> -----Original Message-----
> From: Jason Wang <jasowang@xxxxxxxxxx>
> Sent: Monday, September 23, 2019 8:03 AM
> To: kvm@xxxxxxxxxxxxxxx; linux-s390@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx; intel-
> gfx@xxxxxxxxxxxxxxxxxxxxx; intel-gvt-dev@xxxxxxxxxxxxxxxxxxxxx;
> kwankhede@xxxxxxxxxx; alex.williamson@xxxxxxxxxx; mst@xxxxxxxxxx;
> tiwei.bie@xxxxxxxxx
> Cc: virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx;
> cohuck@xxxxxxxxxx; maxime.coquelin@xxxxxxxxxx;
> cunming.liang@xxxxxxxxx; zhihong.wang@xxxxxxxxx;
> rob.miller@xxxxxxxxxxxx; xiao.w.wang@xxxxxxxxx;
> haotian.wang@xxxxxxxxxx; zhenyuw@xxxxxxxxxxxxxxx; zhi.a.wang@xxxxxxxxx;
> jani.nikula@xxxxxxxxxxxxxxx; joonas.lahtinen@xxxxxxxxxxxxxxx;
> rodrigo.vivi@xxxxxxxxx; airlied@xxxxxxxx; daniel@xxxxxxxx;
> farman@xxxxxxxxxxxxx; pasic@xxxxxxxxxxxxx; sebott@xxxxxxxxxxxxx;
> oberpar@xxxxxxxxxxxxx; heiko.carstens@xxxxxxxxxx; gor@xxxxxxxxxxxxx;
> borntraeger@xxxxxxxxxx; akrowiak@xxxxxxxxxxxxx; freude@xxxxxxxxxxxxx;
> lingshan.zhu@xxxxxxxxx; Ido Shamay <idos@xxxxxxxxxxxx>;
> eperezma@xxxxxxxxxx; lulu@xxxxxxxxxx; Parav Pandit
> <parav@xxxxxxxxxxxx>; Jason Wang <jasowang@xxxxxxxxxx>
> Subject: [PATCH 4/6] virtio: introduce a mdev based transport
>
> This patch introduces a new mdev transport for virtio. This is used to use kernel
> virtio driver to drive the mediated device that is capable of populating
> virtqueue directly.
>
> A new virtio-mdev driver will be registered to the mdev bus, when a new virtio-
> mdev device is probed, it will register the device with mdev based config ops.
> This means it is a software transport between mdev driver and mdev device.
> The transport was implemented through device specific opswhich is a part of
> mdev_parent_ops now.
>
> Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> ---
> MAINTAINERS | 1 +
> drivers/vfio/mdev/Kconfig | 7 +
> drivers/vfio/mdev/Makefile | 1 +
> drivers/vfio/mdev/virtio_mdev.c | 416 ++++++++++++++++++++++++++++++++
> 4 files changed, 425 insertions(+)
> create mode 100644 drivers/vfio/mdev/virtio_mdev.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 89832b316500..820ec250cc52 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17202,6 +17202,7 @@ F: include/linux/virtio*.h
> F: include/uapi/linux/virtio_*.h
> F: drivers/crypto/virtio/
> F: mm/balloon_compaction.c
> +F: drivers/vfio/mdev/virtio_mdev.c
>
> VIRTIO BLOCK AND SCSI DRIVERS
> M: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
> diff --git a/drivers/vfio/mdev/Kconfig b/drivers/vfio/mdev/Kconfig index
> 5da27f2100f9..c488c31fc137 100644
> --- a/drivers/vfio/mdev/Kconfig
> +++ b/drivers/vfio/mdev/Kconfig
> @@ -16,3 +16,10 @@ config VFIO_MDEV_DEVICE
> default n
> help
> VFIO based driver for Mediated devices.
> +
> +config VIRTIO_MDEV_DEVICE
> + tristate "VIRTIO driver for Mediated devices"
> + depends on VFIO_MDEV && VIRTIO
> + default n
> + help
> + VIRTIO based driver for Mediated devices.
> diff --git a/drivers/vfio/mdev/Makefile b/drivers/vfio/mdev/Makefile index
> 101516fdf375..99d31e29c23e 100644
> --- a/drivers/vfio/mdev/Makefile
> +++ b/drivers/vfio/mdev/Makefile
> @@ -4,3 +4,4 @@ mdev-y := mdev_core.o mdev_sysfs.o mdev_driver.o
>
> obj-$(CONFIG_VFIO_MDEV) += mdev.o
> obj-$(CONFIG_VFIO_MDEV_DEVICE) += vfio_mdev.o
> +obj-$(CONFIG_VIRTIO_MDEV_DEVICE) += virtio_mdev.o
> diff --git a/drivers/vfio/mdev/virtio_mdev.c b/drivers/vfio/mdev/virtio_mdev.c
> new file mode 100644 index 000000000000..919a082adc9c
> --- /dev/null
> +++ b/drivers/vfio/mdev/virtio_mdev.c
> @@ -0,0 +1,416 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * VIRTIO based driver for Mediated device
> + *
> + * Copyright (c) 2019, Red Hat. All rights reserved.
> + * Author: Jason Wang <jasowang@xxxxxxxxxx>
> + *
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/uuid.h>
> +#include <linux/mdev.h>
> +#include <linux/virtio_mdev.h>
> +#include <linux/virtio.h>
> +#include <linux/virtio_config.h>
> +#include <linux/virtio_ring.h>
> +#include "mdev_private.h"
> +
> +#define DRIVER_VERSION "0.1"
> +#define DRIVER_AUTHOR "Red Hat Corporation"
> +#define DRIVER_DESC "VIRTIO based driver for Mediated device"
> +
> +#define to_virtio_mdev_device(dev) \
> + container_of(dev, struct virtio_mdev_device, vdev)
> +
> +struct virtio_mdev_device {
> + struct virtio_device vdev;
> + struct mdev_device *mdev;
> + unsigned long version;
> +
> + struct virtqueue **vqs;
Every lock must need a comment to describe what it locks.
I don't see this lock is used in this patch. Please introduce in the patch that uses it.
> + spinlock_t lock;
> +};
> +
> +struct virtio_mdev_vq_info {
> + /* the actual virtqueue */
> + struct virtqueue *vq;
> +
> + /* the list node for the virtqueues list */
> + struct list_head node;
> +};
> +
> +static struct mdev_device *vm_get_mdev(struct virtio_device *vdev) {
> + struct virtio_mdev_device *vm_dev = to_virtio_mdev_device(vdev);
> + struct mdev_device *mdev = vm_dev->mdev;
> +
> + return mdev;
> +}
> +
> +static const struct virtio_mdev_parent_ops *mdev_get_parent_ops(struct
> +mdev_device *mdev) {
> + struct mdev_parent *parent = mdev->parent;
> +
> + return parent->ops->device_ops;
> +}
> +
> +static void virtio_mdev_get(struct virtio_device *vdev, unsigned offset,
> + void *buf, unsigned len)
> +{
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + ops->get_config(mdev, offset, buf, len); }
> +
> +static void virtio_mdev_set(struct virtio_device *vdev, unsigned offset,
> + const void *buf, unsigned len)
> +{
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + ops->set_config(mdev, offset, buf, len); }
> +
> +static u32 virtio_mdev_generation(struct virtio_device *vdev) {
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + return ops->get_generation(mdev);
> +}
> +
> +static u8 virtio_mdev_get_status(struct virtio_device *vdev) {
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + return ops->get_status(mdev);
> +}
> +
> +static void virtio_mdev_set_status(struct virtio_device *vdev, u8
> +status) {
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + return ops->set_status(mdev, status);
> +}
> +
> +static void virtio_mdev_reset(struct virtio_device *vdev) {
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + return ops->set_status(mdev, 0);
> +}
> +
> +static bool virtio_mdev_notify(struct virtqueue *vq) {
> + struct mdev_device *mdev = vm_get_mdev(vq->vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + ops->kick_vq(mdev, vq->index);
> +
> + return true;
> +}
> +
> +static irqreturn_t virtio_mdev_config_cb(void *private) {
> + struct virtio_mdev_device *vm_dev = private;
> +
> + virtio_config_changed(&vm_dev->vdev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t virtio_mdev_virtqueue_cb(void *private) {
> + struct virtio_mdev_vq_info *info = private;
> +
> + return vring_interrupt(0, info->vq);
> +}
> +
> +static struct virtqueue *
> +virtio_mdev_setup_vq(struct virtio_device *vdev, unsigned index,
> + void (*callback)(struct virtqueue *vq),
> + const char *name, bool ctx)
> +{
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> + struct virtio_mdev_vq_info *info;
> + struct virtio_mdev_callback cb;
> + struct virtqueue *vq;
> + u32 align, num;
> + u64 desc_addr, driver_addr, device_addr;
> + int err;
> +
> + if (!name)
> + return NULL;
> +
> + /* Queue shouldn't already be set up. */
> + if (ops->get_vq_ready(mdev, index)) {
> + err = -ENOENT;
> + goto error_available;
> + }
> +
No need for a goto, to single return done later.
Just do
if (ops->get_vq_ready(mdev, index))
return -ENOENT;
> + /* Allocate and fill out our active queue description */
> + info = kmalloc(sizeof(*info), GFP_KERNEL);
> + if (!info) {
> + err = -ENOMEM;
> + goto error_kmalloc;
> + }
> +
Similar to above one.
> + num = ops->get_queue_max(mdev);
> + if (num == 0) {
> + err = -ENOENT;
> + goto error_new_virtqueue;
> + }
> +
> + /* Create the vring */
> + align = ops->get_vq_align(mdev);
> + vq = vring_create_virtqueue(index, num, align, vdev,
> + true, true, ctx,
> + virtio_mdev_notify, callback, name);
> + if (!vq) {
> + err = -ENOMEM;
> + goto error_new_virtqueue;
> + }
> +
> + /* Setup virtqueue callback */
> + cb.callback = virtio_mdev_virtqueue_cb;
> + cb.private = info;
> + ops->set_vq_cb(mdev, index, &cb);
> + ops->set_vq_num(mdev, index, virtqueue_get_vring_size(vq));
> +
> + desc_addr = virtqueue_get_desc_addr(vq);
> + driver_addr = virtqueue_get_avail_addr(vq);
> + device_addr = virtqueue_get_used_addr(vq);
> +
> + if (ops->set_vq_address(mdev, index,
> + desc_addr, driver_addr,
> + device_addr)) {
> + err = -EINVAL;
> + goto err_vq;
> + }
> +
> + ops->set_vq_ready(mdev, index, 1);
> +
> + vq->priv = info;
> + info->vq = vq;
> +
> + return vq;
> +
> +err_vq:
> + vring_del_virtqueue(vq);
> +error_new_virtqueue:
> + ops->set_vq_ready(mdev, index, 0);
> + WARN_ON(ops->get_vq_ready(mdev, index));
> + kfree(info);
> +error_kmalloc:
> +error_available:
> + return ERR_PTR(err);
> +
> +}
> +
> +static void virtio_mdev_del_vq(struct virtqueue *vq) {
> + struct mdev_device *mdev = vm_get_mdev(vq->vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> + struct virtio_mdev_vq_info *info = vq->priv;
> + unsigned int index = vq->index;
> +
> + /* Select and deactivate the queue */
> + ops->set_vq_ready(mdev, index, 0);
> + WARN_ON(ops->get_vq_ready(mdev, index));
> +
> + vring_del_virtqueue(vq);
> +
> + kfree(info);
> +}
> +
> +static void virtio_mdev_del_vqs(struct virtio_device *vdev) {
> + struct virtqueue *vq, *n;
> +
> + list_for_each_entry_safe(vq, n, &vdev->vqs, list)
> + virtio_mdev_del_vq(vq);
> +}
> +
> +static int virtio_mdev_find_vqs(struct virtio_device *vdev, unsigned nvqs,
> + struct virtqueue *vqs[],
> + vq_callback_t *callbacks[],
> + const char * const names[],
> + const bool *ctx,
> + struct irq_affinity *desc)
> +{
> + struct virtio_mdev_device *vm_dev = to_virtio_mdev_device(vdev);
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> + struct virtio_mdev_callback cb;
> + int i, err, queue_idx = 0;
> +
> + vm_dev->vqs = kmalloc_array(queue_idx, sizeof(*vm_dev->vqs),
> + GFP_KERNEL);
> + if (!vm_dev->vqs)
> + return -ENOMEM;
> +
> + for (i = 0; i < nvqs; ++i) {
> + if (!names[i]) {
> + vqs[i] = NULL;
> + continue;
> + }
> +
> + vqs[i] = virtio_mdev_setup_vq(vdev, queue_idx++,
> + callbacks[i], names[i], ctx ?
