Re: [PATCH 4/7] drm/omap: Implement CTM property for CRTC using OVL managers CPR matrix

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/09/2019 14:11, Laurent Pinchart wrote:
> Hi Jyri,
> 
> On Wed, Sep 04, 2019 at 10:17:00AM +0300, Jyri Sarha wrote:
>> On 03/09/2019 18:24, Laurent Pinchart wrote:
>>> On Mon, Sep 02, 2019 at 03:53:56PM +0300, Tomi Valkeinen wrote:
>>>> From: Jyri Sarha <jsarha@xxxxxx>
>>>>
>>>> Implement CTM color management property for OMAP CRTC using DSS
>>>> overlay manager's Color Phase Rotation matrix. The CPR matrix does not
>>>> exactly match the CTM property documentation. On DSS the CPR matrix is
>>>> applied after gamma table look up. However, it seems stupid to add a
>>>> custom property just for that.
>>>
>>> In that case the DRM documentation should be updated to mention that
>>> both options are allowed.
>>
>> Ok, if that is alright. But if we do that, then I guess all the drivers
>> implementing CTM should document the point where it is applied in the
>> pipeline.
> 
> Whatever solution we end up picking, I think it should at least be
> discussed with a broader upstream audience and not just swept under the
> omapdrm carpet :-)
> 

I'll try to write something and send the next series to wider audience.
Let's see what jury says.

>>>> Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
>>>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
>>>> ---
>>>>  drivers/gpu/drm/omapdrm/omap_crtc.c | 39 +++++++++++++++++++++++++++--
>>>>  1 file changed, 37 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
>>>> index 3c5ddbf30e97..d63213dd7d83 100644
>>>> --- a/drivers/gpu/drm/omapdrm/omap_crtc.c
>>>> +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
>>>> @@ -391,6 +391,32 @@ static void omap_crtc_manual_display_update(struct work_struct *data)
>>>>  	}
>>>>  }
>>>>  
>>>> +static s16 omap_crtc_S31_32_to_s2_8(s64 coef)
>>>> +{
>>>> +	uint64_t sign_bit = 1ULL << 63;
>>>> +	uint64_t cbits = (uint64_t) coef;
>>>
>>> s/uint64_t/u64/ for both lines as we're dealing with kernel code. And
>>> there's no need for a space before coef.
>>>
>>>> +	s16 ret = clamp_val(((cbits & ~sign_bit) >> 24), 0, 0x1FF);
>>>> +
>>>> +	if (cbits & sign_bit)
>>>> +		ret = -ret;
>>>> +
>>>> +	return ret;
>>>
>>> Can't this be simplified to 
>>>
>>> 	s16 ret = (coef >> 24) & 0x1ff;
>>>
>>> 	return coef < 0 ? -ret : ret;
>>>
>>
>> No. Clamping is different thing. If the original value is greater than
>> what we can present with our 2 magnitude bit, we want to use the maximum
>> value, not something that we may have in the LSB end of bits. e.g if
>> user-space tries to set the value to 2.0 (= 0x200) we rather present it
>> as 1.996 (= 0x1FF) than 0.0 (= 0x000).
> 
> Of course, my bad.
> 
> Perhaps a stupid question, should we reject out of range values at
> atomic check time ?
> 

I've at least seen CSC matrices with 2.0 values, so I think we should
accept those and use clamping, but maybe we should reject CTMs with
values far bigger than what we can represent. Such matrices would hardly
work the way they were intended.

>>>> +}
>>>> +
>>>> +static void omap_crtc_cpr_coefs_from_ctm(const struct drm_color_ctm *ctm,
>>>> +					 struct omap_dss_cpr_coefs *cpr)
>>>> +{
>>>> +	cpr->rr = omap_crtc_S31_32_to_s2_8(ctm->matrix[0]);
>>>> +	cpr->rg = omap_crtc_S31_32_to_s2_8(ctm->matrix[1]);
>>>> +	cpr->rb = omap_crtc_S31_32_to_s2_8(ctm->matrix[2]);
>>>> +	cpr->gr = omap_crtc_S31_32_to_s2_8(ctm->matrix[3]);
>>>> +	cpr->gg = omap_crtc_S31_32_to_s2_8(ctm->matrix[4]);
>>>> +	cpr->gb = omap_crtc_S31_32_to_s2_8(ctm->matrix[5]);
>>>> +	cpr->br = omap_crtc_S31_32_to_s2_8(ctm->matrix[6]);
>>>> +	cpr->bg = omap_crtc_S31_32_to_s2_8(ctm->matrix[7]);
>>>> +	cpr->bb = omap_crtc_S31_32_to_s2_8(ctm->matrix[8]);
>>>> +}
>>>> +
>>>>  static void omap_crtc_write_crtc_properties(struct drm_crtc *crtc)
>>>>  {
>>>>  	struct omap_drm_private *priv = crtc->dev->dev_private;
>>>> @@ -402,7 +428,16 @@ static void omap_crtc_write_crtc_properties(struct drm_crtc *crtc)
>>>>  	info.default_color = 0x000000;
>>>>  	info.trans_enabled = false;
>>>>  	info.partial_alpha_enabled = false;
>>>> -	info.cpr_enable = false;
>>>> +
>>>> +	if (crtc->state->ctm) {
>>>> +		struct drm_color_ctm *ctm =
>>>> +			(struct drm_color_ctm *) crtc->state->ctm->data;
>>>> +
>>>> +		info.cpr_enable = true;
>>>> +		omap_crtc_cpr_coefs_from_ctm(ctm, &info.cpr_coefs);
>>>
>>> As an optimisation it would be nice to only write the coefficients when
>>> they actually change. That could be implemented on top of this series.
>>
>> E.g. apply this ?
>>
>> - if (crtc->state->ctm)
>> + if (crtc->state->color_mgmt_changed && crtc->state->ctm)
> 
> Something like that, but .mgr_setup() should then be taught not to write
> unchanged CTM tables to registers. Do you think it would be worth it ?
> 

Hmmm, jess I should do it like this:
if (crtc->state->color_mgmt_changed) {
	if (crtc->state->ctm) {
...
>>>> +	} else {
>>>> +		info.cpr_enable = false;
>>>> +	}
}

This way the whole CPR functionality is turned off, if the there is no
CTM in the crtc state.

>>>>  
>>>>  	priv->dispc_ops->mgr_setup(priv->dispc, omap_crtc->channel, &info);
>>>>  }
>>>> @@ -836,7 +871,7 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
>>>>  	if (priv->dispc_ops->mgr_gamma_size(priv->dispc, channel)) {
>>>>  		unsigned int gamma_lut_size = 256;
>>>>  
>>>> -		drm_crtc_enable_color_mgmt(crtc, 0, false, gamma_lut_size);
>>>> +		drm_crtc_enable_color_mgmt(crtc, 0, true, gamma_lut_size);
>>>>  		drm_mode_crtc_set_gamma_size(crtc, gamma_lut_size);
>>>>  	}
>>>>  
> 


-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux