The Xylon LogiCVC is a display controller implemented as programmable
logic in Xilinx FPGAs.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
---
.../bindings/display/xylon,logicvc.txt | 188 ++++++++++++++++++
1 file changed, 188 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/xylon,logicvc.txt
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc.txt b/Documentation/devicetree/bindings/display/xylon,logicvc.txt
new file mode 100644
index 000000000000..eb4b1553888a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xylon,logicvc.txt
@@ -0,0 +1,188 @@
+Xylon LogiCVC display controller
+
+The Xylon LogiCVC is a display controller that supports multiple layers.
+It is usually implemented as programmable logic and was optimized for use
+with Xilinx Zynq-7000 SoCs and Xilinx FPGAs.
+
+Because the controller is intended for use in a FPGA, most of the configuration
+of the controller takes place at logic configuration bitstream synthesis time.
+As a result, many of the device-tree bindings are meant to reflect the
+synthesis configuration. These do not allow configuring the controller
+differently than synthesis configuration.
+
+Layers are declared in the "layers" sub-node and have dedicated configuration.
+In version 3 of the controller, each layer has fixed memory offset and address
+starting from the video memory base address for its framebuffer. With version 4,
+framebuffers are configured with a direct memory address instead.
+
+Matching synthesis parameters are provided when applicable.
+
+Required properties:
+- compatible: Should be one of:
+ "xylon,logicvc-3.02.a-display"
+ "xylon,logicvc-4.01.a-display"
+- reg: Physical base address and size for the controller registers.
+- clocks: List of phandle and clock-specifier pairs, one for each entry
+ in 'clock-names'
+- clock-names: List of clock names that should at least contain:
+ - "vclk": The VCLK video clock input.
+- interrupts: The interrupt to use for VBLANK signaling.
+- xylon,display-interface: Display interface in use, should be one of:
+ - "lvds-4bits": 4-bit LVDS interface (C_DISPLAY_INTERFACE == 4).
+- xylon,display-colorspace: Display output colorspace in use, should be one of:
+ - "rgb": RGB colorspace (C_DISPLAY_COLOR_SPACE == 0).
+- xylon,display-depth: Display output depth in use (C_PIXEL_DATA_WIDTH).
+- xylon,row-stride: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
+- xylon,layers-count: The number of available layers (C_NUM_OF_LAYERS).
+
+Optional properties:
+- memory-region: phandle to a node describing memory, as specified in:
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+- clock-names: List of clock names that can optionally contain:
+ - "vclk2": The VCLK2 doubled-rate video clock input.
+ - "lvdsclk": The LVDS clock.
+ - "lvdsclkn": The LVDS clock inverted.
+- xylon,syscon: Syscon phandle representing the logicvc instance.
+- xylon,dithering: Dithering module is enabled (C_XCOLOR).
+- xylon,background-layer: The last layer is used to display a black background
+ (C_USE_BACKGROUND). It must still be registered.
+- xylon,layers-configurable: Configuration of layers' size, position and offset
+ is enabled (C_USE_SIZE_POSITION).
+
+Required sub-nodes:
+- layers: The description of the display controller layers, containing layer
+ sub-nodes that each describe a registered layer.
+- ports: The LogiCVC connection to an encoder input port. The connection
+ is modeled using the OF graph bindings, as specified in:
+ Documentation/devicetree/bindings/graph.txt
+
+Required layer properties:
+- reg: Layer index (from front to back, starting at 0).
+- xylon,layer-depth: Layer depth in use (C_LAYER_0_DATA_WIDTH).
+- xylon,layer-colorspace: Layer colorspace in use, should be one of:
+ - "rgb": RGB colorspace (C_LAYER_*_TYPE == 0).
+- xylon,layer-alpha-mode: Alpha mode for the layer, should be one of:
+ - "layer": Alpha is configured layer-wide (C_LAYER_*_ALPHA_MODE == 0).
+ - "pixel": Alpha is configured per-pixel (C_LAYER_*_ALPHA_MODE == 1).
+- xylon,layer-base-offset: offset in number of lines (C_LAYER_*_OFFSET) starting
+ from the video RAM base (C_VMEM_BASEADDR), only for version 3.
+- xylon,layer-buffer-offset: offset in number of lines (C_BUFFER_*_OFFSET)
+ starting from the layer base offset for the second buffer used in
+ double-buffering.
+
+Optional layer properties:
+- xylon,layer-primary: Layer should be registered as a primary plane (exactly
+ one is required).
+
+Example:
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ logicvc_cma: cma@1f800000 {
+ compatible = "shared-dma-pool";
+ size = <0x800000>;
+ alloc-ranges = <0x1f800000 0x800000>;
+ reusable;
+ };
+ };
+
+ logicvc: logicvc@43c00000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x43c00000 0x6000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ logicvc_display: display-engine@0 {
+ compatible = "xylon,logicvc-3.02.a-display";
+ reg = <0x0 0x6000>;
+ memory-region = <&logicvc_cma>;
+
+ clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>;
+ clock-names = "vclk", "lvdsclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+ xylon,syscon = <&logicvc>;
+
+ xylon,display-interface = "lvds-4bits";
+ xylon,display-colorspace = "rgb";
+ xylon,display-depth = <16>;
+ xylon,row-stride = <1024>;
+
+ xylon,layers-configurable;
+ xylon,layers-count = <5>;
+
+ layers {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ layer@0 {
+ reg = <0>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <0>;
+ xylon,layer-buffer-offset = <480>;
+ xylon,layer-primary;
+ };
+
+ layer@1 {
+ reg = <1>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <2400>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer@2 {
+ reg = <2>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <960>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer@3 {
+ reg = <3>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <480>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer@4 {
+ reg = <4>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <8192>;
+ xylon,layer-buffer-offset = <480>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ logicvc_out: port@1 {
+ reg = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ logicvc_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+ };
+ };
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