> + ctx[i] : false);
> + if (IS_ERR(vqs[i])) {
> + err = PTR_ERR(vqs[i]);
> + goto err_setup_vq;
> + }
> + }
> +
> + cb.callback = virtio_mdev_config_cb;
> + cb.private = vm_dev;
> + ops->set_config_cb(mdev, &cb);
> +
> + return 0;
> +
> +err_setup_vq:
> + kfree(vm_dev->vqs);
> + virtio_mdev_del_vqs(vdev);
> + return err;
> +}
> +
> +static u64 virtio_mdev_get_features(struct virtio_device *vdev) {
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + return ops->get_features(mdev);
> +}
> +
> +static int virtio_mdev_finalize_features(struct virtio_device *vdev) {
> + struct mdev_device *mdev = vm_get_mdev(vdev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> +
> + /* Give virtio_ring a chance to accept features. */
> + vring_transport_features(vdev);
> +
> + return ops->set_features(mdev, vdev->features); }
> +
> +static const char *virtio_mdev_bus_name(struct virtio_device *vdev) {
> + struct virtio_mdev_device *vm_dev = to_virtio_mdev_device(vdev);
> + struct mdev_device *mdev = vm_dev->mdev;
> +
> + return dev_name(&mdev->dev);
> +}
> +
> +static const struct virtio_config_ops virtio_mdev_config_ops = {
> + .get = virtio_mdev_get,
> + .set = virtio_mdev_set,
> + .generation = virtio_mdev_generation,
> + .get_status = virtio_mdev_get_status,
> + .set_status = virtio_mdev_set_status,
> + .reset = virtio_mdev_reset,
> + .find_vqs = virtio_mdev_find_vqs,
> + .del_vqs = virtio_mdev_del_vqs,
> + .get_features = virtio_mdev_get_features,
> + .finalize_features = virtio_mdev_finalize_features,
> + .bus_name = virtio_mdev_bus_name,
> +};
> +
> +static void virtio_mdev_release_dev(struct device *_d) {
> + struct virtio_device *vdev =
> + container_of(_d, struct virtio_device, dev);
> + struct virtio_mdev_device *vm_dev =
> + container_of(vdev, struct virtio_mdev_device, vdev);
> +
> + devm_kfree(_d, vm_dev);
> +}
> +
> +static int virtio_mdev_probe(struct device *dev) {
> + struct mdev_device *mdev = to_mdev_device(dev);
> + const struct virtio_mdev_parent_ops *ops =
> mdev_get_parent_ops(mdev);
> + struct virtio_mdev_device *vm_dev;
> + int rc;
> +
> + vm_dev = devm_kzalloc(dev, sizeof(*vm_dev), GFP_KERNEL);
> + if (!vm_dev)
> + return -ENOMEM;
> +
> + vm_dev->vdev.dev.parent = dev;
> + vm_dev->vdev.dev.release = virtio_mdev_release_dev;
> + vm_dev->vdev.config = &virtio_mdev_config_ops;
> + vm_dev->mdev = mdev;
> + vm_dev->vqs = NULL;
> + spin_lock_init(&vm_dev->lock);
> +
> + vm_dev->version = ops->get_version(mdev);
> + if (vm_dev->version != 1) {
> + dev_err(dev, "Version %ld not supported!\n",
> + vm_dev->version);
> + return -ENXIO;
> + }
> +
> + vm_dev->vdev.id.device = ops->get_device_id(mdev);
> + if (vm_dev->vdev.id.device == 0)
> + return -ENODEV;
> +
> + vm_dev->vdev.id.vendor = ops->get_vendor_id(mdev);
> + rc = register_virtio_device(&vm_dev->vdev);
> + if (rc)
> + put_device(dev);
> +
> + dev_set_drvdata(dev, vm_dev);
No need to set drvdata when there is error returned from register_virtio_device().
> +
> + return rc;
> +
Extra line not needed.
> +}
> +
> +static void virtio_mdev_remove(struct device *dev) {
> + struct virtio_mdev_device *vm_dev = dev_get_drvdata(dev);
> +
> + unregister_virtio_device(&vm_dev->vdev);
> +}
> +
> +static struct mdev_class_id id_table[] = {
> + { MDEV_ID_VIRTIO },
> + { 0 },
> +};
> +
> +static struct mdev_driver virtio_mdev_driver = {
> + .name = "virtio_mdev",
> + .probe = virtio_mdev_probe,
> + .remove = virtio_mdev_remove,
No need for tab, just do single white space.
> + .id_table = id_table,
> +};
> +
> +static int __init virtio_mdev_init(void) {
> + return mdev_register_driver(&virtio_mdev_driver, THIS_MODULE); }
> +
> +static void __exit virtio_mdev_exit(void) {
> + mdev_unregister_driver(&virtio_mdev_driver);
> +}
> +
> +module_init(virtio_mdev_init)
> +module_exit(virtio_mdev_exit)
> +
> +MODULE_VERSION(DRIVER_VERSION);
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR(DRIVER_AUTHOR);
> +MODULE_DESCRIPTION(DRIVER_DESC);
> --
> 2.19.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
