L_INFO_ABUF_SIZE(x)	(((x) >> 4) & 0x7)
+#define L_INFO_YUV_MAX_LINESZ(x)	(((x) >> 16) & 0xFFFF)
 
 /* Scaler registers */
 #define SC_COEFFTAB		0x0DC
@@ -494,13 +496,6 @@ enum d71_blk_type {
 #define D71_DEFAULT_PREPRETCH_LINE	5
 #define D71_BUS_WIDTH_16_BYTES		16
 
-#define D71_MIN_LINE_SIZE		64
-#define D71_MIN_VERTICAL_SIZE		64
-#define D71_SC_MIN_LIN_SIZE		4
-#define D71_SC_MIN_VERTICAL_SIZE	4
-#define D71_SC_MAX_LIN_SIZE		2048
-#define D71_SC_MAX_VERTICAL_SIZE	4096
-
 #define D71_SC_MAX_UPSCALING		64
 #define D71_SC_MAX_DOWNSCALING		6
 #define D71_SC_SPLIT_OVERLAP		8
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
index 910d279ae48d..92aba58ce2a5 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
@@ -227,6 +227,8 @@ struct komeda_layer {
 	/* accepted h/v input range before rotation */
 	struct malidp_range hsize_in, vsize_in;
 	u32 layer_type; /* RICH, SIMPLE or WB */
+	u32 line_sz;
+	u32 yuv_line_sz; /* maximum line size for YUV422 and YUV420 */
 	u32 supported_rots;
 	/* komeda supports layer split which splits a whole image to two parts
 	 * left and right and handle them by two individual layer processors
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
index 5526731f5a33..6df442666cfe 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
@@ -285,6 +285,7 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
 		       struct komeda_data_flow_cfg *dflow)
 {
 	u32 src_x, src_y, src_w, src_h;
+	u32 line_sz, max_line_sz;
 
 	if (!komeda_fb_is_layer_supported(kfb, layer->layer_type, dflow->rot))
 		return -EINVAL;
@@ -314,6 +315,22 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
 		return -EINVAL;
 	}
 
+	if (drm_rotation_90_or_270(dflow->rot))
+		line_sz = dflow->in_h;
+	else
+		line_sz = dflow->in_w;
+
+	if (kfb->base.format->hsub > 1)
+		max_line_sz = layer->yuv_line_sz;
+	else
+		max_line_sz = layer->line_sz;
+
+	if (line_sz > max_line_sz) {
+		DRM_DEBUG_ATOMIC("Required line_sz: %d exceeds the max size %d\n",
+				 line_sz, max_line_sz);
+		return -EINVAL;
+	}
+
 	return 0;
 }
 
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux