[PATCH 1/9] [v10, 1/9] drm/panel:Add Boe Himax8279d MIPI-DSI LCD panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add panel driver for it.

Signed-off-by: Jerry Han <hanxu5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
 MAINTAINERS                                  |   6 +
 drivers/gpu/drm/panel/Kconfig                |  11 +
 drivers/gpu/drm/panel/Makefile               |   1 +
 drivers/gpu/drm/panel/panel-boe-himax8279d.c | 593 +++++++++++++++++++
 4 files changed, 611 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-boe-himax8279d.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 28f4a20940cb..7c6ac18b922e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5110,6 +5110,12 @@ S:	Maintained
 F:	drivers/gpu/drm/tiny/ili9225.c
 F:	Documentation/devicetree/bindings/display/ilitek,ili9225.txt
 
+DRM DRIVER FOR BOE HIMAX8279D PANELS
+M:	Jerry Han <hanxu5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
+S:	Maintained
+F:	drivers/gpu/drm/panel/panel-boe-himax8279d.c
+F:	Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
+
 DRM DRIVER FOR HX8357D PANELS
 M:	Eric Anholt <eric@xxxxxxxxxx>
 T:	git git://anongit.freedesktop.org/drm/drm-misc
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index f152bc4eeb53..cfd8c886fff7 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -339,6 +339,17 @@ config DRM_PANEL_TPO_TD043MTEA1
 	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
 	  4.3" panel (found on the OMAP3 Pandora board).
 
+config DRM_PANEL_BOE_HIMAX8279D
+	tristate "Boe Himax8279d panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Same type
+	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
 config DRM_PANEL_TPO_TPG110
 	tristate "TPO TPG 800x400 panel"
 	depends on OF && SPI && GPIOLIB
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index b6cd39fe0f20..a771c92f880a 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -36,5 +36,6 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
 obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
+obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
diff --git a/drivers/gpu/drm/panel/panel-boe-himax8279d.c b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
new file mode 100644
index 000000000000..2788bdda69ec
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Huaqin Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+#include <linux/err.h>
+
+struct dsi_cmd_desc {
+	char wait;
+	char cmd;
+	char len;
+	char *payload;
+};
+
+struct dsi_panel_cmds {
+	char *buf;
+	int blen;
+	struct dsi_cmd_desc *cmds;
+	int cmd_cnt;
+};
+
+struct panel_info {
+	struct drm_panel base;
+	struct mipi_dsi_device *link;
+
+	struct backlight_device *backlight;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *pp33000_gpio;
+	struct gpio_desc *pp18000_gpio;
+
+	u32 rst_seq[10];
+	u32 rst_seq_len;
+
+	struct dsi_panel_cmds *on_cmds;
+	struct dsi_panel_cmds *off_cmds;
+	struct drm_display_mode	*panel_display_mode;
+
+	unsigned int panel_width_mm;
+	unsigned int panel_height_mm;
+	unsigned int per_color_channel;
+
+	bool prepared;
+	bool enabled;
+};
+
+static int dsi_parse_reset_seq(struct device_node *np, u32 rst_seq[10],
