Andreas
On 9/11/19 5:08 AM, Daniel Thompson wrote:
On Tue, Sep 10, 2019 at 11:29:08PM +0200, Andreas Kemnade wrote:
add enable-gpios to describe HWEN pin
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
---
changes in v2: add example
.../bindings/leds/backlight/lm3630a-backlight.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index dc129d9a329e..1fa83feffe16 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -29,6 +29,10 @@ properties:
'#size-cells':
const: 0
+ enable-gpios:
+ description: GPIO to use to enable/disable the backlight (HWEN pin).
+ maxItems: 1
+
required:
- compatible
- reg
@@ -92,6 +96,7 @@ examples:
i2c {
#address-cells = <1>;
#size-cells = <0>;
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
This is in the wrong place. This is implying that the gpio is for the
i2c parent
This needs to go under the led-controller node below
Dan
led-controller@38 {
compatible = "ti,lm3630a";
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
