Two things below
On Tue, 2019-08-27 at 19:15 +0200, Daniel Vetter wrote:
> On Tue, Aug 27, 2019 at 12:49:17PM -0400, Lyude Paul wrote:
> > On Tue, 2019-08-13 at 16:50 +0200, Daniel Vetter wrote:
> > > On Wed, Jul 17, 2019 at 09:42:28PM -0400, Lyude Paul wrote:
> > > > Unfortunately the DP MST helpers do not have much in the way of
> > > > debugging utilities. So, let's add some!
> > > >
> > > > This adds basic debugging output for down sideband requests that we
> > > > send
> > > > from the driver, so that we can actually discern what's happening when
> > > > sideband requests timeout. Note that with this commit, we'll be
> > > > dumping
> > > > out sideband requests under both of the following conditions:
> > > >
> > > > - When the user has enabled DRM_UT_DP output, of course.
> > > > - When the user has enabled DRM_UT_KMS or DRM_UT_DP, and a sideband
> > > > request has failed in some way. This will allow for developers to
> > > > get
> > > > a basic idea of what's actually happening with failed modesets on
> > > > MST,
> > > > without needing to have DRM_UT_DP explicitly enabled.
> > > >
> > > > Since there wasn't really a good way of testing that any of this
> > > > worked,
> > > > I ended up writing simple selftests that lightly test sideband message
> > > > encoding and decoding as well. Enjoy!
> > > >
> > > > Cc: Juston Li <juston.li@xxxxxxxxx>
> > > > Cc: Imre Deak <imre.deak@xxxxxxxxx>
> > > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > Cc: Harry Wentland <hwentlan@xxxxxxx>
> > > > Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx>
> > > > ---
> > > > drivers/gpu/drm/drm_dp_mst_topology.c | 308
> > > > +++++++++++++++++-
> > > > .../gpu/drm/drm_dp_mst_topology_internal.h | 24 ++
> > > > .../gpu/drm/selftests/drm_modeset_selftests.h | 1 +
> > > > .../drm/selftests/test-drm_dp_mst_helper.c | 212 ++++++++++++
> > > > .../drm/selftests/test-drm_modeset_common.h | 1 +
> > > > include/drm/drm_dp_mst_helper.h | 2 +-
> > > > 6 files changed, 543 insertions(+), 5 deletions(-)
> > > > create mode 100644 drivers/gpu/drm/drm_dp_mst_topology_internal.h
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c
> > > > b/drivers/gpu/drm/drm_dp_mst_topology.c
> > > > index 9e382117896d..defc5e09fb9a 100644
> > > > --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> > > > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> > > > @@ -36,6 +36,8 @@
> > > > #include <drm/drm_print.h>
> > > > #include <drm/drm_probe_helper.h>
> > > >
> > > > +#include "drm_dp_mst_topology_internal.h"
> > > > +
> > > > /**
> > > > * DOC: dp mst helper
> > > > *
> > > > @@ -68,6 +70,8 @@ static int drm_dp_mst_register_i2c_bus(struct
> > > > drm_dp_aux
> > > > *aux);
> > > > static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux);
> > > > static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr);
> > > >
> > > > +#define DBG_PREFIX "[dp_mst]"
> > > > +
> > > > #define DP_STR(x) [DP_ ## x] = #x
> > > >
> > > > static const char *drm_dp_mst_req_type_str(u8 req_type)
> > > > @@ -124,6 +128,43 @@ static const char *drm_dp_mst_nak_reason_str(u8
> > > > nak_reason)
> > > > }
> > > >
> > > > #undef DP_STR
> > > > +#define DP_STR(x) [DRM_DP_SIDEBAND_TX_ ## x] = #x
> > > > +
> > > > +static const char *drm_dp_mst_sideband_tx_state_str(int state)
> > > > +{
> > > > + static const char * const sideband_reason_str[] = {
> > > > + DP_STR(QUEUED),
> > > > + DP_STR(START_SEND),
> > > > + DP_STR(SENT),
> > > > + DP_STR(RX),
> > > > + DP_STR(TIMEOUT),
> > > > + };
> > > > +
> > > > + if (state >= ARRAY_SIZE(sideband_reason_str) ||
> > > > + !sideband_reason_str[state])
> > > > + return "unknown";
> > > > +
> > > > + return sideband_reason_str[state];
> > > > +}
> > > > +
> > > > +static int
> > > > +drm_dp_mst_rad_to_str(const u8 rad[8], u8 lct, char *out, size_t len)
> > > > +{
> > > > + int i;
> > > > + u8 unpacked_rad[16];
> > > > +
> > > > + for (i = 0; i < lct; i++) {
> > > > + if (i % 2)
> > > > + unpacked_rad[i] = rad[i / 2] >> 4;
> > > > + else
> > > > + unpacked_rad[i] = rad[i / 2] & BIT_MASK(4);
> > > > + }
> > > > +
> > > > + /* TODO: Eventually add something to printk so we can format
> > > > the rad
> > > > + * like this: 1.2.3
> > > > + */
> > >
> > > lct *=2;
> > >
> > > missing here? And yeah the todo would be sweet, but quite a bit more
> > > typing I guess.
> > >
> > > > + return snprintf(out, len, "%*phC", lct, unpacked_rad);
> > > > +}
> > > >
> > > > /* sideband msg handling */
> > > > static u8 drm_dp_msg_header_crc4(const uint8_t *data, size_t
> > > > num_nibbles)
> > > > @@ -256,8 +297,9 @@ static bool drm_dp_decode_sideband_msg_hdr(struct
> > > > drm_dp_sideband_msg_hdr *hdr,
> > > > return true;
> > > > }
> > > >
> > > > -static void drm_dp_encode_sideband_req(struct
> > > > drm_dp_sideband_msg_req_body *req,
> > > > - struct drm_dp_sideband_msg_tx
> > > > *raw)
> > > > +void
> > > > +drm_dp_encode_sideband_req(const struct drm_dp_sideband_msg_req_body
> > > > *req,
> > > > + struct drm_dp_sideband_msg_tx *raw)
> > > > {
> > > > int idx = 0;
> > > > int i;
> > > > @@ -362,6 +404,249 @@ static void drm_dp_encode_sideband_req(struct
> > > > drm_dp_sideband_msg_req_body *req,
> > > > }
> > > > raw->cur_len = idx;
> > > > }
> > > > +EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_encode_sideband_req);
> > > > +
> > > > +/* Decode a sideband request we've encoded, mainly used for debugging
> > > > */
> > > > +int
> > > > +drm_dp_decode_sideband_req(const struct drm_dp_sideband_msg_tx *raw,
> > > > + struct drm_dp_sideband_msg_req_body *req)
> > > > +{
> > > > + const u8 *buf = raw->msg;
> > > > + int i, idx = 0;
> > > > +
> > > > + req->req_type = buf[idx++] & 0x7f;
> > > > + switch (req->req_type) {
> > > > + case DP_ENUM_PATH_RESOURCES:
> > > > + case DP_POWER_DOWN_PHY:
> > > > + case DP_POWER_UP_PHY:
> > >
> > > OCD warning: the enum isn't ordered the same way here and in
> > > drm_dp_encode_sideband_req().
> > >
> > > > + req->u.port_num.port_number = (buf[idx] >> 4) & 0xf;
> > > > + break;
> > > > + case DP_ALLOCATE_PAYLOAD:
> > > > + {
> > > > + struct drm_dp_allocate_payload *a =
> > > > + &req->u.allocate_payload;
> > > > +
> > > > + a->number_sdp_streams = buf[idx] & 0xf;
> > > > + a->port_number = (buf[idx] >> 4) & 0xf;
> > > > +
> > > > + a->vcpi = buf[++idx] & 0x7f;
> > >
> > > Complain here if 0x80 is set?
> > >
> > > > +
> > > > + a->pbn = buf[++idx] << 8;
> > > > + a->pbn |= buf[++idx];
> > > > +
> > > > + idx++;
> > > > + for (i = 0; i < a->number_sdp_streams; i++) {
> > > > + a->sdp_stream_sink[i] =
> > > > + (buf[idx + (i / 2)] >> ((i %
> > > > 2) ? 0 :
> > > > 4)) & 0xf;
> > > > + }
> > > > + }
> > > > + break;
> > > > + case DP_QUERY_PAYLOAD:
> > > > + req->u.query_payload.port_number = (buf[idx] >> 4) &
> > > > 0xf;
> > > > + req->u.query_payload.vcpi = buf[++idx] & 0x7f;
> > >
> > > Same here for the highest bit?
> > >
> > > > + break;
> > > > + case DP_REMOTE_DPCD_READ:
> > > > + {
> > > > + struct drm_dp_remote_dpcd_read *r = &req-
> > > > >u.dpcd_read;
> > > > +
> > > > + r->port_number = (buf[idx] >> 4) & 0xf;
> > > > +
> > > > + r->dpcd_address = (buf[idx] << 16) & 0xf0000;
> > > > + r->dpcd_address |= (buf[++idx] << 8) & 0xff00;
> > > > + r->dpcd_address |= buf[++idx] & 0xff;
> > > > +
> > > > + r->num_bytes = buf[++idx];
> > > > + }
> > > > + break;
> > > > + case DP_REMOTE_DPCD_WRITE:
> > > > + {
> > > > + struct drm_dp_remote_dpcd_write *w =
> > > > + &req->u.dpcd_write;
> > > > +
> > > > + w->port_number = (buf[idx] >> 4) & 0xf;
> > > > +
> > > > + w->dpcd_address = (buf[idx] << 16) & 0xf0000;
> > > > + w->dpcd_address |= (buf[++idx] << 8) & 0xff00;
> > > > + w->dpcd_address |= buf[++idx] & 0xff;
> > > > +
> > > > + w->num_bytes = buf[++idx];
> > > > +
> > > > + w->bytes = kmemdup(&buf[++idx], w->num_bytes,
> > > > + GFP_KERNEL);
> > >
> > > But if we go really strict on validation we'd need to make sure we don't
> > > walk past raw->cur_len ... probably not worth it?
> > >
> > > > + if (!w->bytes)
> > > > + return -ENOMEM;
> > > > + }
> > > > + break;
> > > > + case DP_REMOTE_I2C_READ:
> > > > + {
> > > > + struct drm_dp_remote_i2c_read *r = &req-
> > > > >u.i2c_read;
> > > > + struct drm_dp_remote_i2c_read_tx *tx;
> > > > + bool failed = false;
> > > > +
> > > > + r->num_transactions = buf[idx] & 0x3;
> > > > + r->port_number = (buf[idx] >> 4) & 0xf;
> > > > + for (i = 0; i < r->num_transactions; i++) {
> > > > + tx = &r->transactions[i];
> > > > +
> > > > + tx->i2c_dev_id = buf[++idx] & 0x7f;
> > > > + tx->num_bytes = buf[++idx];
> > > > + tx->bytes = kmemdup(&buf[++idx],
> > > > + tx->num_bytes,
> > > > + GFP_KERNEL);
> > > > + if (!tx->bytes) {
> > > > + failed = true;
> > > > + break;
> > > > + }
> > > > + idx += tx->num_bytes;
> > > > + tx->no_stop_bit = (buf[idx] >> 5) &
> > > > 0x1;
> > > > + tx->i2c_transaction_delay = buf[idx] &
> > > > 0xf;
> > > > + }
> > > > +
> > > > + if (failed) {
> > > > + for (i = 0; i < r->num_transactions;
> > > > i++)
> > > > + kfree(tx->bytes);
> > > > + return -ENOMEM;
> > > > + }
> > > > +
> > > > + r->read_i2c_device_id = buf[++idx] & 0x7f;
> > > > + r->num_bytes_read = buf[++idx];
> > > > + }
> > > > + break;
> > > > + case DP_REMOTE_I2C_WRITE:
> > > > + {
> > > > + struct drm_dp_remote_i2c_write *w = &req-
> > > > >u.i2c_write;
> > > > +
> > > > + w->port_number = (buf[idx] >> 4) & 0xf;
> > > > + w->write_i2c_device_id = buf[++idx] & 0x7f;
> > > > + w->num_bytes = buf[++idx];
> > > > + w->bytes = kmemdup(&buf[++idx], w->num_bytes,
> > > > + GFP_KERNEL);
> > > > + if (!w->bytes)
> > > > + return -ENOMEM;
> > > > + }
> > > > + break;
> > > > + }
> > >
> > > For safety: Should we validate cur_len here? Or return it, and let the
> > > caller deal with any mismatches.
> > >
> > > But I'm kinda leaning towards no safety here, since it's not dealing
> > > with
> > > any replies we get from the hw/externally, which might be used for
> > > attacking us. If we later on have the same thing but for
> > > drm_dp_sideband_parse_reply() then a lot more fun.
> > >
> > > > +
> > > > + return 0;
> > > > +}
> > > > +EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_decode_sideband_req);
> > > > +
> > > > +void
> > > > +drm_dp_dump_sideband_msg_req_body(const struct
> > > > drm_dp_sideband_msg_req_body *req,
> > > > + int indent, struct drm_printer
> > > > *printer)
> > > > +{
> > > > + int i;
> > > > +
> > > > +#define P(f, ...) drm_printf_indent(printer, indent, f,
> > > > ##__VA_ARGS__)
> > > > + if (req->req_type == DP_LINK_ADDRESS) {
> > > > + /* No contents to print */
> > > > + P("type=%s\n", drm_dp_mst_req_type_str(req-
> > > > >req_type));
> > > > + return;
> > > > + }
> > > > +
> > > > + P("type=%s contents:\n", drm_dp_mst_req_type_str(req-
> > > > >req_type));
> > > > + indent++;
> > > > +
> > > > + switch (req->req_type) {
> > > > + case DP_ENUM_PATH_RESOURCES:
> > > > + case DP_POWER_DOWN_PHY:
> > > > + case DP_POWER_UP_PHY:
> > > > + P("port=%d\n", req->u.port_num.port_number);
> > > > + break;
> > > > + case DP_ALLOCATE_PAYLOAD:
> > > > + P("port=%d vcpi=%d pbn=%d sdp_streams=%d %*ph\n",
> > > > + req->u.allocate_payload.port_number,
> > > > + req->u.allocate_payload.vcpi, req-
> > > > >u.allocate_payload.pbn,
> > > > + req->u.allocate_payload.number_sdp_streams,
> > > > + req->u.allocate_payload.number_sdp_streams,
> > > > + req->u.allocate_payload.sdp_stream_sink);
> > > > + break;
> > > > + case DP_QUERY_PAYLOAD:
> > > > + P("port=%d vcpi=%d\n",
> > > > + req->u.query_payload.port_number,
> > > > + req->u.query_payload.vcpi);
> > > > + break;
> > > > + case DP_REMOTE_DPCD_READ:
> > > > + P("port=%d dpcd_addr=%05x len=%d\n",
> > > > + req->u.dpcd_read.port_number, req-
> > > > >u.dpcd_read.dpcd_address,
> > > > + req->u.dpcd_read.num_bytes);
> > > > + break;
> > > > + case DP_REMOTE_DPCD_WRITE:
> > > > + P("port=%d addr=%05x len=%d: %*ph\n",
> > > > + req->u.dpcd_write.port_number,
> > > > + req->u.dpcd_write.dpcd_address,
> > > > + req->u.dpcd_write.num_bytes, req-
> > > > >u.dpcd_write.num_bytes,
> > > > + req->u.dpcd_write.bytes);
> > > > + break;
> > > > + case DP_REMOTE_I2C_READ:
> > > > + P("port=%d num_tx=%d id=%d size=%d:\n",
> > > > + req->u.i2c_read.port_number,
> > > > + req->u.i2c_read.num_transactions,
> > > > + req->u.i2c_read.read_i2c_device_id,
> > > > + req->u.i2c_read.num_bytes_read);
> > > > +
> > > > + indent++;
> > > > + for (i = 0; i < req->u.i2c_read.num_transactions; i++)
> > > > {
> > > > + const struct drm_dp_remote_i2c_read_tx *rtx =
> > > > + &req->u.i2c_read.transactions[i];
> > > > +
> > > > + P("%d: id=%03d size=%03d no_stop_bit=%d
> > > > tx_delay=%03d:
> > > > %*ph\n",
> > > > + i, rtx->i2c_dev_id, rtx->num_bytes,
> > > > + rtx->no_stop_bit, rtx-
> > > > >i2c_transaction_delay,
> > > > + rtx->num_bytes, rtx->bytes);
> > > > + }
> > > > + break;
> > > > + case DP_REMOTE_I2C_WRITE:
> > > > + P("port=%d id=%d size=%d: %*ph\n",
> > > > + req->u.i2c_write.port_number,
> > > > + req->u.i2c_write.write_i2c_device_id,
> > > > + req->u.i2c_write.num_bytes, req-
> > > > >u.i2c_write.num_bytes,
> > > > + req->u.i2c_write.bytes);
> > > > + break;
> > > > + default:
> > > > + P("???\n");
> > > > + break;
> > > > + }
> > > > +#undef P
> > > > +}
> > > > +EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_dump_sideband_msg_req_body);
> > > > +
> > > > +static inline void
> > > > +drm_dp_mst_dump_sideband_msg_tx(struct drm_printer *p,
> > > > + const struct drm_dp_sideband_msg_tx
> > > > *txmsg)
> > > > +{
> > > > + struct drm_dp_sideband_msg_req_body req;
> > > > + char buf[64];
> > > > + int ret;
> > > > + int i;
> > > > +
> > > > + drm_dp_mst_rad_to_str(txmsg->dst->rad, txmsg->dst->lct, buf,
> > > > + sizeof(buf));
> > > > + drm_printf(p, "txmsg cur_offset=%x cur_len=%x seqno=%x
> > > > state=%s
> > > > path_msg=%d dst=%s\n",
> > > > + txmsg->cur_offset, txmsg->cur_len, txmsg->seqno,
> > > > + drm_dp_mst_sideband_tx_state_str(txmsg->state),
> > > > + txmsg->path_msg, buf);
> > > > +
> > > > + ret = drm_dp_decode_sideband_req(txmsg, &req);
> > > > + if (ret) {
> > > > + drm_printf(p, "<failed to decode sideband req: %d>\n",
> > > > ret);
> > > > + return;
> > > > + }
> > > > + drm_dp_dump_sideband_msg_req_body(&req, 1, p);
> > > > +
> > > > + switch (req.req_type) {
> > > > + case DP_REMOTE_DPCD_WRITE:
> > > > + kfree(req.u.dpcd_write.bytes);
> > > > + break;
> > > > + case DP_REMOTE_I2C_READ:
> > > > + for (i = 0; i < req.u.i2c_read.num_transactions; i++)
> > > > + kfree(req.u.i2c_read.transactions[i].bytes);
> > > > + break;
> > > > + case DP_REMOTE_I2C_WRITE:
> > > > + kfree(req.u.i2c_write.bytes);
> > > > + break;
> > > > + }
> > > > +}
> > > >
> > > > static void drm_dp_crc_sideband_chunk_req(u8 *msg, u8 len)
> > > > {
> > > > @@ -893,6 +1178,11 @@ static int drm_dp_mst_wait_tx_reply(struct
> > > > drm_dp_mst_branch *mstb,
> > > > }
> > > > }
> > > > out:
> > > > + if (unlikely(ret == -EIO && drm_debug & (DRM_UT_DP |
> > > > DRM_UT_KMS))) {
> > >
> > > Hm I'd only check for DRM_UT_DP here.
Was going to go ahead with this, but realized it might not be a great idea.
One of the reasons I went with DRM_UT_DP | DRM_UT_KMS here is because
generally, I'd assume that (this is the case for me at least) DRM_UT_DP serves
as a way to trace what's going on with DP, and DRM_UT_KMS is for non-atomic
specific modesetting debug info. That being said, if we fail sending a message
like PAYLOAD_ALLOCATE then the modeset itself is going to not work correctly
and thus - the contents of failure would still be relevant to someone working
on modesetting issues even if they're not interested in the entirity of what's
going on between the sink and the source.
That, and we were already printing when messages timed out under DRM_UT_KMS.
Granted though, that printing was added well before I introduced DRM_UT_DP.
However, I suppose I could just move that back to using DRM_DEBUG_KMS() and
dump the sideband message seperately.
Maybe I'm overthinking this a bit, thoughts?
> > >
> > > > + struct drm_printer p = drm_debug_printer(DBG_PREFIX);
> > > > +
> > > > + drm_dp_mst_dump_sideband_msg_tx(&p, txmsg);
> > > > + }
> > > > mutex_unlock(&mgr->qlock);
> > > >
> > > > return ret;
> > > > @@ -1927,8 +2217,11 @@ static int process_single_tx_qlock(struct
> > > > drm_dp_mst_topology_mgr *mgr,
> > > > idx += tosend + 1;
> > > >
> > > > ret = drm_dp_send_sideband_msg(mgr, up, chunk, idx);
> > > > - if (ret) {
> > > > - DRM_DEBUG_KMS("sideband msg failed to send\n");
> > > > + if (ret && unlikely(drm_debug & (DRM_UT_DP | DRM_UT_KMS))) {
> > >
> > > Same.
> > >
> > > > + struct drm_printer p = drm_debug_printer(DBG_PREFIX);
> > > > +
> > > > + drm_printf(&p, "sideband msg failed to send\n");
> > > > + drm_dp_mst_dump_sideband_msg_tx(&p, txmsg);
> > > > return ret;
> > > > }
> > > >
> > > > @@ -1990,6 +2283,13 @@ static void drm_dp_queue_down_tx(struct
> > > > drm_dp_mst_topology_mgr *mgr,
> > > > {
> > > > mutex_lock(&mgr->qlock);
> > > > list_add_tail(&txmsg->next, &mgr->tx_msg_downq);
> > > > +
> > > > + if (unlikely(drm_debug & DRM_UT_DP)) {
> > >
> > > Like you do here.
> > >
> > > > + struct drm_printer p = drm_debug_printer(DBG_PREFIX);
> > > > +
> > > > + drm_dp_mst_dump_sideband_msg_tx(&p, txmsg);
> > > > + }
> > > > +
> > > > if (list_is_singular(&mgr->tx_msg_downq))
> > > > process_single_down_tx_qlock(mgr);
> > > > mutex_unlock(&mgr->qlock);
> > > > diff --git a/drivers/gpu/drm/drm_dp_mst_topology_internal.h
> > > > b/drivers/gpu/drm/drm_dp_mst_topology_internal.h
> > > > new file mode 100644
> > > > index 000000000000..eeda9a61c657
> > > > --- /dev/null
> > > > +++ b/drivers/gpu/drm/drm_dp_mst_topology_internal.h
> > > > @@ -0,0 +1,24 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0-only
> > > > + *
> > > > + * Declarations for DP MST related functions which are only used in
> > > > selftests
> > > > + *
> > > > + * Copyright © 2018 Red Hat
> > > > + * Authors:
> > > > + * Lyude Paul <lyude@xxxxxxxxxx>
> > > > + */
> > > > +
> > > > +#ifndef _DRM_DP_MST_HELPER_INTERNAL_H_
> > > > +#define _DRM_DP_MST_HELPER_INTERNAL_H_
> > > > +
> > > > +#include <drm/drm_dp_mst_helper.h>
> > > > +
> > > > +void
> > > > +drm_dp_encode_sideband_req(const struct drm_dp_sideband_msg_req_body
> > > > *req,
> > > > + struct drm_dp_sideband_msg_tx *raw);
> > > > +int drm_dp_decode_sideband_req(const struct drm_dp_sideband_msg_tx
> > > > *raw,
> > > > + struct drm_dp_sideband_msg_req_body
> > > > *req);
> > > > +void
> > > > +drm_dp_dump_sideband_msg_req_body(const struct
> > > > drm_dp_sideband_msg_req_body *req,
> > > > + int indent, struct drm_printer
> > > > *printer);
> > > > +
> > > > +#endif /* !_DRM_DP_MST_HELPER_INTERNAL_H_ */
> > > > diff --git a/drivers/gpu/drm/selftests/drm_modeset_selftests.h
> > > > b/drivers/gpu/drm/selftests/drm_modeset_selftests.h
> > > > index dec3ee3ec96f..1898de0b4a4d 100644
> > > > --- a/drivers/gpu/drm/selftests/drm_modeset_selftests.h
> > > > +++ b/drivers/gpu/drm/selftests/drm_modeset_selftests.h
> > > > @@ -33,3 +33,4 @@ selftest(damage_iter_damage_one_outside,
> > > > igt_damage_iter_damage_one_outside)
> > > > selftest(damage_iter_damage_src_moved,
> > > > igt_damage_iter_damage_src_moved)
> > > > selftest(damage_iter_damage_not_visible,
> > > > igt_damage_iter_damage_not_visible)
> > > > selftest(dp_mst_calc_pbn_mode, igt_dp_mst_calc_pbn_mode)
> > > > +selftest(dp_mst_sideband_msg_req_decode,
> > > > igt_dp_mst_sideband_msg_req_decode)
> > > > diff --git a/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
> > > > b/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
> > > > index 51b2486ec917..ceca89babd65 100644
> > > > --- a/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
> > > > +++ b/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
> > > > @@ -8,6 +8,7 @@
> > > > #include <drm/drm_dp_mst_helper.h>
> > > > #include <drm/drm_print.h>
> > > >
> > > > +#include "../drm_dp_mst_topology_internal.h"
> > > > #include "test-drm_modeset_common.h"
> > > >
> > > > int igt_dp_mst_calc_pbn_mode(void *ignored)
> > > > @@ -34,3 +35,214 @@ int igt_dp_mst_calc_pbn_mode(void *ignored)
> > > >
> > > > return 0;
> > > > }
> > > > +
> > > > +static bool
> > > > +sideband_msg_req_equal(const struct drm_dp_sideband_msg_req_body *in,
> > > > + const struct drm_dp_sideband_msg_req_body *out)
> > > > +{
> > > > + const struct drm_dp_remote_i2c_read_tx *txin, *txout;
> > > > + int i;
> > > > +
> > > > + if (in->req_type != out->req_type)
> > > > + return false;
> > > > +
> > > > + switch (in->req_type) {
> > > > + case DP_ENUM_PATH_RESOURCES:
> > > > + case DP_POWER_UP_PHY:
> > > > + case DP_POWER_DOWN_PHY:
> > > > + case DP_ALLOCATE_PAYLOAD:
> > > > + case DP_QUERY_PAYLOAD:
> > > > + case DP_REMOTE_DPCD_READ:
> > > > + return memcmp(in, out, sizeof(*in)) == 0;
> > >
> > > Just memcmp the entire thing for everyrone (we assume kzalloc anyway),
> > > and
> > > then only have the additional checks for the few cases we need it? Would
> > > slightly reduce the code.
> >
> > Just realized also - this wouldn't work: remember that I2C_READ,
> > DPCD_WRITE,
> > and I2C_WRITE contain pointers which of course will be different even if
> > the
> > contents are the same. Unfortunately I don't think there's really a good
> > solution for this, unless we want to just remove the pointers and store
> > things
> > within the down request struct itself
>
> Uh ... disappoint :-/
>
> Then at least put that into a comment, and maybe make this the default:
> handler?
> > > > +
> > > > + case DP_REMOTE_I2C_READ:
> > > > +#define IN in->u.i2c_read
> > > > +#define OUT out->u.i2c_read
> > > > + if (IN.num_bytes_read != OUT.num_bytes_read ||
> > > > + IN.num_transactions != OUT.num_transactions ||
> > > > + IN.port_number != OUT.port_number ||
> > > > + IN.read_i2c_device_id != OUT.read_i2c_device_id)
> > > > + return false;
> > > > +
> > > > + for (i = 0; i < IN.num_transactions; i++) {
> > > > + txin = &IN.transactions[i];
> > > > + txout = &OUT.transactions[i];
> > > > +
> > > > + if (txin->i2c_dev_id != txout->i2c_dev_id ||
> > > > + txin->no_stop_bit != txout->no_stop_bit ||
> > > > + txin->num_bytes != txout->num_bytes ||
> > > > + txin->i2c_transaction_delay !=
> > > > + txout->i2c_transaction_delay)
> > > > + return false;
> > > > +
> > > > + if (memcmp(txin->bytes, txout->bytes,
> > > > + txin->num_bytes) != 0)
> > > > + return false;
> > > > + }
> > > > + break;
> > > > +#undef IN
> > > > +#undef OUT
> > > > +
> > > > + case DP_REMOTE_DPCD_WRITE:
> > > > +#define IN in->u.dpcd_write
> > > > +#define OUT out->u.dpcd_write
> > > > + if (IN.dpcd_address != OUT.dpcd_address ||
> > > > + IN.num_bytes != OUT.num_bytes ||
> > > > + IN.port_number != OUT.port_number)
> > > > + return false;
> > > > +
> > > > + return memcmp(IN.bytes, OUT.bytes, IN.num_bytes) == 0;
> > > > +#undef IN
> > > > +#undef OUT
> > > > +
> > > > + case DP_REMOTE_I2C_WRITE:
> > > > +#define IN in->u.i2c_write
> > > > +#define OUT out->u.i2c_write
> > > > + if (IN.port_number != OUT.port_number ||
> > > > + IN.write_i2c_device_id != OUT.write_i2c_device_id
> > > > ||
> > > > + IN.num_bytes != OUT.num_bytes)
> > > > + return false;
> > > > +
> > > > + return memcmp(IN.bytes, OUT.bytes, IN.num_bytes) == 0;
> > > > +#undef IN
> > > > +#undef OUT
> > > > + }
> > > > +
> > > > + return true;
> > > > +}
> > > > +
> > > > +static int
> > > > +__sideband_msg_req_encode_decode(int line,
> > > > + struct drm_dp_sideband_msg_req_body
> > > > *in,
> > > > + struct drm_dp_sideband_msg_req_body
> > > > *out)
> > > > +{
> > > > + struct drm_printer p = drm_err_printer(pr_fmt());
> > > > + struct drm_dp_sideband_msg_tx txmsg;
> > > > + int i, ret;
> > > > + bool eq;
> > > > +
> > > > + drm_dp_encode_sideband_req(in, &txmsg);
> > > > + ret = drm_dp_decode_sideband_req(&txmsg, out);
> > > > + if (ret < 0) {
> > > > + pr_err(pr_fmt("Failed to decode sideband request @
> > > > line %d:
> > > > %d\n"),
> > > > + line, ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > + eq = sideband_msg_req_equal(in, out);
> > > > + if (!eq) {
> > > > + pr_err(pr_fmt("Encode/decode @ line %d failed,
> > > > expected:\n"),
> > > > + line);
> > > > + drm_dp_dump_sideband_msg_req_body(in, 1, &p);
> > > > + pr_err(pr_fmt("Got:\n"));
> > > > + drm_dp_dump_sideband_msg_req_body(out, 1, &p);
> > > > + }
> > > > +
> > > > + switch (in->req_type) {
> > > > + case DP_REMOTE_DPCD_WRITE:
> > > > + kfree(out->u.dpcd_write.bytes);
> > > > + break;
> > > > + case DP_REMOTE_I2C_READ:
> > > > + for (i = 0; i < out->u.i2c_read.num_transactions; i++)
> > > > + kfree(out->u.i2c_read.transactions[i].bytes);
> > > > + break;
> > > > + case DP_REMOTE_I2C_WRITE:
> > > > + kfree(out->u.i2c_write.bytes);
> > > > + break;
> > > > + }
> > > > +
> > > > + /* Clear everything but the req_type for the input */
> > > > + memset(&in->u, 0, sizeof(in->u));
> > > > +
> > > > + /* Clear the output entirely */
> > > > + memset(out, 0, sizeof(*out));
> > > > +
> > > > + return eq ? 0 : -EINVAL;
> > > > +}
> > > > +
> > > > +int igt_dp_mst_sideband_msg_req_decode(void *unused)
> > > > +{
> > > > + struct drm_dp_sideband_msg_req_body in = { 0 }, out = { 0 };
> > > > + u8 data[] = { 0xff, 0x0, 0xdd };
> > > > + int i;
> > > > +
> > > > +#define
> > > > DO_TEST() \
> > > > + do
> > > > { \
> > > > + if (__sideband_msg_req_encode_decode(__LINE__, &in,
> > > > &out)) \
> > > > + return
> > > > -EINVAL; \
> > > > + } while (0)
> > >
> > > I had a tiny wtf moment here until I realized this is a macro ... maybe
> > > put the do on the first line and indent everything? Pure bikeshed to
> > > help
> > > the blind ...
> > >
> > > > +
> > > > + in.req_type = DP_ENUM_PATH_RESOURCES;
> > > > + in.u.port_num.port_number = 5;
> > > > + DO_TEST();
> > > > +
> > > > + in.req_type = DP_POWER_UP_PHY;
> > > > + in.u.port_num.port_number = 5;
> > > > + DO_TEST();
> > > > +
> > > > + in.req_type = DP_POWER_DOWN_PHY;
> > > > + in.u.port_num.port_number = 5;
> > > > + DO_TEST();
> > > > +
> > > > + in.req_type = DP_ALLOCATE_PAYLOAD;
> > > > + in.u.allocate_payload.number_sdp_streams = 3;
> > > > + for (i = 0; i < in.u.allocate_payload.number_sdp_streams; i++)
> > > > + in.u.allocate_payload.sdp_stream_sink[i] = i + 1;
> > > > + DO_TEST();
> > > > + in.u.allocate_payload.port_number = 0xf;
> > > > + DO_TEST();
> > > > + in.u.allocate_payload.vcpi = 0x7f;
> > > > + DO_TEST();
> > > > + in.u.allocate_payload.pbn = U16_MAX;
> > > > + DO_TEST();
> > > > +
> > > > + in.req_type = DP_QUERY_PAYLOAD;
> > > > + in.u.query_payload.port_number = 0xf;
> > > > + DO_TEST();
> > > > + in.u.query_payload.vcpi = 0x7f;
> > > > + DO_TEST();
> > > > +
> > > > + in.req_type = DP_REMOTE_DPCD_READ;
> > > > + in.u.dpcd_read.port_number = 0xf;
> > > > + DO_TEST();
> > > > + in.u.dpcd_read.dpcd_address = 0xfedcb;
> > > > + DO_TEST();
> > > > + in.u.dpcd_read.num_bytes = U8_MAX;
> > > > + DO_TEST();
> > > > +
> > > > + in.req_type = DP_REMOTE_DPCD_WRITE;
> > > > + in.u.dpcd_write.port_number = 0xf;
> > > > + DO_TEST();
> > > > + in.u.dpcd_write.dpcd_address = 0xfedcb;
> > > > + DO_TEST();
> > > > + in.u.dpcd_write.num_bytes = ARRAY_SIZE(data);
> > > > + in.u.dpcd_write.bytes = data;
> > > > + DO_TEST();
> > > > +
> > > > + in.req_type = DP_REMOTE_I2C_READ;
> > > > + in.u.i2c_read.port_number = 0xf;
> > > > + DO_TEST();
> > > > + in.u.i2c_read.read_i2c_device_id = 0x7f;
> > > > + DO_TEST();
> > > > + in.u.i2c_read.num_transactions = 3;
> > > > + in.u.i2c_read.num_bytes_read = ARRAY_SIZE(data) * 3;
> > > > + for (i = 0; i < in.u.i2c_read.num_transactions; i++) {
> > > > + in.u.i2c_read.transactions[i].bytes = data;
> > > > + in.u.i2c_read.transactions[i].num_bytes =
> > > > ARRAY_SIZE(data);
> > > > + in.u.i2c_read.transactions[i].i2c_dev_id = 0x7f & ~i;
> > > > + in.u.i2c_read.transactions[i].i2c_transaction_delay =
> > > > 0xf &
> > > > ~i;
> > > > + }
> > > > + DO_TEST();
> > > > +
> > > > + in.req_type = DP_REMOTE_I2C_WRITE;
> > > > + in.u.i2c_write.port_number = 0xf;
> > > > + DO_TEST();
> > > > + in.u.i2c_write.write_i2c_device_id = 0x7f;
> > > > + DO_TEST();
> > > > + in.u.i2c_write.num_bytes = ARRAY_SIZE(data);
> > > > + in.u.i2c_write.bytes = data;
> > > > + DO_TEST();
> > > > +
> > > > +#undef DO_TEST
> > > > + return 0;
> > > > +}
> > >
> > > Extremely nice, more unit tests ftw!
> > >
> > > With the nits somehow figured out: Reviewed-by: Daniel Vetter <
> > > daniel.vetter@xxxxxxxx>
> > >
> > > > diff --git a/drivers/gpu/drm/selftests/test-drm_modeset_common.h
> > > > b/drivers/gpu/drm/selftests/test-drm_modeset_common.h
> > > > index 590bda35a683..0fcb8bbc6a1b 100644
> > > > --- a/drivers/gpu/drm/selftests/test-drm_modeset_common.h
> > > > +++ b/drivers/gpu/drm/selftests/test-drm_modeset_common.h
> > > > @@ -40,5 +40,6 @@ int igt_damage_iter_damage_one_outside(void
> > > > *ignored);
> > > > int igt_damage_iter_damage_src_moved(void *ignored);
> > > > int igt_damage_iter_damage_not_visible(void *ignored);
> > > > int igt_dp_mst_calc_pbn_mode(void *ignored);
> > > > +int igt_dp_mst_sideband_msg_req_decode(void *ignored);
> > > >
> > > > #endif
> > > > diff --git a/include/drm/drm_dp_mst_helper.h
> > > > b/include/drm/drm_dp_mst_helper.h
> > > > index c01f3ea72756..4c8d177e83e5 100644
> > > > --- a/include/drm/drm_dp_mst_helper.h
> > > > +++ b/include/drm/drm_dp_mst_helper.h
> > > > @@ -293,7 +293,7 @@ struct drm_dp_remote_dpcd_write {
> > > > struct drm_dp_remote_i2c_read {
> > > > u8 num_transactions;
> > > > u8 port_number;
> > > > - struct {
> > > > + struct drm_dp_remote_i2c_read_tx {
> > > > u8 i2c_dev_id;
> > > > u8 num_bytes;
> > > > u8 *bytes;
> > > > --
> > > > 2.21.0
> > > >
> > --
> > Cheers,
> > Lyude Paul
> >
--
Cheers,
Lyude Paul
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
