On 2019-08-26 14:05, Guido Günther wrote: > Hi, > On Wed, Aug 21, 2019 at 01:15:40PM +0300, Robert Chiras wrote: >> This patch-set improves the use of eLCDIF block on iMX 8 SoCs (like 8MQ, 8MM >> and 8QXP). Following, are the new features added and fixes from this >> patch-set: > > I've applied this whole series on top of my NWL work and it looks good > with a DSI panel. Applying the whole series also fixes an issue where > after unblank the output was sometimes shifted about half a screen width > to the right (which didn't happen with DCSS). So at least from the parts > I could test: > > Tested-by: Guido Günther <agx@xxxxxxxxxxx> > > for the whole thing. Thanks for testing! What SoC did you use? I think it would be good to also give this a try on i.MX 7 or i.MX 6ULL before merging. -- Stefan > Cheers, > -- Guido >> >> 1. Add support for drm_bridge >> On 8MQ and 8MM, the LCDIF block is not directly connected to a parallel >> display connector, where an LCD panel can be attached, but instead it is >> connected to DSI controller. Since this DSI stands between the display >> controller (eLCDIF) and the physical connector, the DSI can be implemented >> as a DRM bridge. So, in order to be able to connect the mxsfb driver to >> the DSI driver, the support for a drm_bridge was needed in mxsfb DRM >> driver (the actual driver for the eLCDIF block). >> >> 2. Add support for additional pixel formats >> Some of the pixel formats needed by Android were not implemented in this >> driver, but they were actually supported. So, add support for them. >> >> 3. Add support for horizontal stride >> Having support for horizontal stride allows the use of eLCDIF with a GPU >> (for example) that can only output resolution sizes multiple of a power of >> 8. For example, 1080 is not a power of 16, so in order to support 1920x1080 >> output from GPUs that can produce linear buffers only in sizes multiple to 16, >> this feature is needed. >> >> 3. Few minor features and bug-fixing >> The addition of max-res DT property was actually needed in order to limit >> the bandwidth usage of the eLCDIF block. This is need on systems where >> multiple display controllers are presend and the memory bandwidth is not >> enough to handle all of them at maximum capacity (like it is the case on >> 8MQ, where there are two display controllers: DCSS and eLCDIF). >> The rest of the patches are bug-fixes. >> >> v3: >> - Removed the max-res property patches and added support for >> max-memory-bandwidth property, as it is also implemented in other drivers >> - Removed unnecessary drm_vblank_off in probe >> >> v2: >> - Collected Tested-by from Guido >> - Split the first patch, which added more than one feature into relevant >> patches, explaining each feature added >> - Also split the second patch into more patches, to differentiate between >> the feature itself (additional pixel formats support) and the cleanup >> of the register definitions for a better representation (guido) >> - Included a patch submitted by Guido, while he was testing my patch-set >> >> Guido Günther (1): >> drm/mxsfb: Read bus flags from bridge if present >> >> Mirela Rabulea (1): >> drm/mxsfb: Signal mode changed when bpp changed >> >> Robert Chiras (13): >> drm/mxsfb: Update mxsfb to support a bridge >> drm/mxsfb: Add defines for the rest of registers >> drm/mxsfb: Reset vital registers for a proper initialization >> drm/mxsfb: Update register definitions using bit manipulation defines >> drm/mxsfb: Update mxsfb with additional pixel formats >> drm/mxsfb: Fix the vblank events >> drm/mxsfb: Add max-memory-bandwidth property for MXSFB >> dt-bindings: display: Add max-memory-bandwidth property for mxsfb >> drm/mxsfb: Update mxsfb to support LCD reset >> drm/mxsfb: Improve the axi clock usage >> drm/mxsfb: Clear OUTSTANDING_REQS bits >> drm/mxsfb: Add support for horizontal stride >> drm/mxsfb: Add support for live pixel format change >> >> .../devicetree/bindings/display/mxsfb.txt | 5 + >> drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 287 ++++++++++++++++++--- >> drivers/gpu/drm/mxsfb/mxsfb_drv.c | 203 +++++++++++++-- >> drivers/gpu/drm/mxsfb/mxsfb_drv.h | 12 +- >> drivers/gpu/drm/mxsfb/mxsfb_out.c | 26 +- >> drivers/gpu/drm/mxsfb/mxsfb_regs.h | 193 +++++++++----- >> 6 files changed, 589 insertions(+), 137 deletions(-) >> >> -- >> 2.7.4 >> _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