+		u32 *rst_len, const char *name)
+{
+	int num = 0, i;
+	int rc;
+	struct property *data;
+	u32 tmp[10];
+	*rst_len = 0;
+	data = of_find_property(np, name, &num);
+
+	num /= sizeof(u32);
+	if (!data || !num || num > 10 || num % 2) {
+		pr_err("%s:%d, error reading %s, length found = %d\n",
+				__func__, __LINE__, name, num);
+		return -EINVAL;
+	}
+
+	rc = of_property_read_u32_array(np, name, tmp, num);
+	if (rc) {
+		pr_err("%s:%d, error reading %s, rc = %d\n",
+					__func__, __LINE__, name, rc);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num; ++i) {
+		rst_seq[i] = tmp[i];
+		*rst_len = num;
+	}
+	return 0;
+}
+
+ssize_t mipi_dsi_dcs_write_delay(struct mipi_dsi_device *dsi, u8 cmd,
+		const void *data, size_t len, size_t time)
+{
+	ssize_t ret;
+
+	if (len == 0)
+		ret = mipi_dsi_dcs_write(dsi, cmd, NULL, 0);
+	else
+		ret = mipi_dsi_dcs_write(dsi, cmd, data, len);
+
+	msleep(time);
+
+	return ret;
+}
+
+static int write_cmds(struct mipi_dsi_device *dsi_device,
+					struct dsi_panel_cmds *init_cmds)
+{
+	struct dsi_cmd_desc *one_cmd = init_cmds->cmds;
+	int i = 0;
+	int ret;
+
+	for (i = 0; i < init_cmds->cmd_cnt; i++) {
+		if (one_cmd == NULL)
+			return -EINVAL;
+
+		ret = mipi_dsi_dcs_write_delay(dsi_device,
+				one_cmd->cmd, one_cmd->payload,
+				one_cmd->len, one_cmd->wait);
+		one_cmd++;
+	}
+
+	return ret;
+}
+
+static int parse_dcs_cmds(struct device_node *np,
+				struct dsi_panel_cmds *pcmds, char *cmd_key)
+{
+	const char *data;
+	int blen = 0, len, cnt = 0;
+	char *buf, *bp;
+	struct dsi_cmd_desc *temp_cmd;
+
+	data = of_get_property(np, cmd_key, &blen);
+	if (!data) {
+		pr_err("%s: failed, key=%s\n", __func__, cmd_key);
+		return -ENOMEM;
+	}
+
+	buf = kzalloc(sizeof(char) * blen, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf, data, blen);
+
+	/* scan dcs commands */
+	bp = buf;
+	len = blen;
+
+	/* get how much cmd cnt  */
+	while (len > 0) {
+		cnt++;
+		len = len - *(bp);
+		bp = bp + *(bp);
+	}
+
+	pcmds->cmd_cnt = cnt;
+
+	pcmds->cmds = kcalloc(cnt, sizeof(struct dsi_cmd_desc), GFP_KERNEL);
+	if (!pcmds->cmds)
+		return -ENOMEM;
+	temp_cmd = pcmds->cmds;
+
+	bp = buf;
+	len = blen;
+
+	while (cnt != 0) {
+		temp_cmd->wait = *(bp+1);
+		temp_cmd->cmd = *(bp+2);
+		temp_cmd->len = *(bp) - 3;
+		temp_cmd->payload = bp + 3;
+
+		cnt--;
+		temp_cmd++;
+		bp = bp + *(bp);
+	}
+
+	pcmds->buf = buf;
+	pcmds->blen = blen;
+
+	return 0;
+}
+
+static int panel_parse_dt(struct panel_info *pinfo)
+{
+	struct device_node *panels_node;
+	struct device_node *parameter_node;
+	static const char *lcd_name;
+	static const char *panel_parameter;
+	struct drm_display_mode *display_mode;
+	struct mipi_dsi_device	*dsi_device = pinfo->link;
+	int ret = 0;
+	u32	tmp;
+
+	panels_node = of_find_node_by_name(NULL, "panels");
+	if (!panels_node) {
+		pr_err("Get panels node Fail!\n");
+		return -EINVAL;
+	}
+
+	panel_parameter = of_get_property(panels_node, "panel-parameter", NULL);
+	if (!panel_parameter) {
+		pr_err("Get panel parameter Fail!\n");
+		return -EINVAL;
+	}
+
+	parameter_node = of_find_node_by_name(panels_node, panel_parameter);
+	if (!parameter_node)
+		return -ENODEV;
+
+	/* get lcd name */
+	lcd_name = of_get_property(parameter_node, "dsi-panel-name", NULL);
+	if (!lcd_name) {
+		pr_err("Get lcd_name Fail!\n");
+		return -EINVAL;
+	}
+	pr_info("%s: Lcd Name = %s\n", __func__, lcd_name);
+
+	/* get lcd init code */
+	pinfo->on_cmds = kzalloc(sizeof(struct dsi_panel_cmds), GFP_KERNEL);
+	if (!(pinfo->on_cmds))
+		return -ENOMEM;
+
+	ret = parse_dcs_cmds(parameter_node, pinfo->on_cmds, "dsi-on-command");
+	if (ret < 0) {
+		pr_err("Get Dsi on command Fail\n");
+		return -EINVAL;
+	}
+
+	/* get lcd off code */
+	pinfo->off_cmds = kzalloc(sizeof(struct dsi_panel_cmds), GFP_KERNEL);
+	if (!(pinfo->off_cmds))
+		return -ENOMEM;
+
+	ret = parse_dcs_cmds(parameter_node, pinfo->off_cmds,
+			"dsi-off-command");
+	if (ret < 0) {
+		pr_err("Get Dsi off command Fail\n");
+		return -EINVAL;
+	}
+
+	/* get Porch  */
+	display_mode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL);
+	if (!display_mode)
+		return -ENOMEM;
+	pinfo->panel_display_mode = display_mode;
+
+	ret = of_property_read_u32(parameter_node, "dsi-pixel-clk", &tmp);
+	display_mode->clock = (!ret ? tmp : 0);
+
+	ret = of_property_read_u32(parameter_node,
+			"dsi-panel-hzorizontal", &tmp);
+	display_mode->hdisplay = (!ret ? tmp : 0);
+
+	ret = of_property_read_u32(parameter_node, "dsi-h-front-porch", &tmp);
+	tmp = (!ret ? tmp : 0);
+	display_mode->hsync_start = display_mode->hdisplay + tmp;
+
+	ret = of_property_read_u32(parameter_node, "dsi-h-back-porch", &tmp);
+	tmp = (!ret ? tmp : 0);
+	display_mode->hsync_end = display_mode->hsync_start + tmp;
+
+	ret = of_property_read_u32(parameter_node, "dsi-h-pulse-width", &tmp);
+	tmp = (!ret ? tmp : 0);
+	display_mode->htotal = display_mode->hsync_end + tmp;
+
+	ret = of_property_read_u32(parameter_node, "dsi-panel-vertical", &tmp);
+	display_mode->vdisplay = (!ret ? tmp : 0);
+
+	ret = of_property_read_u32(parameter_node, "dsi-v-front-porch", &tmp);
+	tmp = (!ret ? tmp : 0);
+	display_mode->vsync_start = display_mode->vdisplay + tmp;
+
+	ret = of_property_read_u32(parameter_node, "dsi-v-back-porch", &tmp);
+	tmp = (!ret ? tmp : 0);
+	display_mode->vsync_end = display_mode->vsync_start + tmp;
+
+	ret = of_property_read_u32(parameter_node, "dsi-v-pulse-width", &tmp);
+	tmp = (!ret ? tmp : 0);
+	display_mode->vtotal = display_mode->vsync_end + tmp;
+
+	ret = of_property_read_u32(parameter_node, "dsi-panel-refresh", &tmp);
+	display_mode->vrefresh = (!ret ? tmp : 0);
+
+	/* get lans */
+	ret = of_property_read_u32(parameter_node, "dsi-panel-lanes", &tmp);
+	dsi_device->lanes  = (!ret ? tmp : 0);
+
+	ret = of_property_read_u32(parameter_node, "dsi-panel-format", &tmp);
+	dsi_device->format = (!ret ? tmp : 0);
+
+	ret = of_property_read_u32(parameter_node,
+			"dsi-panel-mode-flags", &tmp);
+	dsi_device->mode_flags = (!ret ? tmp : 0);
+
+	/* get WxH */
+	ret = of_property_read_u32(parameter_node, "dsi-panel-width-mm", &tmp);
+	pinfo->panel_width_mm  = (!ret ? tmp : 0);
+
+	ret = of_property_read_u32(parameter_node, "dsi-panel-height-mm", &tmp);
+	pinfo->panel_height_mm  = (!ret ? tmp : 0);
+
+	ret = of_property_read_u32(parameter_node, "per-color-channel", &tmp);
+	pinfo->per_color_channel = (!ret ? tmp : 0);
