Comment # 136
on bug 110674
from tom91136@gmail.com
Been following this thread for a while now as I just got 3 4k 60Hz monitors
connected to the 3 DP ports on my Radeon VII.
I'm getting the exact same errors discussed in this report with matching dmesg
outputs.
I've applied the patches to Fedora 31's 5.3.0-3 kernel and everything now works
perfectly!
Just a few notes:
* Idle power draw before patch was 22W in lm_sensors, now it's reading 28W,
makes sense as the memory is now properly clocked. This also loosely matches
@Tom B's results.
* I did not get the repeated `[drm] schedsdma0 is not ready, skipping` in
dmesg, however, it is still possible to trigger a freeze by toggling dpms:
xset dpms force off
Resulting in:
[ 155.431068] amdgpu: [powerplay] Failed to send message 0x28, response 0x0
[ 155.431070] amdgpu: [powerplay] [SetHardMinFreq] Set hard min uclk failed!
[ 161.334003] amdgpu: [powerplay] Failed to send message 0x26, response 0x0
[ 161.334004] amdgpu: [powerplay] Failed to set soft min gfxclk !
[ 161.334005] amdgpu: [powerplay] Failed to upload DPM Bootup Levels!
[ 164.622060] amdgpu: [powerplay] Failed to send message 0x28, response 0x0
[ 164.622062] amdgpu: [powerplay] [SetHardMinFreq] Set hard min uclk failed!
Previously, without the patch, the machine hangs. With the patch, the display
freezes for a few seconds and then power off. Mouse movement correctly turns on
all screen and everything is back to normal.
You are receiving this mail because:
- You are the assignee for the bug.
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
