This panel is used on the Zoom2/3/3630 SDP boards.
The code is based on the omapdrm-specific panel-nec-nl8048hl11 driver
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
Changes since v2:
- Call drm_panel_unprepare() in .remove() handler
Changes since v1:
- Mention boards using the panel in Kconfig
- Renamed nl8048_device to nl8048_panel
- Comments updates
- Store width_mm and height_mm in drm_display_mode
- Use drm_panel_disable() in .remove() handler
---
drivers/gpu/drm/panel/Kconfig | 8 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-nec-nl8048hl11.c | 248 +++++++++++++++++++
3 files changed, 257 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-nec-nl8048hl11.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 87cdc330672b..d28133c6aa0a 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -119,6 +119,14 @@ config DRM_PANEL_LG_LG4573
Say Y here if you want to enable support for LG4573 RGB panel.
To compile this driver as a module, choose M here.
+config DRM_PANEL_NEC_NL8048HL11
+ tristate "NEC NL8048HL11 RGB panel"
+ depends on GPIOLIB && OF && SPI
+ help
+ Say Y here if you want to enable support for the NEC NL8048HL11 RGB
+ panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
+ as a module, choose M here.
+
config DRM_PANEL_NOVATEK_NT39016
tristate "Novatek NT39016 RGB/SPI panel"
depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 9bc6f3c5bf96..8052f9a7ad60 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
+obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
diff --git a/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c b/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c
new file mode 100644
index 000000000000..21bae2d0a23a
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-nec-nl8048hl11.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NEC NL8048HL11 Panel Driver
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated
+ *
+ * Based on the omapdrm-specific panel-nec-nl8048hl11 driver
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated
+ * Author: Erik Gilling <konkers@xxxxxxxxxxx>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/spi/spi.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct nl8048_panel {
+ struct drm_panel panel;
+
+ struct spi_device *spi;
+ struct gpio_desc *reset_gpio;
+};
+
+#define to_nl8048_device(p) container_of(p, struct nl8048_panel, panel)
+
+static int nl8048_write(struct nl8048_panel *lcd, unsigned char addr,
+ unsigned char value)
+{
+ u8 data[4] = { value, 0x01, addr, 0x00 };
+ int ret;
+
+ ret = spi_write(lcd->spi, data, sizeof(data));
+ if (ret)
+ dev_err(&lcd->spi->dev, "SPI write to %u failed: %d\n",
+ addr, ret);
+
+ return ret;
+}
+
+static int nl8048_init(struct nl8048_panel *lcd)
+{
+ static const struct {
+ unsigned char addr;
+ unsigned char data;
+ } nl8048_init_seq[] = {
+ { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 },
+ { 5, 0x14 }, { 6, 0x24 }, { 16, 0xd7 }, { 17, 0x00 },
+ { 18, 0x00 }, { 19, 0x55 }, { 20, 0x01 }, { 21, 0x70 },
+ { 22, 0x1e }, { 23, 0x25 }, { 24, 0x25 }, { 25, 0x02 },
+ { 26, 0x02 }, { 27, 0xa0 }, { 32, 0x2f }, { 33, 0x0f },
+ { 34, 0x0f }, { 35, 0x0f }, { 36, 0x0f }, { 37, 0x0f },
+ { 38, 0x0f }, { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 },
+ { 42, 0x02 }, { 43, 0x0f }, { 44, 0x0f }, { 45, 0x0f },
+ { 46, 0x0f }, { 47, 0x0f }, { 48, 0x0f }, { 49, 0x0f },
+ { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
+ { 80, 0x0c }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },
+ { 86, 0x14 }, { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 },
+ { 92, 0x02 }, { 93, 0x0c }, { 94, 0x1c }, { 95, 0x27 },
+ { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, { 103, 0x27 },
+ { 112, 0x01 }, { 113, 0x0e }, { 114, 0x02 }, { 115, 0x0c },
+ { 118, 0x0c }, { 121, 0x30 }, { 130, 0x00 }, { 131, 0x00 },
+ { 132, 0xfc }, { 134, 0x00 }, { 136, 0x00 }, { 138, 0x00 },
+ { 139, 0x00 }, { 140, 0x00 }, { 141, 0xfc }, { 143, 0x00 },
+ { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, { 149, 0x00 },
+ { 150, 0xfc }, { 152, 0x00 }, { 154, 0x00 }, { 156, 0x00 },
+ { 157, 0x00 },
+ };
+
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(nl8048_init_seq); ++i) {
+ ret = nl8048_write(lcd, nl8048_init_seq[i].addr,
+ nl8048_init_seq[i].data);
+ if (ret < 0)
+ return ret;
+ }
+
+ udelay(20);
+
+ return nl8048_write(lcd, 2, 0x00);
+}
+
+static int nl8048_disable(struct drm_panel *panel)
+{
+ struct nl8048_panel *lcd = to_nl8048_device(panel);
+
+ gpiod_set_value_cansleep(lcd->reset_gpio, 0);
+
+ return 0;
+}
+
+static int nl8048_enable(struct drm_panel *panel)
+{
+ struct nl8048_panel *lcd = to_nl8048_device(panel);
+
+ gpiod_set_value_cansleep(lcd->reset_gpio, 1);
+
+ return 0;
+}
+
+static const struct drm_display_mode nl8048_mode = {
+ /* NEC PIX Clock Ratings MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */
+ .clock = 23800,
+ .hdisplay = 800,
+ .hsync_start = 800 + 6,
+ .hsync_end = 800 + 6 + 1,
+ .htotal = 800 + 6 + 1 + 4,
+ .vdisplay = 480,
+ .vsync_start = 480 + 3,
+ .vsync_end = 480 + 3 + 1,
+ .vtotal = 480 + 3 + 1 + 4,
+ .vrefresh = 60,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .width_mm = 89,
+ .height_mm = 53,
+};
+
+static int nl8048_get_modes(struct drm_panel *panel)
+{
+ struct drm_connector *connector = panel->connector;
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &nl8048_mode);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ connector->display_info.width_mm = nl8048_mode.width_mm;
+ connector->display_info.height_mm = nl8048_mode.height_mm;
+ connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
+ | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs nl8048_funcs = {
+ .disable = nl8048_disable,
+ .enable = nl8048_enable,
+ .get_modes = nl8048_get_modes,
+};
+
+static int __maybe_unused nl8048_suspend(struct device *dev)
+{
+ struct nl8048_panel *lcd = dev_get_drvdata(dev);
+
+ nl8048_write(lcd, 2, 0x01);
+ msleep(40);
+
+ return 0;
+}
+
+static int __maybe_unused nl8048_resume(struct device *dev)
+{
+ struct nl8048_panel *lcd = dev_get_drvdata(dev);
+
+ /* Reinitialize the panel. */
+ spi_setup(lcd->spi);
+ nl8048_write(lcd, 2, 0x00);
+ nl8048_init(lcd);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(nl8048_pm_ops, nl8048_suspend, nl8048_resume);
+
+static int nl8048_probe(struct spi_device *spi)
+{
+ struct nl8048_panel *lcd;
+ int ret;
+
+ lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
+ if (lcd == NULL)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, lcd);
+ lcd->spi = spi;
+
+ lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(lcd->reset_gpio)) {
+ dev_err(&spi->dev, "failed to parse reset gpio\n");
+ return PTR_ERR(lcd->reset_gpio);
+ }
+
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 32;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
+ return ret;
+ }
+
+ ret = nl8048_init(lcd);
+ if (ret < 0)
+ return ret;
+
+ drm_panel_init(&lcd->panel);
+ lcd->panel.dev = &lcd->spi->dev;
+ lcd->panel.funcs = &nl8048_funcs;
+
+ return drm_panel_add(&lcd->panel);
+}
+
+static int nl8048_remove(struct spi_device *spi)
+{
+ struct nl8048_panel *lcd = spi_get_drvdata(spi);
+
+ drm_panel_remove(&lcd->panel);
+ drm_panel_disable(&lcd->panel);
+ drm_panel_unprepare(&lcd->panel);
+
+ return 0;
+}
+
+static const struct of_device_id nl8048_of_match[] = {
+ { .compatible = "nec,nl8048hl11", },
+ { /* sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, nl8048_of_match);
+
+static struct spi_driver nl8048_driver = {
+ .probe = nl8048_probe,
+ .remove = nl8048_remove,
+ .driver = {
+ .name = "panel-nec-nl8048hl11",
+ .pm = &nl8048_pm_ops,
+ .of_match_table = nl8048_of_match,
+ },
+};
+
+module_spi_driver(nl8048_driver);
+
+MODULE_ALIAS("spi:nec,nl8048hl11");
+MODULE_AUTHOR("Erik Gilling <konkers@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
+MODULE_LICENSE("GPL");
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
