Agh, sorry to go back on this - I'm noticing a lot more changes we should have
now that I've been able apply this locally to my tree. See below:
On Thu, 2019-08-22 at 09:57 -0400, David Francis wrote:
> With DSC, bpp can be a multiple of 1/16, so
> drm_dp_calc_pbn_mode is insufficient.
>
> Add drm_dp_calc_pbn_mode_dsc, a function which is
> the same as drm_dp_calc_pbn_mode, but the bpp is
> in units of 1/16.
>
> Reviewed-by: Lyude Paul <lyude@xxxxxxxxxx>
> Signed-off-by: David Francis <David.Francis@xxxxxxx>
> ---
> drivers/gpu/drm/drm_dp_mst_topology.c | 43 +++++++++++++++++++++++++++
> include/drm/drm_dp_mst_helper.h | 2 +-
> 2 files changed, 44 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c
> b/drivers/gpu/drm/drm_dp_mst_topology.c
> index 82add736e17d..8e2e731c35c5 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -3591,6 +3591,49 @@ static int test_calc_pbn_mode(void)
> return 0;
> }
>
> +/**
> + * drm_dp_calc_pbn_mode_dsc() - Calculate the PBN for a mode with DSC
> enabled.
> + * @clock: dot clock for the mode
> + * @dsc_bpp: dsc bits per pixel x16 (e.g. dsc_bpp = 136 is 8.5 bpp)
> + *
> + * This uses the formula in the spec to calculate the PBN value for a mode,
> + * given that the mode is using DSC
> + * Returns:
> + * PBN required for this mode
> + */
> +int drm_dp_calc_pbn_mode_dsc(int clock, int dsc_bpp)
> +{
> + u64 kbps;
> + s64 peak_kbps;
> + u32 numerator;
> + u32 denominator;
> +
> + kbps = clock * dsc_bpp;
> +
> + /*
> + * margin 5300ppm + 300ppm ~ 0.6% as per spec, factor is 1.006
> + * The unit of 54/64Mbytes/sec is an arbitrary unit chosen based on
> + * common multiplier to render an integer PBN for all link rate/lane
> + * counts combinations
> + * calculate
> + * peak_kbps *= (1/16) bppx16 to bpp
> + * peak_kbps *= (1006/1000)
> + * peak_kbps *= (64/54)
> + * peak_kbps *= 8 convert to bytes
> + *
> + * Divide numerator and denominator by 16 to avoid overflow
> + */
> +
> + numerator = 64 * 1006 / 16;
> + denominator = 54 * 8 * 1000 * 1000;
> +
> + kbps *= numerator;
> + peak_kbps = drm_fixp_from_fraction(kbps, denominator);
> +
> + return drm_fixp2int_ceil(peak_kbps);
> +}
> +EXPORT_SYMBOL(drm_dp_calc_pbn_mode_dsc);
I didn't notice until now that the only difference between the two functions
is
numerator = 64 * 1006 / 16;
So it doesn't seem like it's worth having two seperate functions for this, so
let's just get rid of drm_dp_calc_pbn_mode_dsc() and combine it with
drm_dp_calc_pbn_mode() by adding a bool parameter to specify whether or not
we're calculating for dsc
> +
> /* we want to kick the TX after we've ack the up/down IRQs. */
> static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr)
> {
> diff --git a/include/drm/drm_dp_mst_helper.h
> b/include/drm/drm_dp_mst_helper.h
> index 2ba6253ea6d3..ddb518f2157a 100644
> --- a/include/drm/drm_dp_mst_helper.h
> +++ b/include/drm/drm_dp_mst_helper.h
> @@ -611,7 +611,7 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector
> *connector, struct drm_dp_
>
>
> int drm_dp_calc_pbn_mode(int clock, int bpp);
> -
> +int drm_dp_calc_pbn_mode_dsc(int clock, int dsc_bpp);
>
> bool drm_dp_mst_allocate_vcpi(struct drm_dp_mst_topology_mgr *mgr,
> struct drm_dp_mst_port *port, int pbn, int
> slots);
--
Cheers,
Lyude Paul
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
