On Tue, Aug 13, 2019 at 04:33:11PM +0300, Laurent Pinchart wrote:
> This panel is used on the OMAP3 Pandora.
>
> The code is based on the omapdrm-specific panel-tpo-td043mtea1 driver.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> Changes since v2:
>
> - Call drm_panel_disable() in .remove() handler
>
> Changes since v1:
>
> - Mention boards using the panel in Kconfig
> - Renamed td043mtea1_device to td043mtea1_panel
> - Fixed typo in Toppoly name
> - Comments updates
> - Store width_mm and height_mm in drm_display_mode
> - Use drm_panel_unprepare() in .remove() handler
> - Replace enable/disable with prepare/unprepare
> ---
> drivers/gpu/drm/panel/Kconfig | 7 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-tpo-td043mtea1.c | 509 +++++++++++++++++++
> 3 files changed, 517 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-tpo-td043mtea1.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index c2689420d2dd..f152bc4eeb53 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -332,6 +332,13 @@ config DRM_PANEL_TPO_TD028TTEC1
> Say Y here if you want to enable support for TPO TD028TTEC1 480x640
> 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
>
> +config DRM_PANEL_TPO_TD043MTEA1
> + tristate "Toppoly (TPO) TD043MTEA1 panel driver"
> + depends on GPIOLIB && OF && REGULATOR && SPI
> + help
> + Say Y here if you want to enable support for TPO TD043MTEA1 800x480
> + 4.3" panel (found on the OMAP3 Pandora board).
> +
> config DRM_PANEL_TPO_TPG110
> tristate "TPO TPG 800x400 panel"
> depends on OF && SPI && GPIOLIB
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 27b776737ad3..b6cd39fe0f20 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -35,5 +35,6 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> +obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> diff --git a/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c b/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c
> new file mode 100644
> index 000000000000..71824a334af7
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-tpo-td043mtea1.c
> @@ -0,0 +1,509 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Toppoly TD043MTEA1 Panel Driver
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated
> + *
> + * Based on the omapdrm-specific panel-tpo-td043mtea1 driver
> + *
> + * Author: Gražvydas Ignotas <notasas@xxxxxxxxx>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +#define TPO_R02_MODE(x) ((x) & 7)
> +#define TPO_R02_MODE_800x480 7
> +#define TPO_R02_NCLK_RISING BIT(3)
> +#define TPO_R02_HSYNC_HIGH BIT(4)
> +#define TPO_R02_VSYNC_HIGH BIT(5)
> +
> +#define TPO_R03_NSTANDBY BIT(0)
> +#define TPO_R03_EN_CP_CLK BIT(1)
> +#define TPO_R03_EN_VGL_PUMP BIT(2)
> +#define TPO_R03_EN_PWM BIT(3)
> +#define TPO_R03_DRIVING_CAP_100 BIT(4)
> +#define TPO_R03_EN_PRE_CHARGE BIT(6)
> +#define TPO_R03_SOFTWARE_CTL BIT(7)
> +
> +#define TPO_R04_NFLIP_H BIT(0)
> +#define TPO_R04_NFLIP_V BIT(1)
> +#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
> +#define TPO_R04_VGL_FREQ_1H BIT(4)
> +
> +#define TPO_R03_VAL_NORMAL \
> + (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | TPO_R03_EN_VGL_PUMP | \
> + TPO_R03_EN_PWM | TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
> + TPO_R03_SOFTWARE_CTL)
> +
> +#define TPO_R03_VAL_STANDBY \
> + (TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
> + TPO_R03_SOFTWARE_CTL)
> +
> +static const u16 td043mtea1_def_gamma[12] = {
> + 105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
> +};
> +
> +struct td043mtea1_panel {
> + struct drm_panel panel;
> +
> + struct spi_device *spi;
> + struct regulator *vcc_reg;
> + struct gpio_desc *reset_gpio;
> +
> + unsigned int mode;
> + u16 gamma[12];
> + bool vmirror;
> + bool powered_on;
> + bool spi_suspended;
> + bool power_on_resume;
> +};
> +
> +#define to_td043mtea1_device(p) container_of(p, struct td043mtea1_panel, panel)
> +
> +/* -----------------------------------------------------------------------------
> + * Hardware Access
> + */
> +
> +static int td043mtea1_write(struct td043mtea1_panel *lcd, u8 addr, u8 value)
> +{
> + struct spi_message msg;
> + struct spi_transfer xfer;
> + u16 data;
> + int ret;
> +
> + spi_message_init(&msg);
> +
> + memset(&xfer, 0, sizeof(xfer));
> +
> + data = ((u16)addr << 10) | (1 << 8) | value;
> + xfer.tx_buf = &data;
> + xfer.bits_per_word = 16;
> + xfer.len = 2;
> + spi_message_add_tail(&xfer, &msg);
> +
> + ret = spi_sync(lcd->spi, &msg);
> + if (ret < 0)
> + dev_warn(&lcd->spi->dev, "failed to write to LCD reg (%d)\n",
> + ret);
> +
> + return ret;
> +}
> +
> +static void td043mtea1_write_gamma(struct td043mtea1_panel *lcd)
> +{
> + const u16 *gamma = lcd->gamma;
> + unsigned int i;
> + u8 val;
> +
> + /* gamma bits [9:8] */
> + for (val = i = 0; i < 4; i++)
> + val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
> + td043mtea1_write(lcd, 0x11, val);
> +
> + for (val = i = 0; i < 4; i++)
> + val |= (gamma[i + 4] & 0x300) >> ((i + 1) * 2);
> + td043mtea1_write(lcd, 0x12, val);
> +
> + for (val = i = 0; i < 4; i++)
> + val |= (gamma[i + 8] & 0x300) >> ((i + 1) * 2);
> + td043mtea1_write(lcd, 0x13, val);
> +
> + /* gamma bits [7:0] */
> + for (val = i = 0; i < 12; i++)
> + td043mtea1_write(lcd, 0x14 + i, gamma[i] & 0xff);
> +}
> +
> +static int td043mtea1_write_mirror(struct td043mtea1_panel *lcd)
> +{
> + u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
> + TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
> + if (lcd->vmirror)
> + reg4 &= ~TPO_R04_NFLIP_V;
> +
> + return td043mtea1_write(lcd, 4, reg4);
> +}
> +
> +static int td043mtea1_power_on(struct td043mtea1_panel *lcd)
> +{
> + int ret;
> +
> + if (lcd->powered_on)
> + return 0;
> +
> + ret = regulator_enable(lcd->vcc_reg);
> + if (ret < 0)
> + return ret;
> +
> + /* Wait for the panel to stabilize. */
> + msleep(160);
> +
> + gpiod_set_value(lcd->reset_gpio, 0);
> +
> + td043mtea1_write(lcd, 2, TPO_R02_MODE(lcd->mode) | TPO_R02_NCLK_RISING);
> + td043mtea1_write(lcd, 3, TPO_R03_VAL_NORMAL);
> + td043mtea1_write(lcd, 0x20, 0xf0);
> + td043mtea1_write(lcd, 0x21, 0xf0);
> + td043mtea1_write_mirror(lcd);
> + td043mtea1_write_gamma(lcd);
> +
> + lcd->powered_on = true;
> +
> + return 0;
> +}
> +
> +static void td043mtea1_power_off(struct td043mtea1_panel *lcd)
> +{
> + if (!lcd->powered_on)
> + return;
> +
> + td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
> +
> + gpiod_set_value(lcd->reset_gpio, 1);
> +
> + /* wait for at least 2 vsyncs before cutting off power */
> + msleep(50);
> +
> + td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY);
> +
> + regulator_disable(lcd->vcc_reg);
> +
> + lcd->powered_on = false;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * sysfs
> + */
> +
> +static ssize_t vmirror_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", lcd->vmirror);
> +}
> +
> +static ssize_t vmirror_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
> + int val;
> + int ret;
> +
> + ret = kstrtoint(buf, 0, &val);
> + if (ret < 0)
> + return ret;
> +
> + lcd->vmirror = !!val;
> +
> + ret = td043mtea1_write_mirror(lcd);
> + if (ret < 0)
> + return ret;
> +
> + return count;
> +}
> +
> +static ssize_t mode_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", lcd->mode);
> +}
> +
> +static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
> + long val;
> + int ret;
> +
> + ret = kstrtol(buf, 0, &val);
> + if (ret != 0 || val & ~7)
> + return -EINVAL;
> +
> + lcd->mode = val;
> +
> + val |= TPO_R02_NCLK_RISING;
> + td043mtea1_write(lcd, 2, val);
> +
> + return count;
> +}
> +
> +static ssize_t gamma_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
> + ssize_t len = 0;
> + unsigned int i;
> + int ret;
> +
> + for (i = 0; i < ARRAY_SIZE(lcd->gamma); i++) {
> + ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
> + lcd->gamma[i]);
> + if (ret < 0)
> + return ret;
> + len += ret;
> + }
> + buf[len - 1] = '\n';
> +
> + return len;
> +}
> +
> +static ssize_t gamma_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
> + unsigned int g[12];
> + unsigned int i;
> + int ret;
> +
> + ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
> + &g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
> + &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
> + if (ret != 12)
> + return -EINVAL;
> +
> + for (i = 0; i < 12; i++)
> + lcd->gamma[i] = g[i];
> +
> + td043mtea1_write_gamma(lcd);
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR_RW(vmirror);
> +static DEVICE_ATTR_RW(mode);
> +static DEVICE_ATTR_RW(gamma);
> +
> +static struct attribute *td043mtea1_attrs[] = {
> + &dev_attr_vmirror.attr,
> + &dev_attr_mode.attr,
> + &dev_attr_gamma.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group td043mtea1_attr_group = {
> + .attrs = td043mtea1_attrs,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Panel Operations
> + */
> +
> +static int td043mtea1_unprepare(struct drm_panel *panel)
> +{
> + struct td043mtea1_panel *lcd = to_td043mtea1_device(panel);
> +
> + if (!lcd->spi_suspended)
> + td043mtea1_power_off(lcd);
> +
> + return 0;
> +}
> +
> +static int td043mtea1_prepare(struct drm_panel *panel)
> +{
> + struct td043mtea1_panel *lcd = to_td043mtea1_device(panel);
> + int ret;
> +
> + /*
> + * If we are resuming from system suspend, SPI might not be enabled
> + * yet, so we'll program the LCD from SPI PM resume callback.
> + */
> + if (lcd->spi_suspended)
> + return 0;
> +
> + ret = td043mtea1_power_on(lcd);
> + if (ret) {
> + dev_err(&lcd->spi->dev, "%s: power on failed (%d)\n",
> + __func__, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode td043mtea1_mode = {
> + .clock = 36000,
> + .hdisplay = 800,
> + .hsync_start = 800 + 68,
> + .hsync_end = 800 + 68 + 1,
> + .htotal = 800 + 68 + 1 + 214,
> + .vdisplay = 480,
> + .vsync_start = 480 + 39,
> + .vsync_end = 480 + 39 + 1,
> + .vtotal = 480 + 39 + 1 + 34,
> + .vrefresh = 60,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + .width_mm = 94,
> + .height_mm = 56,
> +};
> +
> +static int td043mtea1_get_modes(struct drm_panel *panel)
> +{
> + struct drm_connector *connector = panel->connector;
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &td043mtea1_mode);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> + drm_mode_probed_add(connector, mode);
> +
> + connector->display_info.width_mm = td043mtea1_mode.width_mm;
> + connector->display_info.height_mm = td043mtea1_mode.height_mm;
> + /*
> + * FIXME: According to the datasheet sync signals are sampled on the
> + * rising edge of the clock, but the code running on the OMAP3 Pandora
> + * indicates sampling on the falling edge. This should be tested on a
> + * real device.
> + */
> + connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
> + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
> + | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs td043mtea1_funcs = {
> + .unprepare = td043mtea1_unprepare,
> + .prepare = td043mtea1_prepare,
> + .get_modes = td043mtea1_get_modes,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Power Management, Probe and Remove
> + */
> +
> +static int __maybe_unused td043mtea1_suspend(struct device *dev)
> +{
> + struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
> +
> + if (lcd->powered_on) {
> + td043mtea1_power_off(lcd);
> + lcd->powered_on = true;
> + }
> +
> + lcd->spi_suspended = true;
> +
> + return 0;
> +}
> +
> +static int __maybe_unused td043mtea1_resume(struct device *dev)
> +{
> + struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
> + int ret;
> +
> + lcd->spi_suspended = false;
> +
> + if (lcd->powered_on) {
> + lcd->powered_on = false;
> + ret = td043mtea1_power_on(lcd);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(td043mtea1_pm_ops, td043mtea1_suspend,
> + td043mtea1_resume);
> +
> +static int td043mtea1_probe(struct spi_device *spi)
> +{
> + struct td043mtea1_panel *lcd;
> + int ret;
> +
> + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
> + if (lcd == NULL)
> + return -ENOMEM;
> +
> + spi_set_drvdata(spi, lcd);
> + lcd->spi = spi;
> + lcd->mode = TPO_R02_MODE_800x480;
> + memcpy(lcd->gamma, td043mtea1_def_gamma, sizeof(lcd->gamma));
> +
> + lcd->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
> + if (IS_ERR(lcd->vcc_reg)) {
> + dev_err(&spi->dev, "failed to get VCC regulator\n");
> + return PTR_ERR(lcd->vcc_reg);
> + }
> +
> + lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(lcd->reset_gpio)) {
> + dev_err(&spi->dev, "failed to get reset GPIO\n");
> + return PTR_ERR(lcd->reset_gpio);
> + }
> +
> + spi->bits_per_word = 16;
> + spi->mode = SPI_MODE_0;
> +
> + ret = spi_setup(spi);
> + if (ret < 0) {
> + dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
> + return ret;
> + }
> +
> + ret = sysfs_create_group(&spi->dev.kobj, &td043mtea1_attr_group);
> + if (ret < 0) {
> + dev_err(&spi->dev, "failed to create sysfs files\n");
> + return ret;
> + }
> +
> + drm_panel_init(&lcd->panel);
> + lcd->panel.dev = &lcd->spi->dev;
> + lcd->panel.funcs = &td043mtea1_funcs;
> +
> + ret = drm_panel_add(&lcd->panel);
> + if (ret < 0) {
> + sysfs_remove_group(&spi->dev.kobj, &td043mtea1_attr_group);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int td043mtea1_remove(struct spi_device *spi)
> +{
> + struct td043mtea1_panel *lcd = spi_get_drvdata(spi);
> +
> + drm_panel_remove(&lcd->panel);
> + drm_panel_disable(&lcd->panel);
> + drm_panel_unprepare(&lcd->panel);
> +
> + sysfs_remove_group(&spi->dev.kobj, &td043mtea1_attr_group);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id td043mtea1_of_match[] = {
> + { .compatible = "tpo,td043mtea1", },
> + { /* sentinel */ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, td043mtea1_of_match);
> +
> +static struct spi_driver td043mtea1_driver = {
> + .probe = td043mtea1_probe,
> + .remove = td043mtea1_remove,
> + .driver = {
> + .name = "panel-tpo-td043mtea1",
> + .pm = &td043mtea1_pm_ops,
> + .of_match_table = td043mtea1_of_match,
> + },
> +};
> +
> +module_spi_driver(td043mtea1_driver);
> +
> +MODULE_ALIAS("spi:tpo,td043mtea1");
> +MODULE_AUTHOR("Gražvydas Ignotas <notasas@xxxxxxxxx>");
> +MODULE_DESCRIPTION("TPO TD043MTEA1 Panel Driver");
> +MODULE_LICENSE("GPL");
> --
> Regards,
>
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
