On Thu, Aug 22, 2019 at 9:37 AM Brian Masney <masneyb@xxxxxxxxxxxxx> wrote:
>
> Some A3xx and A4xx Adreno GPUs do not have GMEM inside the GPU core and
> must use the On Chip MEMory (OCMEM) in order to be functional. Add the
> optional ocmem property to the Adreno Graphics Management Unit bindings.
>
> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
> ---
> Changes since v5:
> - rename ocmem property to sram to match what TI currently has.
>
> Changes since v4:
> - None
>
> Changes since v3:
> - correct link to qcom,ocmem.yaml
>
> Changes since v2:
> - Add a3xx example with OCMEM
>
> Changes since v1:
> - None
>
> .../devicetree/bindings/display/msm/gmu.txt | 50 +++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt
> index 90af5b0a56a9..2305a2aede5a 100644
> --- a/Documentation/devicetree/bindings/display/msm/gmu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt
> @@ -31,6 +31,10 @@ Required properties:
> - iommus: phandle to the adreno iommu
> - operating-points-v2: phandle to the OPP operating points
>
> +Optional properties:
> +- sram: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon
> + SoCs. See Documentation/devicetree/bindings/sram/qcom,ocmem.yaml.
> +
> Example:
>
> / {
> @@ -63,3 +67,49 @@ Example:
> operating-points-v2 = <&gmu_opp_table>;
> };
> };
> +
> +a3xx example with OCMEM support:
> +
> +/ {
> + ...
> +
> + gpu: adreno@fdb00000 {
> + compatible = "qcom,adreno-330.2",
> + "qcom,adreno";
> + reg = <0xfdb00000 0x10000>;
> + reg-names = "kgsl_3d0_reg_memory";
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "kgsl_3d0_irq";
> + clock-names = "core",
> + "iface",
> + "mem_iface";
> + clocks = <&mmcc OXILI_GFX3D_CLK>,
> + <&mmcc OXILICX_AHB_CLK>,
> + <&mmcc OXILICX_AXI_CLK>;
> + sram = <&ocmem>;
Shouldn't this point to gmu-sram@0? You can always get the parent from
the child which is a bit easier than the other way around.
> + power-domains = <&mmcc OXILICX_GDSC>;
> + operating-points-v2 = <&gpu_opp_table>;
> + iommus = <&gpu_iommu 0>;
> + };
> +
> + ocmem: ocmem@fdd00000 {
> + compatible = "qcom,msm8974-ocmem";
> +
> + reg = <0xfdd00000 0x2000>,
> + <0xfec00000 0x180000>;
> + reg-names = "ctrl",
> + "mem";
> +
> + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
> + <&mmcc OCMEMCX_OCMEMNOC_CLK>;
> + clock-names = "core",
> + "iface";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + gmu-sram@0 {
> + reg = <0x0 0x100000>;
> + };
> + };
> +};
> --
> 2.21.0
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
