[PATCH v2 06/14] drm/dp-mst: Use dc and drm helpers to compute timeslots

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We were using drm helpers to convert a timing into its
bandwidth, its bandwidth into pbn, and its pbn into timeslots

These helpers
-Did not take DSC timings into account
-Used the link rate and lane count of the link's aux device,
 which are not the same as the link's current cap
-Did not take FEC into account (FEC reduces the PBN per timeslot)

For converting timing into PBN, add a new function
drm_dp_calc_pbn_mode_dsc that handles the DSC case

For converting PBN into time slots, amdgpu doesn't use the
'correct' atomic method (drm_dp_atomic_find_vcpi_slots), so
don't add a new helper to cover our approach. Use the same
means of calculating pbn per time slot as the DSC code.

v2: Add drm helper for clock to pbn conversion

Cc: Jerry Zuo <Jerry.Zuo@xxxxxxx>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
Signed-off-by: David Francis <David.Francis@xxxxxxx>
---
 .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 18 +++++---
 drivers/gpu/drm/drm_dp_mst_topology.c         | 41 +++++++++++++++++++
 include/drm/drm_dp_mst_helper.h               |  2 +-
 3 files changed, 54 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index 5f2c315b18ba..dfa99e0d6e64 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -189,8 +189,8 @@ bool dm_helpers_dp_mst_write_payload_allocation_table(
 	int slots = 0;
 	bool ret;
 	int clock;
-	int bpp = 0;
 	int pbn = 0;
+	int pbn_per_timeslot, bpp = 0;
 
 	aconnector = (struct amdgpu_dm_connector *)stream->dm_stream_context;
 
@@ -208,7 +208,6 @@ bool dm_helpers_dp_mst_write_payload_allocation_table(
 		clock = stream->timing.pix_clk_100hz / 10;
 
 		switch (stream->timing.display_color_depth) {
-
 		case COLOR_DEPTH_666:
 			bpp = 6;
 			break;
@@ -234,11 +233,18 @@ bool dm_helpers_dp_mst_write_payload_allocation_table(
 
 		bpp = bpp * 3;
 
-		/* TODO need to know link rate */
-
-		pbn = drm_dp_calc_pbn_mode(clock, bpp);
+#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
+		if (stream->timing.flags.DSC)
+			pbn = drm_dp_calc_pbn_mode_dsc(clock,
+					stream->timing.dsc_cfg.bits_per_pixel);
+		else
+#endif
+			pbn = drm_dp_calc_pbn_mode(clock, bpp);
 
-		slots = drm_dp_find_vcpi_slots(mst_mgr, pbn);
+		/* Convert kilobits per second / 64 (for 64 timeslots) to pbn (54/64 megabytes per second) */
+		pbn_per_timeslot = dc_link_bandwidth_kbps(
+				stream->link, dc_link_get_link_cap(stream->link)) / (8 * 1000 * 54);
+		slots = DIV_ROUND_UP(pbn, pbn_per_timeslot);
 		ret = drm_dp_mst_allocate_vcpi(mst_mgr, mst_port, pbn, slots);
 
 		if (!ret)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 398e7314ea8b..d789b7af7dbf 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3588,6 +3588,47 @@ static int test_calc_pbn_mode(void)
 	return 0;
 }
 
+/**
+ * drm_dp_calc_pbn_mode_dsc() - Calculate the PBN for a mode with DSC enabled.
+ * @clock: dot clock for the mode
+ * @dsc_bpp: dsc bits per pixel x16 (e.g. dsc_bpp = 136 is 8.5 bpp)
+ *
+ * This uses the formula in the spec to calculate the PBN value for a mode,
+ * given that the mode is using DSC
+ */
+int drm_dp_calc_pbn_mode_dsc(int clock, int dsc_bpp)
+{
+	u64 kbps;
+	s64 peak_kbps;
+	u32 numerator;
+	u32 denominator;
+
+	kbps = clock * dsc_bpp;
+
+	/*
+	 * margin 5300ppm + 300ppm ~ 0.6% as per spec, factor is 1.006
+	 * The unit of 54/64Mbytes/sec is an arbitrary unit chosen based on
+	 * common multiplier to render an integer PBN for all link rate/lane
+	 * counts combinations
+	 * calculate
+	 * peak_kbps *= (1/16) bppx16 to bpp
+	 * peak_kbps *= (1006/1000)
+	 * peak_kbps *= (64/54)
+	 * peak_kbps *= 8    convert to bytes
+	 *
+	 * Divide numerator and denominator by 16 to avoid overflow
+	 */
+
+	numerator = 64 * 1006 / 16;
+	denominator = 54 * 8 * 1000 * 1000;
+
+	kbps *= numerator;
+	peak_kbps = drm_fixp_from_fraction(kbps, denominator);
+
+	return drm_fixp2int_ceil(peak_kbps);
+}
+EXPORT_SYMBOL(drm_dp_calc_pbn_mode_dsc);
+
 /* we want to kick the TX after we've ack the up/down IRQs. */
 static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr)
 {
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index 2ba6253ea6d3..ddb518f2157a 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -611,7 +611,7 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_
 
 
 int drm_dp_calc_pbn_mode(int clock, int bpp);
-
+int drm_dp_calc_pbn_mode_dsc(int clock, int dsc_bpp);
 
 bool drm_dp_mst_allocate_vcpi(struct drm_dp_mst_topology_mgr *mgr,
 			      struct drm_dp_mst_port *port, int pbn, int slots);
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux