[Bug 111482] Sapphire Pulse RX 5700 XT power consumption

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Comment # 8 on bug 111482 from
I just did some more tests, and in my case, it wasn't strictly the refresh
rate, but the timings being too aggressive (which I needed to do to lower the
pixel clock enough due to driver limits, which are quite conservative).

This wasn't as much of a problem with Vega, since the idle power usage was
about the same (12-15W), but it is with Navi.

I will also add that during my tests, I found it was possible to leave the
system in a state where I couldn't leave the high memclock/power usage
situation after a while, even when switching to 60hz, requiring a reboot. So
that might be what is happening on your system, Robert.


You are receiving this mail because:
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux