Re: [PATCH v3 6/9] drm/panel: Add driver for the Sharp LS037V7DW01 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 13, 2019 at 04:33:08PM +0300, Laurent Pinchart wrote:
> This panel is used on the TI SDP3430 board.
> 
> The code is based on the omapdrm-specific panel-sharp-ls037v7dw01
> driver.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>

> ---
> Changes since v1:
> 
> - Mention boards using the panel in Kconfig
> - Renamed ls037v7dw01_device to ls037v7dw01_panel
> - Renamed vcc to vdd
> - Comments updates
> - Store width_mm and height_mm in drm_display_mode
> - Use drm_panel_disable() in .remove() handler
> - Use devm_gpiod_get() where applicable
> - Remove NULL-check on vdd
> - Order Kconfig entries alphabetically
> ---
>  drivers/gpu/drm/panel/Kconfig                 |   7 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  .../gpu/drm/panel/panel-sharp-ls037v7dw01.c   | 226 ++++++++++++++++++
>  3 files changed, 234 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c
> 
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index d28133c6aa0a..8d9a8cdb704e 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -282,6 +282,13 @@ config DRM_PANEL_SHARP_LQ101R1SX01
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called panel-sharp-lq101r1sx01.
>  
> +config DRM_PANEL_SHARP_LS037V7DW01
> +	tristate "Sharp LS037V7DW01 VGA LCD panel"
> +	depends on GPIOLIB && OF && REGULATOR
> +	help
> +	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
> +	  (480x640) LCD panel (found on the TI SDP3430 board).
> +
>  config DRM_PANEL_SHARP_LS043T1LE01
>  	tristate "Sharp LS043T1LE01 qHD video mode panel"
>  	depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 8052f9a7ad60..14d1c49ef3ab 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
>  obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
>  obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> +obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
>  obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
>  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
>  obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> diff --git a/drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c
> new file mode 100644
> index 000000000000..2aaea507cc1f
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-sharp-ls037v7dw01.c
> @@ -0,0 +1,226 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Sharp LS037V7DW01 LCD Panel Driver
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated
> + *
> + * Based on the omapdrm-specific panel-sharp-ls037v7dw01 driver
> + *
> + * Copyright (C) 2013 Texas Instruments Incorporated
> + * Author: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct ls037v7dw01_panel {
> +	struct drm_panel panel;
> +	struct platform_device *pdev;
> +
> +	struct regulator *vdd;
> +	struct gpio_desc *resb_gpio;	/* low = reset active min 20 us */
> +	struct gpio_desc *ini_gpio;	/* high = power on */
> +	struct gpio_desc *mo_gpio;	/* low = 480x640, high = 240x320 */
> +	struct gpio_desc *lr_gpio;	/* high = conventional horizontal scanning */
> +	struct gpio_desc *ud_gpio;	/* high = conventional vertical scanning */
> +};
> +
> +#define to_ls037v7dw01_device(p) \
> +	container_of(p, struct ls037v7dw01_panel, panel)
> +
> +static int ls037v7dw01_disable(struct drm_panel *panel)
> +{
> +	struct ls037v7dw01_panel *lcd = to_ls037v7dw01_device(panel);
> +
> +	gpiod_set_value_cansleep(lcd->ini_gpio, 0);
> +	gpiod_set_value_cansleep(lcd->resb_gpio, 0);
> +
> +	/* Wait at least 5 vsyncs after disabling the LCD. */
> +	msleep(100);
> +
> +	return 0;
> +}
> +
> +static int ls037v7dw01_unprepare(struct drm_panel *panel)
> +{
> +	struct ls037v7dw01_panel *lcd = to_ls037v7dw01_device(panel);
> +
> +	regulator_disable(lcd->vdd);
> +	return 0;
> +}
> +
> +static int ls037v7dw01_prepare(struct drm_panel *panel)
> +{
> +	struct ls037v7dw01_panel *lcd = to_ls037v7dw01_device(panel);
> +	int ret;
> +
> +	ret = regulator_enable(lcd->vdd);
> +	if (ret < 0)
> +		dev_err(&lcd->pdev->dev, "%s: failed to enable regulator\n",
> +			__func__);
> +
> +	return ret;
> +}
> +
> +static int ls037v7dw01_enable(struct drm_panel *panel)
> +{
> +	struct ls037v7dw01_panel *lcd = to_ls037v7dw01_device(panel);
> +
> +	/* Wait couple of vsyncs before enabling the LCD. */
> +	msleep(50);
> +
> +	gpiod_set_value_cansleep(lcd->resb_gpio, 1);
> +	gpiod_set_value_cansleep(lcd->ini_gpio, 1);
> +
> +	return 0;
> +}
> +
> +static const struct drm_display_mode ls037v7dw01_mode = {
> +	.clock = 19200,
> +	.hdisplay = 480,
> +	.hsync_start = 480 + 1,
> +	.hsync_end = 480 + 1 + 2,
> +	.htotal = 480 + 1 + 2 + 28,
> +	.vdisplay = 640,
> +	.vsync_start = 640 + 1,
> +	.vsync_end = 640 + 1 + 1,
> +	.vtotal = 640 + 1 + 1 + 1,
> +	.vrefresh = 58,
> +	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +	.width_mm = 56,
> +	.height_mm = 75,
> +};
> +
> +static int ls037v7dw01_get_modes(struct drm_panel *panel)
> +{
> +	struct drm_connector *connector = panel->connector;
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_duplicate(panel->drm, &ls037v7dw01_mode);
> +	if (!mode)
> +		return -ENOMEM;
> +
> +	drm_mode_set_name(mode);
> +	drm_mode_probed_add(connector, mode);
> +
> +	connector->display_info.width_mm = ls037v7dw01_mode.width_mm;
> +	connector->display_info.height_mm = ls037v7dw01_mode.height_mm;
> +	/*
> +	 * FIXME: According to the datasheet pixel data is sampled on the
> +	 * rising edge of the clock, but the code running on the SDP3430
> +	 * indicates sampling on the negative edge. This should be tested on a
> +	 * real device.
> +	 */
> +	connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
> +					  | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE
> +					  | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
> +
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs ls037v7dw01_funcs = {
> +	.disable = ls037v7dw01_disable,
> +	.unprepare = ls037v7dw01_unprepare,
> +	.prepare = ls037v7dw01_prepare,
> +	.enable = ls037v7dw01_enable,
> +	.get_modes = ls037v7dw01_get_modes,
> +};
> +
> +static int ls037v7dw01_probe(struct platform_device *pdev)
> +{
> +	struct ls037v7dw01_panel *lcd;
> +
> +	lcd = devm_kzalloc(&pdev->dev, sizeof(*lcd), GFP_KERNEL);
> +	if (lcd == NULL)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, lcd);
> +	lcd->pdev = pdev;
> +
> +	lcd->vdd = devm_regulator_get(&pdev->dev, "envdd");
> +	if (IS_ERR(lcd->vdd)) {
> +		dev_err(&pdev->dev, "failed to get regulator\n");
> +		return PTR_ERR(lcd->vdd);
> +	}
> +
> +	lcd->ini_gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW);
> +	if (IS_ERR(lcd->ini_gpio)) {
> +		dev_err(&pdev->dev, "failed to get enable gpio\n");
> +		return PTR_ERR(lcd->ini_gpio);
> +	}
> +
> +	lcd->resb_gpio = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(lcd->resb_gpio)) {
> +		dev_err(&pdev->dev, "failed to get reset gpio\n");
> +		return PTR_ERR(lcd->resb_gpio);
> +	}
> +
> +	lcd->mo_gpio = devm_gpiod_get_index(&pdev->dev, "mode", 0,
> +					    GPIOD_OUT_LOW);
> +	if (IS_ERR(lcd->mo_gpio)) {
> +		dev_err(&pdev->dev, "failed to get mode[0] gpio\n");
> +		return PTR_ERR(lcd->mo_gpio);
> +	}
> +
> +	lcd->lr_gpio = devm_gpiod_get_index(&pdev->dev, "mode", 1,
> +					    GPIOD_OUT_LOW);
> +	if (IS_ERR(lcd->lr_gpio)) {
> +		dev_err(&pdev->dev, "failed to get mode[1] gpio\n");
> +		return PTR_ERR(lcd->lr_gpio);
> +	}
> +
> +	lcd->ud_gpio = devm_gpiod_get_index(&pdev->dev, "mode", 2,
> +					    GPIOD_OUT_LOW);
> +	if (IS_ERR(lcd->ud_gpio)) {
> +		dev_err(&pdev->dev, "failed to get mode[2] gpio\n");
> +		return PTR_ERR(lcd->ud_gpio);
> +	}
> +
> +	drm_panel_init(&lcd->panel);
> +	lcd->panel.dev = &pdev->dev;
> +	lcd->panel.funcs = &ls037v7dw01_funcs;
> +
> +	return drm_panel_add(&lcd->panel);
> +}
> +
> +static int ls037v7dw01_remove(struct platform_device *pdev)
> +{
> +	struct ls037v7dw01_panel *lcd = platform_get_drvdata(pdev);
> +
> +	drm_panel_remove(&lcd->panel);
> +	drm_panel_disable(&lcd->panel);
> +	drm_panel_unprepare(&lcd->panel);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ls037v7dw01_of_match[] = {
> +	{ .compatible = "sharp,ls037v7dw01", },
> +	{ /* sentinel */ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, ls037v7dw01_of_match);
> +
> +static struct platform_driver ls037v7dw01_driver = {
> +	.probe		= ls037v7dw01_probe,
> +	.remove		= __exit_p(ls037v7dw01_remove),
> +	.driver		= {
> +		.name = "panel-sharp-ls037v7dw01",
> +		.of_match_table = ls037v7dw01_of_match,
> +	},
> +};
> +
> +module_platform_driver(ls037v7dw01_driver);
> +
> +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@xxxxxx>");
> +MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
> +MODULE_LICENSE("GPL");
> -- 
> Regards,
> 
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux