Re: [PATCH v6 4/7] firmware: qcom: scm: add support to restore secure config to qcm_scm-32

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 22 Aug 07:37 PDT 2019, Brian Masney wrote:

> From: Rob Clark <robdclark@xxxxxxxxx>
> 
> Add support to restore the secure configuration for qcm_scm-32.c. This
> is needed by the On Chip MEMory (OCMEM) that is present on some
> Snapdragon devices.
> 
> Signed-off-by: Rob Clark <robdclark@xxxxxxxxx>
> [masneyb@xxxxxxxxxxxxx: ported to latest kernel; set ctx_bank_num to
>  spare parameter.]
> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> ---
> Changes since v5:
> - None
> 
> Changes since v4:
> - None
> 
> Changes since v3:
> - None
> 
> Changes since v2:
> - None
> 
> Changes since v1:
> - Use existing __qcom_scm_restore_sec_cfg() function stub in
>   qcom_scm-32.c that was unimplemented
> - Set the cfg.ctx_bank_num to the spare function parameter. It was
>   previously set to the device_id.
> 
>  drivers/firmware/qcom_scm-32.c | 17 ++++++++++++++++-
>  drivers/firmware/qcom_scm.c    | 13 +++++++++++++
>  include/linux/qcom_scm.h       | 11 +++++++++++
>  3 files changed, 40 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
> index 4c2514e5e249..5d90b7f5ab5a 100644
> --- a/drivers/firmware/qcom_scm-32.c
> +++ b/drivers/firmware/qcom_scm-32.c
> @@ -617,7 +617,22 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
>  int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
>  			       u32 spare)
>  {
> -	return -ENODEV;
> +	struct msm_scm_sec_cfg {
> +		__le32 id;
> +		__le32 ctx_bank_num;
> +	} cfg;
> +	int ret, scm_ret = 0;
> +
> +	cfg.id = cpu_to_le32(device_id);
> +	cfg.ctx_bank_num = cpu_to_le32(spare);
> +
> +	ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
> +			    &cfg, sizeof(cfg), &scm_ret, sizeof(scm_ret));
> +
> +	if (ret || scm_ret)
> +		return ret ? ret : -EINVAL;
> +
> +	return 0;
>  }
>  
>  int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index 7e285ff3961d..27c1d98a34e6 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -367,6 +367,19 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
>  	.deassert = qcom_scm_pas_reset_deassert,
>  };
>  
> +/**
> + * qcom_scm_restore_sec_cfg_available() - Check if secure environment
> + * supports restore security config interface.
> + *
> + * Return true if restore-cfg interface is supported, false if not.
> + */
> +bool qcom_scm_restore_sec_cfg_available(void)
> +{
> +	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP,
> +					    QCOM_SCM_RESTORE_SEC_CFG);
> +}
> +EXPORT_SYMBOL(qcom_scm_restore_sec_cfg_available);
> +
>  int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
>  {
>  	return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
> diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
> index b49b734d662c..04382e1798e4 100644
> --- a/include/linux/qcom_scm.h
> +++ b/include/linux/qcom_scm.h
> @@ -34,6 +34,16 @@ enum qcom_scm_ocmem_client {
>  	QCOM_SCM_OCMEM_DEBUG_ID,
>  };
>  
> +enum qcom_scm_sec_dev_id {
> +	QCOM_SCM_MDSS_DEV_ID    = 1,
> +	QCOM_SCM_OCMEM_DEV_ID   = 5,
> +	QCOM_SCM_PCIE0_DEV_ID   = 11,
> +	QCOM_SCM_PCIE1_DEV_ID   = 12,
> +	QCOM_SCM_GFX_DEV_ID     = 18,
> +	QCOM_SCM_UFS_DEV_ID     = 19,
> +	QCOM_SCM_ICE_DEV_ID     = 20,
> +};
> +
>  #define QCOM_SCM_VMID_HLOS       0x3
>  #define QCOM_SCM_VMID_MSS_MSA    0xF
>  #define QCOM_SCM_VMID_WLAN       0x18
> @@ -70,6 +80,7 @@ extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
>  extern void qcom_scm_cpu_power_down(u32 flags);
>  extern u32 qcom_scm_get_version(void);
>  extern int qcom_scm_set_remote_state(u32 state, u32 id);
> +extern bool qcom_scm_restore_sec_cfg_available(void);
>  extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
>  extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
>  extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
> -- 
> 2.21.0
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux