Re: [PATCH] drm/panfrost: Fix regulator_get_optional() misuse

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/09/2019 13:30, Mark Brown wrote:
> The panfrost driver requests a supply using regulator_get_optional()
> but both the name of the supply and the usage pattern suggest that it is
> being used for the main power for the device and is not at all optional
> for the device for function, there is no meaningful handling for absent
> supplies.  Such regulators should use the vanilla regulator_get()
> interface, it will ensure that even if a supply is not described in the
> system integration one will be provided in software.
> 
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>

Tested-by: Steven Price <steven.price@xxxxxxx>

Looks like my approach to this was wrong - so we should also revert the
changes I made previously.

----8<----
>From fe20f8abcde8444bb41a8f72fb35de943a27ec5c Mon Sep 17 00:00:00 2001
From: Steven Price <steven.price@xxxxxxx>
Date: Fri, 6 Sep 2019 15:20:53 +0100
Subject: [PATCH] drm/panfrost: Revert changes to cope with NULL regulator

Handling a NULL return from devm_regulator_get_optional() doesn't seem
like the correct way of handling this. Instead revert the changes in
favour of switching to using devm_regulator_get() which will return a
dummy regulator instead.

Reverts commit 52282163dfa6 ("drm/panfrost: Add missing check for pfdev->regulator")
Reverts commit e21dd290881b ("drm/panfrost: Enable devfreq to work without regulator")

Signed-off-by: Steven Price <steven.price@xxxxxxx>
---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index a1f5fa6a742a..076983071e58 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -39,7 +39,7 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
 	 * If frequency scaling from low to high, adjust voltage first.
 	 * If frequency scaling from high to low, adjust frequency first.
 	 */
-	if (old_clk_rate < target_rate && pfdev->regulator) {
+	if (old_clk_rate < target_rate) {
 		err = regulator_set_voltage(pfdev->regulator, target_volt,
 					    target_volt);
 		if (err) {
@@ -53,14 +53,12 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
 	if (err) {
 		dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
 			err);
-		if (pfdev->regulator)
-			regulator_set_voltage(pfdev->regulator,
-					      pfdev->devfreq.cur_volt,
-					      pfdev->devfreq.cur_volt);
+		regulator_set_voltage(pfdev->regulator, pfdev->devfreq.cur_volt,
+				      pfdev->devfreq.cur_volt);
 		return err;
 	}
 
-	if (old_clk_rate > target_rate && pfdev->regulator) {
+	if (old_clk_rate > target_rate) {
 		err = regulator_set_voltage(pfdev->regulator, target_volt,
 					    target_volt);
 		if (err)
@@ -138,6 +136,9 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	int ret;
 	struct dev_pm_opp *opp;
 
+	if (!pfdev->regulator)
+		return 0;
+
 	ret = dev_pm_opp_of_add_table(&pfdev->pdev->dev);
 	if (ret == -ENODEV) /* Optional, continue without devfreq */
 		return 0;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux