On Wed, Sep 18, 2019 at 12:32 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> Convert Samsung PWM (S3C, S5P and Exynos SoCs) bindings to DT schema
> format using json-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
> ---
>
> Changes since v1:
> 1. Indent example with four spaces (more readable),
> 2. Fix samsung,pwm-outputs after review,
> 3. Remove double-quotes from clock names.
> ---
> .../devicetree/bindings/pwm/pwm-samsung.txt | 51 ---------
> .../devicetree/bindings/pwm/pwm-samsung.yaml | 107 ++++++++++++++++++
> 2 files changed, 107 insertions(+), 51 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-samsung.txt
> create mode 100644 Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
>
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
> deleted file mode 100644
> index 5538de9c2007..000000000000
> --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -* Samsung PWM timers
> -
> -Samsung SoCs contain PWM timer blocks which can be used for system clock source
> -and clock event timers, as well as to drive SoC outputs with PWM signal. Each
> -PWM timer block provides 5 PWM channels (not all of them can drive physical
> -outputs - see SoC and board manual).
> -
> -Be aware that the clocksource driver supports only uniprocessor systems.
> -
> -Required properties:
> -- compatible : should be one of following:
> - samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs
> - samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs
> - samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs
> - samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
> - Exynos4210 rev0 SoCs
> - samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
> - Exynos4x12, Exynos5250 and Exynos5420 SoCs
> -- reg: base address and size of register area
> -- interrupts: list of timer interrupts (one interrupt per timer, starting at
> - timer 0)
> -- clock-names: should contain all following required clock names:
> - - "timers" - PWM base clock used to generate PWM signals,
> - and any subset of following optional clock names:
> - - "pwm-tclk0" - first external PWM clock source,
> - - "pwm-tclk1" - second external PWM clock source.
> - Note that not all IP variants allow using all external clock sources.
> - Refer to SoC documentation to learn which clock source configurations
> - are available.
> -- clocks: should contain clock specifiers of all clocks, which input names
> - have been specified in clock-names property, in same order.
> -- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
> - the cells format. The only third cell flag supported by this binding is
> - PWM_POLARITY_INVERTED.
> -
> -Optional properties:
> -- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular
> - platform - an array of up to 5 elements being indices of PWM channels
> - (from 0 to 4), the order does not matter.
> -
> -Example:
> - pwm@7f006000 {
> - compatible = "samsung,s3c6400-pwm";
> - reg = <0x7f006000 0x1000>;
> - interrupt-parent = <&vic0>;
> - interrupts = <23>, <24>, <25>, <27>, <28>;
> - clocks = <&clock 67>;
> - clock-names = "timers";
> - samsung,pwm-outputs = <0>, <1>;
> - #pwm-cells = <3>;
> - }
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
> new file mode 100644
> index 000000000000..06d11faabff6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/pwm-samsung.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung SoC PWM timers
> +
> +maintainers:
> + - Thierry Reding <thierry.reding@xxxxxxxxx>
> + - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> +
> +description: |+
> + Samsung SoCs contain PWM timer blocks which can be used for system clock source
> + and clock event timers, as well as to drive SoC outputs with PWM signal. Each
> + PWM timer block provides 5 PWM channels (not all of them can drive physical
> + outputs - see SoC and board manual).
> +
> + Be aware that the clocksource driver supports only uniprocessor systems.
> +
> +allOf:
> + - $ref: pwm.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,s3c2410-pwm # 16-bit, S3C24xx
> + - samsung,s3c6400-pwm # 32-bit, S3C64xx
> + - samsung,s5p6440-pwm # 32-bit, S5P64x0
> + - samsung,s5pc100-pwm # 32-bit, S5PC100, S5PV210, Exynos4210 rev0 SoCs
> + - samsung,exynos4210-pwm # 32-bit, Exynos
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 3
> +
> + clock-names:
> + description: |
> + Should contain all following required clock names:
> + - "timers" - PWM base clock used to generate PWM signals,
> + and any subset of following optional clock names:
> + - "pwm-tclk0" - first external PWM clock source,
> + - "pwm-tclk1" - second external PWM clock source.
> + Note that not all IP variants allow using all external clock sources.
> + Refer to SoC documentation to learn which clock source configurations
> + are available.
> + oneOf:
> + - items:
> + - const: timers
> + - items:
> + - const: timers
> + - const: pwm-tclk0
> + - items:
> + - const: timers
> + - const: pwm-tclk1
> + - items:
> + - const: timers
> + - const: pwm-tclk0
> + - const: pwm-tclk1
> +
> + interrupts:
> + description:
> + One interrupt per timer, starting at timer 0.
> + minItems: 1
> + maxItems: 5
> +
> + "#pwm-cells":
> + description:
> + The only third cell flag supported by this binding
> + is PWM_POLARITY_INVERTED.
> + const: 3
> +
> + samsung,pwm-outputs:
> + description:
> + A list of PWM channels used as PWM outputs on particular platform.
> + It is an array of up to 5 elements being indices of PWM channels
> + (from 0 to 4), the order does not matter.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + - uniqueItems: true
> + - items:
> + minimum: 0
> + maximum: 4
> +
> +required:
> + - clocks
> + - clock-names
> + - compatible
> + - interrupts
> + - "#pwm-cells"
> + - reg
additionalProperties: false
should work here. And in the rng binding too.
Rob
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
