On Wed, Sep 04, 2019 at 05:09:29PM +0800, Cheng-yi Chiang wrote:
> Hi,
>
> On Tue, Sep 3, 2019 at 5:53 PM Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
> >
> > Hi,
> >
> > On 03/09/2019 07:51, Cheng-Yi Chiang wrote:
> > > From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> > >
> > > When transmitting IEC60985 linear PCM audio, we configure the
> > > Audio Sample Channel Status information of all the channel
> > > status bits in the IEC60958 frame.
> > > Refer to 60958-3 page 10 for frequency, original frequency, and
> > > wordlength setting.
> > >
> > > This fix the issue that audio does not come out on some monitors
> > > (e.g. LG 22CV241)
> > >
> > > Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> > > Signed-off-by: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 59 +++++++++++++++++++++++
> > > drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 20 ++++++++
> > > 2 files changed, 79 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > > index bd65d0479683..34d46e25d610 100644
> > > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > > @@ -582,6 +582,63 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
> > > return n;
> > > }
> > >
> > > +static void hdmi_set_schnl(struct dw_hdmi *hdmi)
> > > +{
> > > + u8 aud_schnl_samplerate;
> > > + u8 aud_schnl_8;
> > > +
> > > + /* These registers are on RK3288 using version 2.0a. */
> > > + if (hdmi->version != 0x200a)
> > > + return;
> >
> > Are these limited to the 2.0a version *in* RK3288, or 2.0a version on all
> > SoCs ?
> >
>
> In the original patch by Yakir,
>
> https://lore.kernel.org/patchwork/patch/539653/ (sorry, I should
> have added this link in the "after the cut" note)
>
> The fix is limited to version 2.0.
> Since I am only testing on RK3288 with 2.0a, I change the check to 2.0a only.
> I can not test 2.0a version on other SoCs.
> The databook I have at hand is 2.0a (not specific to RK3288) so I
> think all 2.0a should have this register.
>
> As for other version like version 1.3 on iMX6, there is no such
> register, as stated by Russell
>
> http://lkml.iu.edu/hypermail/linux/kernel/1501.3/06268.html.
It's likely more to do with how the IP is configured rather than the
version. The big difference between dw-hdmi used in iMX6 and elsewhere
is that iMX6 uses a built-in AHB audio interface and not I2S. Elsewhere
uses I2S.
I2S does not have the capability to convey channel status information
(which is required by HDMI). With AHB, it is encoded into the data in
memory.
So, I think this setup should be done in the I2S driver and not in the
core driver.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