+
+	/* reset time */
+	ret = dsi_parse_reset_seq(parameter_node, pinfo->rst_seq,
+				&(pinfo->rst_seq_len), "dsi-reset-sequence");
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static inline struct panel_info *to_panel_info(struct drm_panel *panel)
+{
+	return container_of(panel, struct panel_info, base);
+}
+
+static int panel_disable(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+
+	if (!pinfo->enabled)
+		return 0;
+
+	backlight_disable(pinfo->backlight);
+
+	pinfo->enabled = false;
+
+	return 0;
+}
+
+static int panel_unprepare(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+	int err;
+
+	if (!pinfo->prepared)
+		return 0;
+
+	err = write_cmds(pinfo->link, pinfo->off_cmds);
+	if (err < 0) {
+		dev_err(panel->dev,
+				"failed to send DCS Off Code: %d\n", err);
+		return err;
+	}
+
+	usleep_range(1000, 1000);
+	gpiod_set_value_cansleep(pinfo->reset_gpio, 0);
+	gpiod_set_value_cansleep(pinfo->pp33000_gpio, 0);
+	gpiod_set_value_cansleep(pinfo->pp18000_gpio, 0);
+
+	pinfo->prepared = false;
+
+	return 0;
+}
+
+static int panel_prepare(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+	int err, i;
+
+	if (pinfo->prepared)
+		return 0;
+
+	gpiod_set_value_cansleep(pinfo->pp18000_gpio, 1);
+	gpiod_set_value_cansleep(pinfo->pp33000_gpio, 1);
+
+	/* reset sequence */
+	for (i = 0; i < pinfo->rst_seq_len; ++i) {
+		gpiod_set_value_cansleep(pinfo->reset_gpio, pinfo->rst_seq[i]);
+		if (pinfo->rst_seq[++i])
+			usleep_range(pinfo->rst_seq[i] * 1000,
+						pinfo->rst_seq[i] * 1000);
+	}
+
+	/* send init code */
+	err = write_cmds(pinfo->link, pinfo->on_cmds);
+	if (err < 0) {
+		dev_err(panel->dev,
+				"failed to send DCS Init Code: %d\n", err);
+		goto poweroff;
+	}
+
+	pinfo->prepared = true;
+
+	return 0;
+
+poweroff:
+	gpiod_set_value_cansleep(pinfo->reset_gpio, 0);
+	gpiod_set_value_cansleep(pinfo->pp33000_gpio, 0);
+	gpiod_set_value_cansleep(pinfo->pp18000_gpio, 0);
+	return err;
+}
+
+static int panel_enable(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+	int ret;
+
+	if (pinfo->enabled)
+		return 0;
+
+	ret = backlight_enable(pinfo->backlight);
+	if (ret) {
+		DRM_DEV_ERROR(panel->drm->dev,
+			      "Failed to enable backlight %d\n", ret);
+		return ret;
+	}
+
+	pinfo->enabled = true;
+
+	return 0;
+}
+
+static int panel_get_modes(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+	struct drm_display_mode *mode;
+
+	if (!pinfo->panel_display_mode) {
+		pr_err("Get panel_display_mode fail!\n");
+		return -1;
+	}
+
+	mode = drm_mode_duplicate(panel->drm, pinfo->panel_display_mode);
+	if (!mode) {
+		pr_err("failed to add mode\n");
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	drm_mode_probed_add(panel->connector, mode);
+
+	panel->connector->display_info.width_mm = pinfo->panel_width_mm;
+	panel->connector->display_info.height_mm = pinfo->panel_height_mm;
+	panel->connector->display_info.bpc = pinfo->per_color_channel;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs panel_funcs = {
+	.disable = panel_disable,
+	.unprepare = panel_unprepare,
+	.prepare = panel_prepare,
+	.enable = panel_enable,
+	.get_modes = panel_get_modes,
+};
+
+static const struct of_device_id panel_of_match[] = {
+	{ .compatible = "boe,himax8279d", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, panel_of_match);
+
+static int panel_add(struct panel_info *pinfo)
+{
+	struct device *dev = &pinfo->link->dev;
+	struct device_node *np;
+	int err;
+
+	pinfo->pp33000_gpio = devm_gpiod_get_optional(dev,
+							"pp33000",
+							GPIOD_OUT_HIGH);
+	if (IS_ERR(pinfo->pp33000_gpio)) {
+		err = PTR_ERR(pinfo->pp33000_gpio);
+		dev_err(dev, "failed to get pp33000 gpio: %d\n", err);
+		pinfo->pp33000_gpio = NULL;
+	}
+
+	pinfo->pp18000_gpio = devm_gpiod_get_optional(dev,
+							"pp18000",
+							GPIOD_OUT_HIGH);
+	if (IS_ERR(pinfo->pp18000_gpio)) {
+		err = PTR_ERR(pinfo->pp18000_gpio);
+		dev_err(dev, "failed to get pp18000 gpio: %d\n", err);
+		pinfo->pp18000_gpio = NULL;
+	}
+
+	pinfo->reset_gpio = devm_gpiod_get_optional(dev, "enable",
+							GPIOD_OUT_HIGH);
+	if (IS_ERR(pinfo->reset_gpio)) {
+		err = PTR_ERR(pinfo->reset_gpio);
+		dev_err(dev, "failed to get enable gpio: %d\n", err);
+		pinfo->reset_gpio = NULL;
+	}
+
+	np = of_parse_phandle(dev->of_node, "backlight", 0);
+	if (np) {
+		pinfo->backlight = of_find_backlight_by_node(np);
+		of_node_put(np);
+
+		if (!pinfo->backlight)
+			return -EPROBE_DEFER;
+	}
+
+	drm_panel_init(&pinfo->base);
+	pinfo->base.funcs = &panel_funcs;
+	pinfo->base.dev = &pinfo->link->dev;
+
+	err = drm_panel_add(&pinfo->base);
+	if (err < 0)
+		goto put_backlight;
+
+	return 0;
+
+put_backlight:
+	put_device(&pinfo->backlight->dev);
+
+	return err;
+}
+
+static void panel_del(struct panel_info *pinfo)
+{
+	if (pinfo->base.dev)
+		drm_panel_remove(&pinfo->base);
+
+	put_device(&pinfo->backlight->dev);
+}
+
+static int panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct panel_info *pinfo;
+	int err;
+
+	pinfo = devm_kzalloc(&dsi->dev, sizeof(*pinfo), GFP_KERNEL);
+	if (!pinfo)
+		return -ENOMEM;
+
+	pinfo->link = dsi;
+	panel_parse_dt(pinfo);
+	mipi_dsi_set_drvdata(dsi, pinfo);
+
+	err = panel_add(pinfo);
+	if (err < 0)
+		return err;
+
+	return mipi_dsi_attach(dsi);
+}
+
+static int panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi);
+	int err;
+
+	err = panel_unprepare(&pinfo->base);
+	if (err < 0)
+		DRM_DEV_ERROR(&dsi->dev, "failed to unprepare panel: %d\n",
+			      err);
+
+	err = panel_disable(&pinfo->base);
+	if (err < 0)
+		DRM_DEV_ERROR(&dsi->dev, "failed to disable panel: %d\n", err);
+
+	err = mipi_dsi_detach(dsi);
+	if (err < 0)
+		DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
+			      err);
+
+	drm_panel_detach(&pinfo->base);
+	panel_del(pinfo);
+
+	return 0;
+}
+
+static void panel_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi);
+
+	panel_unprepare(&pinfo->base);
+	panel_disable(&pinfo->base);
+}
+
+static struct mipi_dsi_driver panel_driver = {
+	.driver = {
+		.name = "panel-innolux-ota7290b",
+		.of_match_table = panel_of_match,
+	},
+	.probe = panel_probe,
+	.remove = panel_remove,
+	.shutdown = panel_shutdown,
+};
+module_mipi_dsi_driver(panel_driver);
+
+MODULE_AUTHOR("Jerry Han <hanxu5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Boe Himax8279d driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux