On Wed, Aug 28, 2019 at 11:11:41AM -0400, Ilia Mirkin wrote: > On Wed, Aug 28, 2019 at 10:54 AM Ville Syrjälä > <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > > > > On Wed, Aug 28, 2019 at 10:47:08AM -0400, Ilia Mirkin wrote: > > > On Wed, Aug 28, 2019 at 10:38 AM Ville Syrjälä > > > <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > > > > > > > > On Mon, Aug 26, 2019 at 09:36:50AM -0400, Ilia Mirkin wrote: > > > > > This should probably be fixed to account for the scenario where an > > > > > HDMI connector is plugged directly into the DP++ port. I don't think > > > > > the dp.subconnector property will be valid in that case. > > > > > (Unfortunately I don't remember how one detects that particular > > > > > situation.) > > > > > > > > One may or may not be able to detect it very well. I've seen dongles > > > > that automagically change the DFP type from DP++ to DP/HDMI depending > > > > on what's plugged in, and I've also seen dongles that leave the DFP > > > > type to DP++. > > > > > > Well, our internal logic certainly knows if it's driving DP or TMDS. I > > > just don't remember how it knows this. > > > > You'll be driving DP in this case. The DFP will be the one driving > > DP or TMDS depending on what's plugged in. > > OK. That's not the case I was worried about though :) > > I'm worried about the case where you plug a true HDMI thing into the > DP port, which will then be driven by HDMI and none of the dp.* things > will be set (I don't remember, but they might even be in a union). I > think Intel multiplies connectors for this, but nouveau/amd just have > a single connector that handles both. Ah. Yeah, that's a bit more confusing since you kinda now have two levels of subconnectors. Not sure how to deal with that tbh. -- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
