From: David Francis <David.Francis@xxxxxxx>
Instead of having drm_dp_dpcd_read/write and
drm_dp_mst_dpcd_read/write as entry points into the
aux code, have drm_dp_dpcd_read/write handle both.
This means that DRM drivers can make MST DPCD read/writes.
v2: Fix spacing
v3: Dump dpcd access on MST read/writes
Reviewed-by: Lyude Paul <lyude@xxxxxxxxxx>
Reviewed-by: Harry Wentland <harry.wentland@xxxxxxx>
Signed-off-by: David Francis <David.Francis@xxxxxxx>
---
drivers/gpu/drm/drm_dp_aux_dev.c | 12 ++----------
drivers/gpu/drm/drm_dp_helper.c | 30 ++++++++++++++++++++----------
2 files changed, 22 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_aux_dev.c b/drivers/gpu/drm/drm_dp_aux_dev.c
index 00610bd8d6c1..0780fc358389 100644
--- a/drivers/gpu/drm/drm_dp_aux_dev.c
+++ b/drivers/gpu/drm/drm_dp_aux_dev.c
@@ -162,11 +162,7 @@ static ssize_t auxdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
break;
}
- if (aux_dev->aux->is_remote)
- res = drm_dp_mst_dpcd_read(aux_dev->aux, pos, buf,
- todo);
- else
- res = drm_dp_dpcd_read(aux_dev->aux, pos, buf, todo);
+ res = drm_dp_dpcd_read(aux_dev->aux, pos, buf, todo);
if (res <= 0)
break;
@@ -214,11 +210,7 @@ static ssize_t auxdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
break;
}
- if (aux_dev->aux->is_remote)
- res = drm_dp_mst_dpcd_write(aux_dev->aux, pos, buf,
- todo);
- else
- res = drm_dp_dpcd_write(aux_dev->aux, pos, buf, todo);
+ res = drm_dp_mst_dpcd_write(aux_dev->aux, pos, buf, todo);
if (res <= 0)
break;
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 54a6414c5d96..0cbf10727bd6 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -29,6 +29,7 @@
#include <linux/i2c.h>
#include <linux/seq_file.h>
#include <drm/drm_dp_helper.h>
+#include <drm/drm_dp_mst_helper.h>
#include <drm/drmP.h>
#include "drm_crtc_helper_internal.h"
@@ -272,7 +273,7 @@ static int drm_dp_dpcd_access(struct drm_dp_aux *aux, u8 request,
/**
* drm_dp_dpcd_read() - read a series of bytes from the DPCD
- * @aux: DisplayPort AUX channel
+ * @aux: DisplayPort AUX channel (SST or MST)
* @offset: address of the (first) register to read
* @buffer: buffer to store the register values
* @size: number of bytes in @buffer
@@ -301,13 +302,18 @@ ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
* We just have to do it before any DPCD access and hope that the
* monitor doesn't power down exactly after the throw away read.
*/
- ret = drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, DP_DPCD_REV, buffer,
- 1);
- if (ret != 1)
- goto out;
+ if (!aux->is_remote) {
+ ret = drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, DP_DPCD_REV,
+ buffer, 1);
+ if (ret != 1)
+ goto out;
+ }
- ret = drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, offset, buffer,
- size);
+ if (aux->is_remote)
+ ret = drm_dp_mst_dpcd_read(aux, offset, buffer, size);
+ else
+ ret = drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, offset,
+ buffer, size);
out:
drm_dp_dump_access(aux, DP_AUX_NATIVE_READ, offset, buffer, ret);
@@ -317,7 +323,7 @@ EXPORT_SYMBOL(drm_dp_dpcd_read);
/**
* drm_dp_dpcd_write() - write a series of bytes to the DPCD
- * @aux: DisplayPort AUX channel
+ * @aux: DisplayPort AUX channel (SST or MST)
* @offset: address of the (first) register to write
* @buffer: buffer containing the values to write
* @size: number of bytes in @buffer
@@ -334,8 +340,12 @@ ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset,
{
int ret;
- ret = drm_dp_dpcd_access(aux, DP_AUX_NATIVE_WRITE, offset, buffer,
- size);
+ if (aux->is_remote)
+ ret = drm_dp_mst_dpcd_write(aux, offset, buffer, size);
+ else
+ ret = drm_dp_dpcd_access(aux, DP_AUX_NATIVE_WRITE, offset,
+ buffer, size);
+
drm_dp_dump_access(aux, DP_AUX_NATIVE_WRITE, offset, buffer, ret);
return ret;
}
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
