On Wed, Sep 04, 2019 at 07:02:18PM +0000, Siqueira, Rodrigo wrote: > DP 1.4a specification defines Link Training Tunable PHY Repeater (LTTPR) A bunch of this stuff was already in DP 1.3 so the statement here (and in the comment) is a bit misleading. "LTTPR" is not a name that appears anywhere in the spec AFAICS, so calling it that is a bit confusing. > which is required to add support for systems with Thunderbolt or other > repeater devices. "required" seems a bit strong. IIRC by default these things should be in transparent mode so the DPTX can remain blissfully unaware of their presence. > > Changes since V3: > - Replace spaces by tabs > Changes since V2: > - Drop the kernel-doc comment > - Reorder LTTPR according to register offset > Changes since V1: > - Adjusts registers names to be aligned with spec and the rest of the > file > - Update spec comment from 1.4 to 1.4a > > Cc: Abdoulaye Berthe <Abdoulaye.Berthe@xxxxxxx> > Cc: Harry Wentland <harry.wentland@xxxxxxx> > Cc: Leo Li <sunpeng.li@xxxxxxx> > Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> > Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx> > Signed-off-by: Abdoulaye Berthe <Abdoulaye.Berthe@xxxxxxx> > Reviewed-by: Harry Wentland <Harry.Wentland@xxxxxxx> > --- > include/drm/drm_dp_helper.h | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h > index 8364502f92cf..5abed96a1cb1 100644 > --- a/include/drm/drm_dp_helper.h > +++ b/include/drm/drm_dp_helper.h > @@ -966,6 +966,31 @@ > #define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET 0x69494 > #define DP_HDCP_2_2_REG_DBG_OFFSET 0x69518 > > +/* Link Training (LT)-tunable Physical Repeaters - DP 1.4a */ s/Physical/PHY/ to match the spec. > +#define DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 0xf0000 > +#define DP_MAX_LINK_RATE_PHY_REPEATER 0xf0001 > +#define DP_PHY_REPEATER_CNT 0xf0002 > +#define DP_PHY_REPEATER_MODE 0xf0003 > +#define DP_MAX_LANE_COUNT_PHY_REPEATER 0xf0004 > +#define DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT 0xf0005 The last two are DP 1.4a it seems. 0xf0004 was called Repeater_FEC_CAPABILITY in 1.4. But the spec doesn't say anything about the DPCD revision so I have no idea how you're supposed to decide which definition to use. DP 1.4a seems to have added FEC_CAPABILITY_PHY_REPEATER1 at 0xf0294. To replace the 1.4 Repeater_FEC_CAPABILITY I suppose. > +#define DP_TRAINING_PATTERN_SET_PHY_REPEATER1 0xf0010 > +#define DP_TRAINING_LANE0_SET_PHY_REPEATER1 0xf0011 > +#define DP_TRAINING_LANE1_SET_PHY_REPEATER1 0xf0012 > +#define DP_TRAINING_LANE2_SET_PHY_REPEATER1 0xf0013 > +#define DP_TRAINING_LANE3_SET_PHY_REPEATER1 0xf0014 > +#define DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1 0xf0020 > +#define DP_TRANSMITTER_CAPABILITY_PHY_REPEATER1 0xf0021 Above two are DP 1.4a. > +#define DP_LANE0_1_STATUS_PHY_REPEATER1 0xf0030 > +#define DP_LANE2_3_STATUS_PHY_REPEATER1 0xf0031 > +#define DP_LANE_ALIGN_STATUS_UPDATED_PHY_REPEATER1 0xf0032 > +#define DP_ADJUST_REQUEST_LANE0_1_PHY_REPEATER1 0xf0033 > +#define DP_ADJUST_REQUEST_LANE2_3_PHY_REPEATER1 0xf0034 > +#define DP_SYMBOL_ERROR_COUNT_LANE0_PHY_REPEATER1 0xf0035 > +#define DP_SYMBOL_ERROR_COUNT_LANE1_PHY_REPEATER1 0xf0037 > +#define DP_SYMBOL_ERROR_COUNT_LANE2_PHY_REPEATER1 0xf0039 > +#define DP_SYMBOL_ERROR_COUNT_LANE3_PHY_REPEATER1 0xf003b > +#define DP_FEC_STATUS_PHY_REPEATER1 0xf0290 This seems to have appared in DP 1.4. You skipped quite a few registers here. I guess those were deemed not important? > + > /* DP HDCP message start offsets in DPCD address space */ > #define DP_HDCP_2_2_AKE_INIT_OFFSET DP_HDCP_2_2_REG_RTX_OFFSET > #define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET DP_HDCP_2_2_REG_CERT_RX_OFFSET > -- > 2.23.0 -- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
