On Mon, Aug 12, 2019 at 9:30 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> When test-compiling the BCM2835 pin control driver on m68k:
>
> In file included from arch/m68k/include/asm/io_mm.h:32:0,
> from arch/m68k/include/asm/io.h:8,
> from include/linux/io.h:13,
> from include/linux/irq.h:20,
> from include/linux/gpio/driver.h:7,
> from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17:
> drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set':
> arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile'
> # define shifter ((*(volatile struct SHIFTER *)SHF_BAS))
>
> "shifter" is a too generic name for a global definition.
>
> As the corresponding definition for Atari TT is already called
> "shifter_tt", fix this by renaming the definition for Atari ST to
> "shifter_st".
>
> Reported-by: kbuild test robot <lkp@xxxxxxxxx>
> Suggested-by: Michael Schmitz <schmitzmic@xxxxxxxxx>
> Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Finally we can use the sh pfc pin controller on our m68k Atari.
Now if I can only resolder the capacitors on my Atari TT ST
before the board self-destructs I will one day test this.
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Yours,
Linus Walleij
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
