Re: [PATCH v4 9/9] arm64: dts: renesas: Add CMM units to Gen3 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On 06/09/2019 14:54, Jacopo Mondi wrote:
> Add CMM units to Renesas R-Car Gen3 SoC that support it, and reference them
> from the Display Unit they are connected to.
> 
> Sort the 'vsps' and 'renesas,cmm' entries in the DU unit consistently
> in all the involved DTS.

I think if you chose the ordering in the r8a7795, then you only have to
adjust/correct the ordering in the r8a7796 and r8a77965 ...

Especially as you haven't changed the ordering of r8a77970, and r8a77980
which have the status after the vsps entry.


> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi  | 40 ++++++++++++++++++++++-
>  arch/arm64/boot/dts/renesas/r8a7796.dtsi  | 28 ++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a77965.dtsi | 28 ++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a77990.dtsi | 22 ++++++++++++-
>  arch/arm64/boot/dts/renesas/r8a77995.dtsi | 22 ++++++++++++-
>  5 files changed, 137 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> index 6675462f7585..67c242a447bc 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -2939,6 +2939,42 @@
>  			iommus = <&ipmmu_vi1 10>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a7795-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a7795-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
> +		cmm2: cmm@fea60000 {
> +			compatible = "renesas,r8a7795-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea60000 0 0x1000>;
> +			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 709>;
> +			resets = <&cpg 709>;
> +		};
> +
> +		cmm3: cmm@fea70000 {
> +			compatible = "renesas,r8a7795-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea70000 0 0x1000>;
> +			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 708>;
> +			resets = <&cpg 708>;
> +		};
> +
>  		csi20: csi2@fea80000 {
>  			compatible = "renesas,r8a7795-csi2";
>  			reg = <0 0xfea80000 0 0x10000>;
> @@ -3142,9 +3178,11 @@
>  				 <&cpg CPG_MOD 722>,
>  				 <&cpg CPG_MOD 721>;
>  			clock-names = "du.0", "du.1", "du.2", "du.3";
> -			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
>  			status = "disabled";

I'm not sure the vsps should be below the status = disabled line.

I'd have this as:

	clock-names...
	vsps...
	renesas,cmms...
		<blank line>
	status...
		<blank line>
	ports...

>  
> +			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
> +			renesas,cmms = <&cmm0 &cmm1 &cmm2 &cmm3>;

I think these should be separated by comma's to show they are separate
references, or references to separate phandles or such.

The only precedence I could find was in pmu_a53:

          interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;


> +
>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> index 822c96601d3c..837c3b2da773 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> @@ -2641,6 +2641,33 @@
>  			renesas,fcp = <&fcpvi0>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a7796-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a7796-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
> +		cmm2: cmm@fea60000 {
> +			compatible = "renesas,r8a7796-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea60000 0 0x1000>;
> +			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 709>;
> +			resets = <&cpg 709>;
> +		};
> +
>  		csi20: csi2@fea80000 {
>  			compatible = "renesas,r8a7796-csi2";
>  			reg = <0 0xfea80000 0 0x10000>;
> @@ -2794,6 +2821,7 @@
>  			status = "disabled";
>  
>  			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
> +			renesas,cmms = <&cmm0 &cmm1 &cmm2>;

Aha, yes, I'd move this vsps rather than the one at r8a7795, which I'd
consider to be more 'correct'.


>  
>  			ports {
>  				#address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> index 4ae163220f60..c7635e8b261c 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> @@ -2320,6 +2320,33 @@
>  			resets = <&cpg 611>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a77965-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a77965-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
> +		cmm3: cmm@fea70000 {
> +			compatible = "renesas,r8a77965-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea70000 0 0x1000>;
> +			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 708>;
> +			resets = <&cpg 708>;
> +		};
> +
>  		csi20: csi2@fea80000 {
>  			compatible = "renesas,r8a77965-csi2";
>  			reg = <0 0xfea80000 0 0x10000>;
> @@ -2470,6 +2497,7 @@
>  			status = "disabled";
>  
>  			vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
> +			renesas,cmms = <&cmm0 &cmm1 &cmm3>;

Again, I'd consider this the wrong sort order, due to the status'
importance. I wouldn't hide it in the middle.

>  
>  			ports {
>  				#address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> index 455954c3d98e..5e3d758a033f 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> @@ -1727,6 +1727,24 @@
>  			iommus = <&ipmmu_vi0 9>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a77990-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a77990-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
>  		csi40: csi2@feaa0000 {
>  			compatible = "renesas,r8a77990-csi2";
>  			reg = <0 0xfeaa0000 0 0x10000>;
> @@ -1768,9 +1786,11 @@
>  			clock-names = "du.0", "du.1";
>  			resets = <&cpg 724>;
>  			reset-names = "du.0";
> -			vsps = <&vspd0 0>, <&vspd1 0>;
>  			status = "disabled";
>  
> +			vsps = <&vspd0 0>, <&vspd1 0>;
> +			renesas,cmms = <&cmm0 &cmm1>;


Same ... :D

> +
>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> index 183fef86cf7c..6838a81f5caa 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> @@ -993,6 +993,24 @@
>  			iommus = <&ipmmu_vi0 9>;
>  		};
>  
> +		cmm0: cmm@fea40000 {
> +			compatible = "renesas,r8a77995-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea40000 0 0x1000>;
> +			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 711>;
> +			resets = <&cpg 711>;
> +		};
> +
> +		cmm1: cmm@fea50000 {
> +			compatible = "renesas,r8a77995-cmm",
> +				     "renesas,rcar-gen3-cmm";
> +			reg = <0 0xfea50000 0 0x1000>;
> +			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> +			clocks = <&cpg CPG_MOD 710>;
> +			resets = <&cpg 710>;
> +		};
> +
>  		du: display@feb00000 {
>  			compatible = "renesas,du-r8a77995";
>  			reg = <0 0xfeb00000 0 0x40000>;
> @@ -1003,9 +1021,11 @@
>  			clock-names = "du.0", "du.1";
>  			resets = <&cpg 724>;
>  			reset-names = "du.0";
> -			vsps = <&vspd0 0>, <&vspd1 0>;
>  			status = "disabled";
>  
> +			vsps = <&vspd0 0>, <&vspd1 0>;
> +			renesas,cmms = <&cmm0 &cmm1>;
> +

Same.

>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux