On 8/19/19 11:50 AM, David Francis wrote:
> We were using drm helpers to convert a timing into its
> bandwidth, its bandwidth into pbn, and its pbn into timeslots
>
> These helpers
> -Did not take DSC timings into account
> -Used the link rate and lane count of the link's aux device,
> which are not the same as the link's current cap
> -Did not take FEC into account (FEC reduces the PBN per timeslot)
>
> Use the DC helpers (dc_bandwidth_in_kbps_from_timing,
> dc_link_bandwidth_kbps) instead
>
> Cc: Jerry Zuo <Jerry.Zuo@xxxxxxx>
> Signed-off-by: David Francis <David.Francis@xxxxxxx>
Wouldn't this be a good candidate for shared DRM helpers or to modify
the existing ones to support this usecase?
Seems like this would be shared across drivers.
Nicholas Kazlauskas
> ---
> .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 41 ++++---------------
> 1 file changed, 8 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> index 5f2c315b18ba..b32c0790399a 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
> @@ -189,8 +189,8 @@ bool dm_helpers_dp_mst_write_payload_allocation_table(
> int slots = 0;
> bool ret;
> int clock;
> - int bpp = 0;
> int pbn = 0;
> + int pbn_per_timeslot;
>
> aconnector = (struct amdgpu_dm_connector *)stream->dm_stream_context;
>
> @@ -205,40 +205,15 @@ bool dm_helpers_dp_mst_write_payload_allocation_table(
> mst_port = aconnector->port;
>
> if (enable) {
> - clock = stream->timing.pix_clk_100hz / 10;
> -
> - switch (stream->timing.display_color_depth) {
> -
> - case COLOR_DEPTH_666:
> - bpp = 6;
> - break;
> - case COLOR_DEPTH_888:
> - bpp = 8;
> - break;
> - case COLOR_DEPTH_101010:
> - bpp = 10;
> - break;
> - case COLOR_DEPTH_121212:
> - bpp = 12;
> - break;
> - case COLOR_DEPTH_141414:
> - bpp = 14;
> - break;
> - case COLOR_DEPTH_161616:
> - bpp = 16;
> - break;
> - default:
> - ASSERT(bpp != 0);
> - break;
> - }
> -
> - bpp = bpp * 3;
> -
> - /* TODO need to know link rate */
> + clock = dc_bandwidth_in_kbps_from_timing(&stream->timing);
>
> - pbn = drm_dp_calc_pbn_mode(clock, bpp);
> + /* dc_bandwidth_in_kbps_from_timing already takes bpp into account */
> + pbn = drm_dp_calc_pbn_mode(clock, 1);
>
> - slots = drm_dp_find_vcpi_slots(mst_mgr, pbn);
> + /* Convert kilobits per second / 64 (for 64 timeslots) to pbn (54/64 megabytes per second) */
> + pbn_per_timeslot = dc_link_bandwidth_kbps(
> + stream->link, dc_link_get_link_cap(stream->link)) / (8 * 1000 * 54);
> + slots = DIV_ROUND_UP(pbn, pbn_per_timeslot);
> ret = drm_dp_mst_allocate_vcpi(mst_mgr, mst_port, pbn, slots);
>
> if (!ret)
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
